• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.162-166
• /
• 2011

In railway, Tie supports rail and plays a role that distribute train load to the ballast. Also, Tie and ballast resist against external force and fix the track position. But, weakening resistance of ballast and tie cause vertical displacement of tie and track irregularity. For reinforcement of track stiffness and reduction of track irregularity, KORAIL has developed Multi Branch type tie(GLORY Tie) that reinforced resistance than general PCT and installed in order to test in the field. This study measured and analyzed lateral resistance of ballast, wheel load of rail, bending strain of rail foot, vertical displacement and vibration acceleration of tie in order to evaluate performance of Multi Branch type tie in the field. According to the results of test, Multi Branch tie is excellent than general tie about lateral resistance of ballast and vertical displacement of tie. And, gap of measurement value between Multi Branch type tie and general tie about wheel load of rail, bending strain of rail foot were very small.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.107-113
• /
• 2017

The dynamic characteristics including natural frequencies and excitation frequencies are evaluated for a small 10 kW vertical axis wind turbine. Acceleration responses were measured at 12 distributed locations for impact vibration tests, ambient vibration tests during non-operational and operational conditions, and braking tests during operational condition. The natural frequencies for the lowest 2 bending modes and the first torsional mode were estimated and also the excitation frequencies, i.e. 1P, 2P, 4P, were also estimated according to the rotational speed using the responses under operational conditions (i.e. power generation condition).

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.151-158
• /
• 1999

The single layer latticed domes have various behaviors with each geometrical shape and scale, and they are affected by vertical component as well as horizontal component of the dynamic load. And they represent very different earthquake responses under each ground acceleration compared with another structural systems. Generally, all of the members of latticed domes undergo three dimensional deflections if they are subjected to arbitrary one dimensional horizontal load under earthquake motions. And their response characteristics are very different to their shapes, rise/span ratios, and damping mechanisms. In this study the .earthquake response behavior is verified according to the factor of each shape, rise/span ratio, ana damping ratio of latticed domes, which undergo horizontal and vertical earthquake motions by numerical approaches.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.478-481
• /
• 2009

As a first step for aerodynamic analysis of vertical axis wind turbine, dynamic stall characteristics of airfoil was investigated. Dynamic stall of wind turbine airfoil is caused by severe variation of angle of attack and relative velocity of flow around airfoil. Angle of attack and relative velocity can be expressed with tip speed ratio. Variation of angle of attack is strongly dependent on the tip speed ratio. For tip speed ratio, 1.4 and free stream velocity, 15m/s, dynamic stall characteristics of wind turbine airfoil is compared with those of oscillating airfoil having same angle of attack variation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.489-496
• /
• 1998

The single layer latticed domes have various behaviors with each geometrical shape and scale, and they are affected by vertical component as well as horizontal component of the dynamic load. And they represent ye different earthquake responses under each ground acceleration compared with another structural systems. Generally, all of the members of latticed domes undergo three dimensional deflections if they are subjected to arbitrary one dimensional horizontal load under earthquake motions. And their response characteristics are very different to their shapes, rise/span ratios, and damping mechanisms. In this study, the earthquake response behavior is verified according to the factor of each shape, rise/span ratio, and damping ratio of latticed domes, which undergo horizontal and vertical earthquake motions by numerical approaches.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1309-1313
• /
• 2010

In this paper, we propose a novel guidance law for controlling an UAV(Unmanned Air-Vehicle) to follow a reference line in vertical plane. A kinematics model representing the relative motion of the UAV to the reference line is derived. And then LQR(Linear Quadratic Regulator) theory is applied to the model to derive the VLFG(Vertical Line Following Guidance) law. The resultant guidance law forms a gain-scheduling controller scheduled by a simple parameter $\sigma$ which is a function of the UAV's velocity, axial acceleration, gravity, and the slope of the reference line. Also derived is a stability condition for the $\sigma$ variation based on Lyapunov theory. Simulation results show that the proposed guidance law can be applied effectively to UAV guidance algorithm design.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.360-367
• /
• 2003

This paper presents passive vibration control method to suppress train-induced vibration on a long-span steel arch bridge. According to the train load frequency analysis, undesirable resonance of a bridge will occur when the impact frequency of the train axles are close to the modal frequencies of the bridge. Because the first mode shape of the long-span steel arch bridge may take anti-symmetric shape along the bridge direction, however, the optimal control configuration for resonance suppression should be considered carefully In this study, bridge-vehicle element is used to estimate the bridge-train interaction precisely. From the numerical simulation of a loom steel arch bridge under TGV-K train loading, dynamic magnification influences are evaluated according to vehicle moving speed and efficient control system with passive dampers are presented in order to diminish the vertical displacement and vertical acceleration.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.70-81
• /
• 2024

본 연구에서는 진동원으로서 교통하중(고속열차)에 대해 수직 방진기능과 수평 면진기능을 조합한 3차원 하이브리드 면진시스템(Tridimensional Hybrid Isolation System, THIS)을 제안하였고, 고속열차 진동에 대한 THIS의 수직 진동 사용성 개선 효과를 해석적으로 평가하였다. 해석을 위하여 실제 16층의 공동주택을 상용구조해석프로그램의 고유치해석과 침실 바닥판에 대한 펄스 응답 분석을 통해 주요 진동모드를 식별하였고, 이 주요 진동 모드를 가지고 바닥판의 수평과 수직, 회전 자유도를 가지는 16개 층의 골조 모델을 제작하였다. 해석방법은 실제 고속철도가 통행할 때 철로와 인접한 구조물에서 계측한 가속도를 진동원으로 적용하고 THIS의 강성과 감쇠비를 변수로 상태-공간방정식을 이용하여 동적해석을 수행하였다. 그 결과, 기존 구조물의 수직 고유주기 대비 THIS의 수직 주기가 커질수록 층별 바닥판 응답이 저감되기 시작하는 임계 주기비가 다르고, 주기가 5배 이상(0.006 이하의 강성비)일 때 모든 바닥판의 가속도 수준이 비면진 대비 약 70% 이하로 감소하였다. 또한, THIS의 감쇠비에 대한 응답 제어에 미치는 영향이 매우 적은 것으로 나타났다. 마지막으로 THIS에 대한 수직 진동 사용성 개선 효과를 확인하기 위하여 비면진 구조물과 0.006의 강성비와 0.03의 감쇠비를 가지는 THIS가 적용된 구조물에 대하여 1층과 16층 바닥판 가속도를 AIJ, SCI, AISC 진동 사용성 기준에 따라 평가하였고, 기존에 주거지 사용성 기준을 만족하지 못한 데 반해, THIS 적용 후 주거지 사용성 기준을 모두 만족하는 것을 확인하였다.

• 대한토목학회논문집
• /
• 제31권4C호
• /
• pp.109-116
• /
• 2011

본 연구에서는 수직구의 동적 거동특성 분석을 위하여 지반조건, 입력하중 특성, 하중 방향 등의 주요 인자를 고려하여 3차원 유한요소해석을 수행하였다. 그 결과로, 다층지반에 시공된 수직구는 하부 단단한 지층이 두꺼울수록 전단력과 휨모멘트가 최대 1.7배 크게 발생되며, 지층이 변화하는 경계면에서 가장 큰 단면력이 발생된다. 또한 입력하중의 주기 특성에 따라 수직구 동적거동은 서로 다르며, 수직구와 주변지반에서의 가속도 증폭 비율은 주변지반에서 최대 3배 이상 크게 나타났다.

• 대한기계학회논문집B
• /
• 제29권12호
• /
• pp.1321-1328
• /
• 2005

The burning characteristics of interacting coal particles in a convective flow are numerically investigated at various Reynolds numbers. The transient combustion of 2-dimensionally arranged particles, both the fixed particle distances of 5 radii to 20 radii horizontally and 4 radii to 24 radii vertically, is studied. The results obtained from the present numerical analysis indicate that the transient flame configuration and retardation of particle temperature augmentation with the horizontal or vertical particle spacing substantially influence devolatilization process and carbon conversion ratio of interacting particles. Volatile release and carbon conversion ratio of the second particle with decreasing horizontal and vertical particle spacing decrease gradually, whereas those of the first particle with decreasing vertical particle spacing increase due to flow acceleration. When the vertical particle spacing is smaller than $6R_0$, volatile release and carbon conversion ratio of the second particle decrease due to reduction of flame penetration depth and interference of oxygen diffusion by the first particle.