• 제목/요약/키워드: vent width

검색결과 20건 처리시간 0.022초

반구형 도화새우통발에 있어서 적정 탈출구의 설계 (Optimal design of escape vent for the dome type coonstrip shrimp (Pandalus hypsinotus) pot)

  • 김성훈;이주희;김형석;박성욱
    • 수산해양기술연구
    • /
    • 제46권2호
    • /
    • pp.115-125
    • /
    • 2010
  • In order to design the optimal escape vent for the coon strip shrimp pot, the tank experiments were conducted with the model pot of five different slit height and slit width, respectively. The optimal height and width of escape vent were determined to 20mm and 40mm by tank experiments, respectively. These were determined by the 50% selection carapace length which was denoted to 25mm in selectivity curve. The escape experiments were conducted to determine a number of escape vent with the original shrimp pot to be set the designed escape vent from 2 vents to 10 vents increasing at intervals of 2 vents in tank. The optimal number of escape vents denoted 8 vents. Therefore, to apply the escape vent in commercial shrimp pot will be efficient to reduce small size shrimps to catch.

실내 가스 폭발시 폭발압력 방출에 관한 연구 (A Study on the Explosion Relief Venting in the Gas Explosion)

  • 오규형
    • 한국안전학회지
    • /
    • 제20권3호
    • /
    • pp.71-77
    • /
    • 2005
  • This study aims to find the safe vent area to prevent a destruction of building by gas explosion in a building. Explosion vessel which used in this experiment is 1/5 scale down model of simple livingroom and its dimension is 100cm in length 60cm in width and 45cm in height. Liquified petroleum gas(LPG) was injected to the vessel to the concentration of 4.5vol%, and injection rate were varied in 1L/min or 4L/min. Gas mixture was ignited by the 10kV electric spark. For analysis the characteristics of vented explosion pressure according to the vent size and vent shape, its size and shape were varied. From the experiment, it was found that explosion pressure in the vented explosion :in affected by the gas injection rate, vent area and vent shape. And the vent area to volume ratio(S/V) to prevent the building destruction by explosion pressure, it is recommended that the design of vent area happened by the explosion should be above 1/500cm in S/V. And if the vent area has complicate structure in same area, vented explosion pressure will be higher than a single vent, and possibility of building destruction will increase. Therefore to effectively vent the explosion pressure for protect a building and residents from the gas explosion hazards, the same vent area should have a singular and constant shape in the cross-sectional area of the vessel.

상용 열유동 해석 소프트웨어를 이용한 다이캐스팅 칠벤트의 성능평가 (Evaluation on Performance of Chill Vent in High Pressure Die Casting by Using a Commercial Software)

  • 강복현;김태범;김기영
    • 한국주조공학회지
    • /
    • 제32권3호
    • /
    • pp.133-137
    • /
    • 2012
  • Chill vent has a zigzag venting path which allows residual air or gases to exhaust out very quickly from the die cavity. However molten metal sometimes comes out through the gas venting surfaces causing flash. Effect of designing factors of chill vent and processing variables in high pressure die casting on the performance of chill vent was investigated through a series of calculations by using a commercial code. The most influential factor was the thickness of chill vent, followed by inlet velocity, vent width and die temperature.

수직갱이 설치된 터널내 화재시 연기거동에 관한 실험적 연구 (An Experimental Study of Smoke Movement in Tunnel Fires with a Vertical Shaft)

  • 이성룡;유홍선;김충익
    • 설비공학논문집
    • /
    • 제16권2호
    • /
    • pp.135-141
    • /
    • 2004
  • The present paper concerns a smoke movement in a tunnel fire with a vertical shaft. The model tunnel measured 13.4m long, 0.4m wide and 0.4m high. The cross section is 1: 20 of a full scale tunnel. Ethanol was used as a fuel. The fire size in model tests varied from 1.35 kW to 13.37 kW, which corresponds to full scale fires of 2.41 to 23.91 MW. Smoke front velocity and temperatrue were decreased due to the vertical shaft install. Temperature was reduced maximum about 2$0^{\circ}C$ at ceiling and about 23$^{\circ}C$ at vertical position. CO concentration was reduced as the vent width widened. When vent width was more than 15 cm, CO concentration was not reached 100 ppm. Descent degree of the smoke layer was confirmed through the visualization.

Investigation on flutter mechanism of long-span bridges with 2d-3DOF method

  • Yang, Yongxin;Ge, Yaojun;Xiang, Haifan
    • Wind and Structures
    • /
    • 제10권5호
    • /
    • pp.421-435
    • /
    • 2007
  • A two-dimensional flutter analysis method (2d-3DOF method) was developed to simultaneously investigate the relationship between oscillation parameters and aerodynamic derivatives of three degrees of freedom, and to clarify the coupling effects of different degrees of freedom in flutter instability. With this method, the flutter mechanism of two typical bridge deck sections, box girder section and two-isolated-girder section, were numerically investigated, and both differences and common ground in these two typical flutter phenomena are summarized. Then the flutter stabilization effect and its mechanism for long-span bridges with box girders by using central-slotting were studied by experimental investigation of aerodynamic stability and theoretical analysis of stabilizing mechanism. Possible explanation of new findings in the evaluation trend of critical wind speed through central vent width is finally presented.

FDS를 이용한 실규모 공연장 무대 내 화재 시 연기 거동 분석: 방화막 및 자연배출구 면적의 영향 (Analysis of Smoke Behavior in Fire within Real-scale Theater Using FDS: Influences of Fire Curtain and Natural Smoke Vent Area)

  • 김재한;이치영;정이규;김동균
    • 한국화재소방학회논문지
    • /
    • 제32권6호
    • /
    • pp.7-14
    • /
    • 2018
  • 본 연구에서는 방화막 및 자연배출구 면적이 공연장 무대 화재 시 연기 거동에 미치는 영향에 대해 Fire Dynamics Simulator (FDS)를 이용하여 전산시뮬레이션(Numerical simulation)을 수행하였다. 공연장의 무대 크기는 폭 31 m, 깊이 34 m, 높이 32 m로 설정하였고, 자연배출구 면적은 무대 바닥면적의 약 10%, 약 8%, 약 5%, 약 1%로 하였다. 방화막은 프로시니엄(Proscenium) 벽과 0.5 m 이격하여 설정하였다. 방화막과 자연배출구 면적은 객석으로의 연기유출, 자연배출구 및 프로시니엄 개구부를 통한 유입 및 유출 질량 유량에 지대한 영향을 미치는 것으로 관찰되었고, 동일한 자연배출구 면적 조건에서 방화막이 설치된 경우가 미설치된 경우에 비해 무대 내 압력이 더 낮은 것으로 나타났다.

단동 비닐하우스의 지붕 환기장치 설치방법 개선이 참외생육 및 과실수량에 미치는 영향 (Effects of Modified Installation Methods of Roof Ventilation Devices in the Single-span Plastic Greenhouses on Yield and Fruit Quality of Oriental Melon)

  • 여경환;유인호;최경이;이성찬;이재한;박경섭;이중섭
    • 생물환경조절학회지
    • /
    • 제25권4호
    • /
    • pp.334-342
    • /
    • 2016
  • 지붕 환기장치 설치방법의 개선에 의한 작물 재배효과를 검증하고자 농가현장에서 개선 지붕 환기방식과 관행환기방식을 비교, 분석하였다. 개선 지붕 환기방식은 참외재배 단동 플라스틱 온실(폭 5.6m, 길이 108m, 측고 1.1m, 동고 2.2m)에 지붕 환기팬(용량 $38m^3/min$)과 환기통(지름 60cm)을 각각 15m와 6m 간격으로 설치하였고, 대조구로서 관행 지붕 환기방식은 각각 20m와 8m 간격으로 설치하였다. 관행 및 개선 지붕 환기 방식에 따른 생육을 조사한 결과, 관행 환기통과 환기팬 처리에 비해 개선 환기통과 개선 환기팬 처리에서 경경, 엽장, 엽병장, 및 엽폭의 값이 낮게 나타나는 경향을 보였다. 생육기 전반부에 관행 환기통 처리는 환기팬 처리에 비해 절간장이 다소 길게 발달하였는데 이는 착과수가 환기팬 처리에 비해 적었고, 착과수 감소로 인해 동화산물이 잎과 줄기의 신장부로 좀 더 이동된 영향으로 판단되었다. 참외재배 단동 비닐하우스에서 과실 수량을 조사한 결과, 개선 환기팬과 개선 환기통 처리는 관행처리에 비해 과중은 약간 작았지만, 착과수 증가로 인해 전체 수량은 높게 나타났다. 개선 환기팬과 개선 환기통 설치 하우스에서는 관행 지붕 환기 하우스에 비해 상품과율이 높았으며, 10a당 상품수량도 각각 8,391kg, 7,283kg 으로 나타나 관행 지붕 환기에 비해 개선 환기팬 처리는 661kg, 개선 환기통 처리는 487kg 더 증가하였다. 개선 환기팬 처리는 고온기에 암꽃수와 착과수가 가장 많았고, 낙과수는 가장 낮게 나타났으며, 관행의 환기통 처리에 비해 과실의 크기는 작았다. 시기별 환기방식에 따른 참외 과실의 품질을 조사한 결과, 관행 환기통 환기에서 과중, 과경, 과폭, 및 과육두께가 가장 높게 나타났으나, 과폭, 과육두께에 있어서 통계적인 유의차는 나타나지 않았다.

한국산 도롱뇽의 포식압과 서식지에 따른 polyphenism (The different Polyphenism by the Level of Predation Risk and Habitat in Larval Salamander, Hynobius ieechii)

  • 황지희;정훈
    • 한국환경생태학회지
    • /
    • 제24권6호
    • /
    • pp.744-750
    • /
    • 2010
  • 본 연구는 서식지와 포식압에 따라 머리 크기가 서로 다르게 나타나는 polyphenism에 대하여 한국산 도롱뇽 유생을 대상으로 이루어졌다. 인왕산과 수락산, 경기도 광주에서 채집해 온 도롱뇽의 알(난괴)을 서식지 특성과 포식압에 따라 4가지 그룹으로 나누었다. 서식지는 계곡 형과 웅덩이 형 두 그룹으로 나누었고, 포식압은 높음과 포식압 없음, 두 그룹으로 나누었다. 포식압 수준은 하루에 포식자의 cue에 노출된 빈도로 나누었으며 높은 수준은 하루 세 번으로 하였다. 포식 cue는 버들치의 냄새를 추출하여 사용하였고, 알 채집일 다음날부터 부화 후 일주일까지 cue에 노출시켰다. Chemical cue 노출 처리가 끝나는 부화 후 일주일이 되는 날, 각 도롱뇽 유생의 머리 중 가장 넓은 부분과 눈이 있는 부분의 길이, 그리고 snout-vent length를 측정하였다. 눈이 있는 부분의 길이는 머리 중 가장 넓은 부분으로 나눈 수치를 이용하여 통계 처리를 하였으며 결과는 다음과 같다. 도롱뇽 유생의 머리 크기 비율은 포식압의 수준이 높음에 따라 의미 있게 증가하였다. 또한 계곡형 서식지에 사는 도롱뇽 유생의 머리는 버들치의 cue에 반응하여 포식압이 높을 때 머리 크기 비율이 의미 있게 증가하지만, 웅덩이형 서식지에 사는 도롱뇽 유생은 무의미한 결과가 나타났다. 그리고 snout-vent length의 길이는 서식지와 상관없이 높은 포식압에서 증가하는 경향이 나타났다.

쇠살모사 개체군의 성적 크기이형 (Sexual Size Dimorphism in the Red-tongued viper snake(Gloydius ussuriensis) of Population)

  • 김병수;오홍식
    • 한국환경생태학회지
    • /
    • 제28권5호
    • /
    • pp.542-549
    • /
    • 2014
  • 이 연구는 2006년 5월부터 2009년 6월까지 제주도와 작은 부속섬인 가파도 두 지역에 서식하는 쇠살모사 개체군간 몸의 크기와 성적크기이형 및 이에 따른 환경요인을 밝히고, 종 다양성 유지에 필요한 자료를 제공하기 위하여 이루어졌다. 연구결과, 제주도 개체군의 몸길이는 암컷 242-532mm ($422.0{\pm}46.7mm$, n = 100), 수컷 296-580mm ($434.5{\pm}51.7mm$, n = 63)이었고, 가파도 개체군의 몸길이는 암컷 205-395mm ($335{\pm}43.6mm$, n = 55), 수컷 215-430mm ($328{\pm}39.4mm$, n = 73)으로 암수 모두 제주도 개체군이 가파도 개체군에 비해 큰 것으로 나타났다(암컷 t = 17.343, df = 115, P<0.001; 수컷 t = 19.128, df = 101, P<0.001). 성적크기이형 지수(SSD)는 제주도 개체군이 -0.03으로 수컷이 다소 크고, 가파도 개체군은 0.02로 암컷이 다소 컸다. 이처럼 제주도 개체군과 가파도 개체군이 몸의 크기에 있어 차이가 나타나는 것은 서로 다른 환경에 적응된 결과라 판단된다. 또한 두 지역 개체군 및 새끼의 성적크기이형은 제주도 개체군의 몸길이는 수컷이 암컷보다 다소 컸으나(t = -2.011, df = 117, P<0.05), 가파도 개체군과 새끼에서는 유의한 차이가 없었다. 제주도 개체군에서 머리 길이(F = 6.318, $df_{1,2}$ = 1,117, P<0.05), 머리 폭(F = 8.090, $df_{1,2}$ = 1,117, P<0.01), 눈 사이 거리(F = 15.898, $df_{1,2}$ = 1,117, P<0.001) 및 꼬리 길이(F = 238.488, $df_{1,2}$ = 1,111, P<0.001)에서 수컷이 암컷보다 컸으며, 체중은 암컷이 수컷보다 무거운 것으로 나타났다(F = 64.111, $df_{1,2}$ = 1,114, P<0.001). 가파도 개체군에서는 머리 길이, 머리 폭, 눈 사이 거리에서는 암컷과 수컷 간에 유의한 차이는 없었고, 꼬리 길이에서 수컷이 암컷보다 길었으며(F = 168.555, $df_{1,2}$ = 1,74, P<0.001), 체중은 암컷이 수컷보다 무거운 것으로 나타났다(F = 17.812, $df_{1,2}$ = 1,76, P<0.001). 새끼에서는 머리길이, 머리 폭, 눈 사이 거리에서 유의한 차이가 없었으나, 꼬리 길이(F = 67.793, $df_{1,2}$ = 1,72, P<0.001)와 체중(F = 4.558, $df_{1,2}$ = 1,72, P<0.05)에서 수컷이 암컷보다 크게 나타났다. 새끼에서 성적크기이형 현상이 나타나지 않았던 몸길이, 머리길이, 머리 폭 및 눈 사이 거리가 제주도 개체군에서는 모두 수컷이 암컷보다 큰 것으로 나타나 제주도 개체군에서의 성적크기이형 현상은 성장과정에서 생기는 것이라 판단된다.

한국산 도롱뇽의 구애 행동, 싸움행동 및 신체적 특징 (Courtship, Fighting Behaviors and Sexual Dimorphism of the Salamander, Hynobius leechii)

  • 박시룡;박대식;양서영
    • 한국동물학회지
    • /
    • 제39권4호
    • /
    • pp.437-446
    • /
    • 1996
  • 한국산 도롱뇽(Hynobius leechii)의 암수의 신체적 특성 및 구애,싸움 행동에 대한 연구를 수행하였다. 몸의 길이, 코부터 총배설까지의 길이, 몸의 길이에 대한 코부터 총 배설강까지 길이의 비에 있어서 암컷이 수컷보다 더 길었으며, 수컷들은 몸의 길이, 코부터 총배설까지의 길이, 머리의 넓이, 꼬리부터 총배설까지의 길이, 꼬리의 넓이의 5개 요소에 있어서 모든 요소들이 서로 유의미한 상관을 보인 반면, 암컷에 있어서는 꼬리의 넓이를 제외한 모든 요소에서 의미 있는 상관을 보였다. 체외수정을 하는 한국산 도롱뇽의 성적인 행동은 암컷을 확인하는 단계,암컷을 유인하는 단계, 그리고 수정 단계로 구성되어진다. 안컷을 확인하는 단계는 암컷에게로 접근 행동 및 서로 코를 맞대는 행동으로 구성되며, 유인단계에서는 턱부비기, 꼬리치기, 냄새맡기, 파기의 네 가지의 과시 행동이 나타났다. 수정의 과정은 포집, 암컷으로부터 알주머니의 분리, 알의 수정, 수정 후 과시행동으로 구성되었다. 싸움 행동은 간단한 편으로, 공격하는 개체는 상대편의 위턱이나 뒷다리 부근을 주로 물었으며, 문 상태에서 자신의 머리를 2-3회 흔드는 행동을 보였다. 대부분의 경우에 있어서 개체의 크기에 상관없이 공격을 당한 개체는 공격한 개체로부터 재 빨리 회피를 하였으며, 승리를 한 개체는 빠른 꼬리치기 과시 행동을 보였다.

  • PDF