• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.261-272
• /
• 2009

An experimental study of the accelerated weathering was performed to investigate the variations of physicomechanical properties of deteriorated rocks due to freeze-thaw weathering for the Jurassic granite specimens from Wonju, Gangwon-do. Each complete cycle of freeze and thaw was lasted 24 hours, comprising 2 hours saturating in vacuum chamber, 8 hours freezing at -20$\pm1^{\circ}C$ and 14 hours thawing at room temperature. Freeze-thaw cycles were implemented with measuring the index physical properties as well as geometries of microfractures. The seismic velocity was found to decrease with increasing freeze-thaw cycles. On the other hand, absorption tends to increase with freeze-thaw cycles. In the end, it was concluded that variations of the index properties of deteriorated specimen depend on its initial properties and flaws in rock. The size and density of the traces of the microfracture on slab specimen were changed continuously with increasing freeze-thaw weathering. The results obtained in this study show that the box fractal dimension($D_B$) has the strong capability of quantifying the combined effect of size and density of the microfractures.

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.146-157
• /
• 2009

An experimental study of accelerated weathering on mudstone sample specimens from Haman, Gyeongnam was performed to investigate the variations of physico-mechanical properties of deteriorated rocks due to freeze-thaw weathering. Each complete cycle of freeze and thaw lasted 24 hours, comprising 2 hours of saturating in vacuum chamber, 8 hours of freezing at $-16{\pm}1^{\circ}C$ and 14 hours of thawing at room temperature. Total of 55 cycles of freeze-thaw were completed with measuring the index properties as well as geometries of microfractures. The measured specific gravity and P-wave velocity found to decrease with increasing freeze-thaw cycles. On the other hand, absorption ratio and effective porosity were continuously increased with increasing freeze-thaw cycles. It was found that the index properties of deteriorated sample specimen depend on its initial properties and flaws in rock. The size and density of the traces of the microfracture on slab specimen exhibited abrupt changes after 30 cycles of freeze-thaw weathering. The results obtained in this study show that the box fractal dimension($D_B$) given in this paper has the strong capability of quantifying the size and density of the microfracture.

• Physical Therapy Korea
• /
• v.17 no.3
• /
• pp.77-86
• /
• 2010

The purpose of this study was to investigate the variations in gait parameters in terms of the type of arm sling used in hemiplegic patients. Ten patients with hemiplegia and ten healthy adults participated in this study and walked at self-selected speeds on a GAITRite-instrumented carpet. The activities of the opposite shoulder girdle muscle including the latissimus dorsi, anterior deltoid, and posterior deltoid were simultaneously recorded using surface EMG during gait. They were randomly assigned a condition: without an arm sling, a single strap arm sling, a Harris hemi arm sling, a Rolyan humeral cuff arm sling, and a Bobath roll arm sling. The following gait variables were analyzed: the temporo-spatial parameters of velocity, step length, stride length, swing phase, stance phase, single support, step time and toe in/toe out. The statistical analysis was one-way ANOVA with repeated measures to compare the variation of each variable. In comparison of parameters in each trial in the hemiplegia group, the non-affected side stride length, single support, and toe in/toe out resulted in statistically significantly changes (p<.05). But without an arm sling group did not show any gait parameter differences with arm slings. This study found that several arm slings varied gait patterns in patients with hemiplegia and in healthy adults. In the EMG analysis, the Rolyan humeral cuff arm sling and the Bobath roll arm sling were higher muscle activity for the latissimus dorsi muscle than did the single strap ann sling. Further study should examine the problems that appeared in patients who worn arm slings by focusing on a larger number of subjects and by studying the variety of responses in more detail using an assessment tool that measures variation.

• Ocean and Polar Research
• /
• v.40 no.2
• /
• pp.69-75
• /
• 2018

We investigated the effects of environmental variations on the growth and survival rate of Stichopus japonicus to determine the optimum environmental conditions for its growth. Literature studies and a 12 month-long diver survey were carried out to understand the habitat, ecology and size of the surveyed area. Based on the collected data, we suggested optimum habitat conditions for releasing S. japonicus. Experiments on releasing S. japonicus were conducted in the breakwater of the Hwagye fishing cooperative in Hwagey-ri, Namhae-un, Gyeongsangnam-do, Korea. To implement the experiments, we divided the surveyed area into 4 sub-areas with different characteristics: (1) sand and silt zone; (2) artificial sea cucumber bank zone; (3) artificial rock bank zone; and (4) marine algae zone. The experiment lasted for 12 months. We released 32,000 sea cucumbers over $120m^2$ of each of the sand and silt zone, artificial rock bank zone and marine algae zone and released 6,000 sea cucumbers over $120m^2$ of the artificial sea cucumber bank zone. The average density of the released sea cucumbers from day 30 to day 360 after the releasing was conducted was the highest in the artificial sea cucumber bank zone ($23.7animal/m^2$), which was followed by artificial rock bank zone ($2.0animal/m^2$), marine algae zone ($1.9animal/m^2$) and sand and silt zone ($0.8animal/m^2$). The analysis on growth showed that the initial average weight of 2.3 g increased on day 360 after the releasing to 12.5 g in the artificial sea cucumber rank zone, 20.2 g in the sand and silt zone, 23.3 g in the artificial rock bank zone and 22.9 g in the marine algae zone. Results from the experiment along with the literature analysis suggest the following optimum habitat conditions: $10-15^{\circ}C$ water temperature; 28-34 psu salinity; 5-10 m water depth; 0.2-0.5 m/s velocity; rock, stone and muddy sand as substrate; and less than 20% mud in the substrate.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2014

Using the level set and the meshfree methods, we develop a topological shape optimization method applied to linear elasticity problems. Design gradients are computed using an efficient adjoint design sensitivity analysis(DSA) method. The boundaries are represented by an implicit moving boundary(IMB) embedded in the level set function obtainable from the "Hamilton-Jacobi type" equation with the "Up-wind scheme". Then, using the implicit function, explicit boundaries are generated to obtain the response and sensitivity of the structures. Global nodal shape function derived on a basis of the reproducing kernel(RK) method is employed to discretize the displacement field in the governing continuum equation. Thus, the material points can be located everywhere in the continuum domain, which enables to generate the explicit boundaries and leads to a precise design result. The developed method defines a Lagrangian functional for the constrained optimization. It minimizes the compliance, satisfying the constraint of allowable volume through the variations of boundary. During the optimization, the velocity to integrate the Hamilton-Jacobi equation is obtained from the optimality condition for the Lagrangian functional. Compared with the conventional shape optimization method, the developed one can easily represent the topological shape variations.

• Korean Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.1-10
• /
• 2008

The seasonal variations of water quality and periphyton were investigated in an artificial stream (the Cheonggyecheon Stream) flowing through the Seoul City. TP showed a longitudinal gradient: 10 to $59{\mu}gP\;L^{-1}$ in the upper stream sites, and 15 to $90{\mu}gP\;L^{-1}$ in downstream sites. POP was a major form of TP in the water, occupying over 60%, while the proportion of DIP was less than 10% except for St. 4. N/P atomic ratio ranged from 78 to 554, which implies phosphorus would limit algal growth more than nitrogen. The biomass of periphyton did not show much difference among sites, and it was relatively higher in spring and fall season $(10\sim20{\mu}gChl\;{\alpha}cm^{-2})$ and lower in August $(<5{\mu}gChl\;{\alpha}cm^{-2})$, possibly because biofilms were washed off during spates of summer monsoon. Cyanobacteria was the dominant taxon in the periphyton community throughout the year. The periphyton standing crop can be classified as a nuisance level. It seems that phosphorus level is sufficiently high even though the input water is treated chemically, and modest water velocity $(20\sim90cm\;sec^{-1})$ and rocky bottom provide optimal conditions for periphyton growth.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.102-111
• /
• 2024

Roadbed stability is paramount in urban areas as it directly affects public safety and city operations. South Korea's major metropolis has experienced 1127 cases of ground subsidence since 2014, affecting subways, roads, railways, and construction sites. Notably, about 40% of these incidents coincide with heavy summer rainfall, while 60% resulted from utility damage, improper backfill, and groundwater fluctuations. Subsequently, roadbed instability leads to a range of cascading hazards, including sinkholes and road failures, endangering public safety and the economy. Therefore, continuous monitoring of roadbed stability and implementing proactive measures are essential for a resilient transportation infrastructure. However, terrestrial in-situ observations like GPS provide accurate surface's displacement with high temporal accuracy but limited spatial resolution. To address this issue, we used the InSAR permanent scatterer (PSInSAR) technique to process 35 Sentinel-1 SLC datasets acquired between 2017 and 2022 to monitor and prevent cascading hazards in Daejeon City, South Korea. The results revealed an average subsidence rate of -0.88mm/year with a maximum of -7.73 mm/year. Notably, the southern part of the city exhibited significant roadbed instability, with an average and maximum cumulative subsidence of -5.13 mm and -44.95 mm, respectively. The deformation data was then integrated with road geometry to develop a vulnerability map of the city, highlighting the pronounced roadbed deformation in the southern region. Time-series subsidence variations correlated with groundwater fluctuations data from 2017 to 2022, showing a decline in groundwater levels from 4.63m to 9.9m in the southern region. Furthermore, a comparison between subsidence rates and effective shear wave velocity (V_s³⁰) revealed that most subsidence events were associated with V_s³⁰ values below 420 m/sec, indicating a clear lithological influence on the spatial distribution of roadbed instability. Thus, the integrated geotechnical and hydrogeological data with PSInSAR monitoring can better understand the processes responsible for roadbed instability in areas with small-scale variations.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.128-137
• /
• 2013

Due to the global warming and air pollution, interest in renewable energies has increased in recent years. In particular, the crisis of the depletion of fossil energy resources in the near future has accelerated the renewable energy technologies. Among the renewable energy resources, oceans covering almost three-fourths of earth's surface have an enormous amount of energy. For this reason, various approaches have been made to harness the tremendous energy potential. In order to achieve two purposes: to improve harbor water quality and to use wave energy, this study proposed a sea water exchange structure applying an Oscillating Water Column (OWC) wave generation system that utilizes the air flow velocity induced by the vertical motion of water column in the air chamber as a driving force of turbine. In particular, the airflow velocity in the air chamber was estimated from the time variations of water surface profile computed by using 3D-NIT model based on the 3-dimensional irregular numerical wave tank. The relationship of the frequency spectrums between the computed airflow velocities and the incident waves was analyzed. This study also discussed the characteristics of frequency spectrums in the air chamber according to the presence of the structure, wave deformations by the structure, and the power of the water and air flows were also investigated. It is found that the phase difference exists in the time series data of water level fluctuations and air flow in the air chamber and the air flow power is superior to the fluid flow power.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.623-631
• /
• 2005

We applied the seismic method to investigate the site characteristics around the Circular Pond (top diameter 7.3 m, bottom diameter 3 m, and depth 4.78 m) at the Ssangsujung Park within the Gongsansung in Gongju. Previous excavations for the cultural assets beneath the Ssangsujung Park disclosed the assumed site of the Palace of the Beakje Dynasty and the Circular Pond containing the Bakje relics. We demonstrated that the seismic prospecting can be applicable to delineate the underground structure around the cultural properties by the three kinds of seismic approaches: walk-away test, conventional refraction method, and equal-distance refraction survey. The last method which is designed by this work ran detect the I-W variations of seismic velocity in the subsurface medium across the Circular Pond on the basis of the difference of the P-wave arrival times between the 1-m-spacing 24 geophones and the corresponding 24 shots parallel with the geophone profile. From the combined results, prominent three-layer velocity structure is observed around the Circular Pond. The bottom layer is interpreted as the basement rock which is exposed near the Ssangsujung whereas the upper layer with relatively lower velocities is interpreted to be the artificial covering. The basement depth beneath the Circular Pond is deeper than the norhern area. The western basement of Circular Pond has the thicker weaker layer compared with the eastern part. Thus, the middle layer could be constructed as the artificial foundation during the Beakje Dynasty. Consequently, the Kong-sansung Circular Pond is possibly built upwardly rather than digging.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.80-85
• /
• 2008

Catalytic filter is capable of performing shallow bed dust filtration plus a catalytic reaction, promoted by a catalyst deposited in its inner structure. Such a feature may allow potential cost and space reduction in several environmental applications. Dust filtration and halogenated volatile organic compound (1,2-dichlorobenzene) destruction were carried out in a lab-scale reactor. $WO_3-V_2O_5/TiO_2$ supplied by MaGreen, which showed high catalytic acitivity at low temperature, was used as a catalyst. P-84 that can be operated under $250^{\circ}C$ was used as a felt. The catalytic activity and filtration efficiency of catalytic filters were investigated under the operating conditions, including temperature, face velocity, and dust concentration. The catalytic activity of catalytic filter increased with increasing temperature and the amount of catalyst loaded. The test results showed that the filtration efficiency was primarily affected by the face velocity. Pressure drop variations as a function of time were investigated for a variety of conditions. In case of virgin filter, a dramatic decrease in the pulse interval and a slightly increase in the base line pressure drop were observed. A relatively slow pressure drop build-up was recorded for the catalytic filter due to smooth and slippery surface characteristics of nanofiber. The catalytic filter indicated that high filtration efficiency over 99.98% and high catalytic activity over 90% at 1 m/min and $210^{\circ}C$.