• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.737-743
• /
• 2008

Regional odontodysplasia is a relatively rare developmental anomaly of dental hard tissue with characteristic clinical, radiographic and histologic features. It requires a continuous and multidisciplinary approaches, and the aim of treatment for these patients should include aiding mastication, improving aesthetics, maintaining normal vertical dimension and space, allowing normal jaw growth and eruptional management of affected teeth. This report describes three cases of regional odontodysplasia with 2-5 years of follow-up. Conservative treatment is chosen to preserve the affected teeth as long as possible, and periodic radiographic and clinical examination was done. During this time, all teeth except one showed progressive development. An interesting finding observed in our cases was that each tooth even in the same person showed different degree of tooth development and eruption rate. Thus, we colcluded that the treatment plan for regional odontodysplasia should be conservative and individualized and based on the assessment of each tooth.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.247-261
• /
• 1995

The purpose of this study was to quantitate differences in the nature of the correction of Angle's Class II div 1 malocclusion dependent on the patient's age at the time of treatment. The sample consisted of 27 female patients in the adolescent group with a mean initial records age of 11.8 years and 25 female patients in the adult group with a mean starting age of 21.1 yrs. Lateral cephalometric head films were taken before and after orthodontic treatment with four bicuspid extraction. The results were obtained as follows. 1. None of maxillary skeletal parameters exhibited a significantly different in treatment change between adolescents and adults. But, in mandibular skeletal measurements, there were significant differences between two groups. (P<0.05) 2. Measures of vertical dimension in the adults remained unchanged during treatment, reflecting the effective absence of growth. 3. The steepness of occlusal plane in the adults changed significantly.(P<0.05) In contrast, the adolescents displayed stability of the occlusal plane. 4. According to the Johnston analysis, there was a significant difference in the total molar correction between two groups.(P<0.05) 5. According to the Johnston analysis, differential mandibular growth in the adolescents contrubuted $63\%$ of the total molar correction, with orthodontic tooth movement accounting for the remaining $37\%$. In the adults, dental movement comprised $99\%$ of the correction.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.57-67
• /
• 2003

Suppose that dental occlusion is related to body posture. We want to find out that improving occlusal balance may affect vibration and distribution of C.O.P. in which way, by measuring change of posture and center of gravity (center of pressure, C.O.P.) which plays important role in measuring balance sensation. Total 11 students at Kyung Hee dental college students, 4 females and 9 males (age: 23-30) participated in this test, who have normal occlusion (Angle's classification I), no TMJ problems. All of the participants have no tooth loss except 3rd molar, no prosthesis over single tooth restoration, no orthopedic problems which affect balance sensation, and no otorhinolaryngological problems. First, we registrated bite by centric relation, and then fabricated stabilization splint that is increased 3.5mm vertical dimension around premolar region. By F-scan (Tekscan Inc., Boston, Mass), we measured discrepancy of average contact pressure of left and right foot. And we also measured discrepancy of vibration of C.O.P(center of pressure). before setting stabilization splint and after wearing stabilization splint at intervals of 1 week, 2 weeks, 3 weeks after. In normal human beings, improved occlusal balance by stabilization splint leads to decrease of vibration of C.O.P. (P<0.05). One week after wearing stabilization splint, vibration of C.O.P. decreased reliably (P<0.05), two weeks after wearing stabilization splint, vibration of C.O.P. decreased similarly comparing to before wearing and one week after wearing. (P<0.05) After two weeks and three weeks, however, it was hard to find reliability. (P>0.05) Difference between average contact pressure of right and left foot also decreased. (P<0.05) We could find decrease after one week of wearing stabilization splint (P<0.05) and two weeks after, the decrease was more reliable than one week after. (P<0.05) After two weeks and three weeks, however, it was hard to find reliability. Improvement of occlusal balance leads to decrease of vibration of C.O.P. and decrease of difference between right and left average contact pressure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.218-226
• /
• 2018

In partial edentulous patients, implant-assisted removable partial denture which provide additional retention and support by placing a small number of implants in strategic positions might be suitable treatment. This case of patient with loss of maxillary posterior teeth and moderate to severe wear of residual dentition, three implants were placed in the maxillary anterior edentulous area and then surveyed bridges were made including remaining anterior natural teeth. Posterior edentulous area was restored with distal extension removable partial denture (RPD). In addition, the worn mandibular natural teeth were restored with fixed prostheses. As a result, reduced vertical dimension and collapsed occlusal plane were rehabilitated, and improved functionally and aesthetically. The purpose of this case was to report the results of three-year follow-up of full mouth rehabilitation with anterior implant surveyed bridges and distal extension RPD.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.5-13
• /
• 2016

This research is focused on the seepage behavior of embankment which had the weak zone with big permeability. The distributed TDR (Time Domain Reflectometer) and point sensors such as settlement gauge, pore water pressuremeter, vertical total stressmeter, and FDR (Frequency Domain Reflectometer) sensor were used to measure the seepage characteristics and embankment behavior. Also, the measured data were compared to the data of 2-D and 3-D numerical analysis. The dimension of model embankment was 7 m length, 5 m width and 1.5 m height, which is composed of fine-grained sands and the water level of embankment was 1.3 m height. The seepage behavior of measuring and numerical analysis were very similar, it means that the proper sensing system can monitor the real-time safety of embankment. The result by 2-D and 3-D numerical analysis showed similar saturation processing, however in case of weak zone, the phreatic lines of 2-D showed faster movement than that of 3-D analysis, and finally they converged.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.217-227
• /
• 1993

Preadjusted appliance, following the original concept of the Andrews Straight-Wire appliance, became increasingly common in the 1980s. In six phases of treatment, anchorage control, leveling and aligning, overbite control, overjet reduction, space closure, and finishing are very effective with using the preadjusted appliances. Space closure is the phase of treatment in which the difference between standard edgewise and preadjusted mechanics is most noticeable. Orthodontists have been able to reduce the use of closing loops and, because of the level slot lineup, enjoy the advantages of sliding mechanics. In 1990, Dr. John C. Bennett and Richard P. McLaughlin introduced the new space closure system, namely, elastic 'tiebacks'. They found an $.019'\times.025'$ working archwire most effective in an .022'-slot system. Hooks of .024' stainless steel or .028' brass wire are soldered to the upper and lower archwires. The force required for space closure is delivered by elastic 'tiebacks'. An elastic modulo stretched by 2-3mm(to twice its normal length) usually delivers 0.5-1.5mm of space closure per month. Group movement and sliding mechanics are combined for gentle, controlled space closure, so that about 0.5mm of incisor retraction and 0.5mm of mesial molar movement can be seen each month. The tiebacks are replaced every four to six weeks. By using the elastic 'tiebacks', the next two cases were treated during space closure. Even though we found some clinical problems of this mechanics, long treatment time, hard to control of vertical dimension and anchorage, the application method of this system is so simple that orthodontists can manage many patients during short chair time. But we must apply this mechanics after perfect understanding of the biomechanics in tooth movement.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.670-674
• /
• 2005

Supernumerary tooth develops as a result of abnormal proliferation of the dental lamina during the initiation stage of dental development. It could be a sporadic occurrence or a hereditary transmission. Supernumerary tooth occurs with a frequency of 1 to 3%. Generally, there is a 2:1 preference for boys. It is usually found in the anterior portion of the maxilla and may be associated with complications such as impaction, malposition of permanent teeth, formation of diastema, cysts and eruption into nasal cavity, The position of supernumerary tooth found in the anterior portion of the maxilla is determined by the axis of the tooth. One third of supernumerary tooth in the anterior portion of the maxilla has no possibility of eruption due to its invertedly impacted position. However, as long as the coronal part of the follicle remains intact, migration of supernumerary tooth is possible. The migration may occur into the palate, the premolar region, the sinus or the nasal cavity. Also, growth of vertical dimension of maxilla could make surgical approach difficult as time goes by For this reason, we have found invertedly impacted mesiodens moved to the vault of the palate in the two cases, and extracted supernumerary tooth surgically.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.368-373
• /
• 2010

The incisors function as instruments for biting and cutting food during mastication. They also support the lips and face and maintain vertical dimension. In addition, they contribute to overall normal arch appearance. They play important role during the articulation of speech and assist in guiding jaw closure. Extraction and space maintenance are the most common treatment for a tooth with poor prognosis. However, in the mixed dentition, extraction of the upper permanent incisors results in many complications, such as resorption of alveolar bone, poor esthetics, pronunciation, and mastication. Considering these various roles of incisors in oral cavity, approach for traumatized incisors, even the ones with poor prognosis, should be considered first prior to simple extraction. The dentist must take into account the age of the patient, growth potential, occlusion, oral hygiene status, economic status and motivation towards dental health in addition to patient compliance. In this case, although the prognosis was predicted to be unfavorable due to short root and mobility, we could save the central incisor using conservative treatment, reposition by orthodontic appliance instead of extraction.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.259-271
• /
• 2013

The purpose of this study was to make the stress distribution produced by simulated different load under two types of internal connection implant system (stepped and tapered type) by means of 3D finite element analysis, The finite element model was designed with the parallel placement of the one fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st molar. Two models were loaded with 200 N magnitude in the vertical direction on the central position of the crown, the 1.5 mm and 3 mm buccal offset point from the central position of the fixture. The oblique load was applied at the angle of $30^{\circ}$ on the crown surface. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual dimension. The results were as follows; 1. The loading conditions of two internal connection implant systems (stepped and tapered type) were the main factor affecting the equivalent bone strain, followed by the type of internal connections. 2. The stepped model had more mechanical stability with the reduced max. stress compared to $11^{\circ}$ tapered models under the distributed oblique loading. 3. The more the contact of implant-abutment interface to the inner wall of implant fixture, the less stress concentration was reduced.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.69-75
• /
• 2004

Purpose : A new fiduciary plate and orientation marker have been devised to assist the quality assurance (QA) procedures for port films in radiation therapy department. The plate is used in conjunction with the film/cassette combination during weekly QA procedures, at Seoul National University Hospital (SNUH), in order to verify treatment fields in high radiation therapy. Materials and Methods : A new fiduciary plate was fabricated using an acrylic plate, cerrobend, standard blocking tray and mercury. The acrylic plate had the dimension of $1{\times}25{\times}25$ cm, with two fiduciary markers. The plate was rigidly attached onto the standard blocking tray, thus making it easier to set the fiduciary plate to the center on the radiation field on the linear accelerator. The plate had two 2-mm vertical and horizontal lines, with the minor scales in 2-cm steps. The orientation marker was a small mercury filled disk, which was inserted into the plate. Results : The geometrical structure of the lines in the plate makes it easier to correlate two different images between the simulation and port films. The marker clearly indicated the orientation of the film, for example, the anterior, posterior, left, right and various oblique orientations, without the placement of a conventional orientation marker. Also, the new orientation marker could easily be applied to the simulator by placing the small orientation marker onto the image intensifier or in front of the film/cassette holder. Conclusions : The new fiduciary plate appears to be useful in verifying the treatment fields, and the new orientation marker makes the film orientation simple, which is expected to lower the block fabrication errors.