• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.89-90
• /
• 2002

Ball reducer (HERB Drive: High Efficient Wave Rolling Ball Drive) with waved grooves has many advantages over other types of reducers for high-reduction ratio, low noise and low energy loss, etc. The mechanism of force transmission is very similar to that of cam and follower in automobile valve train system especially in contact behaviors. In this study, we have investigated the traces of contact between ball and outer ring, and the dynamic contact behaviors of elastohydodynamic lubrication(EHL) with a certain reduction ratio. In order to verify the contact behaviors between ball and outer ring for the critical endurance lift, the contact velocity and load are computed for a cycle. During some intervals of a cycle, the contact velocity reverses its direction very suddenly. It is expected that changing the contact direction causes undesirable endurance performance because EHL film frequently col lapse at the moment of velocity reversal. From the computational investigation in this work, we hope to predict similar contact damages in other machinery due to this kind of contact behaviors, which is very typical in many contact phenomena.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.90-98
• /
• 2005

HMT is a type of continuously variable transmission which has split power flow path characteristics with gear train and hydro static unit. The benefit of improved fuel economy and high power capacity enables it to be a promising application fur large vehicles. This paper presents the analysis results including velocity, static torque, transmission efficiency and dynamic model of the HMT that is developed for city buses. The speeds or gear shafts, the static clutch torque and split power ratio for each mode are detailed here. From the analysis of HMT transmission efficiency considering the power loss in meshed gear and hydraulic unit, we can conclude that minimization of hydraulic power is necessary for improved fuel economy design. Also, the dynamic simulation result for mode shift characteristics shows that little shift shock is observed because of the synchronized rotation speed in clutch.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.594-602
• /
• 1990

본 연구에서는 동력전달용 인벌류우트 원통치차(스퍼어 및 헬리컬 기어)의 강 도 및 각종 영향인자를 충분히 고려하면서 크기를 최소로 하는 치차장치의 설계법을 개발하고, 이 설계법을 기본으로 하여 퍼스널 컴퓨터 상에서 누구나 손쉽게 설계에 이 용할 수 있는 설계 시스템을 개발하여 그 평가를 수행한다.

• Fisheries and Aquatic Sciences
• /
• 제11권2호
• /
• pp.103-112
• /
• 2008

Compressional sound velocities of shelf sediments in the South Sea of Korea, were measured in situ and in the laboratory for six cores. In situ sound velocity was measured using the Acoustic Lance (frequency of 7.5-15 kHz), while laboratory velocity was measured by the pulse transmission technique (frequency of 1MHz). Physical properties were relatively uniform with sediment depth, suggesting little effect of sediment compaction and/or consolidation. Average in situ velocity at each core site ranged from 1,457 to 1,488 m/s, which was less than the laboratory velocity of 1,503 and 1,604m/s. In muddy sediments the laboratory velocity was 39-47 m/s higher than in situ velocity. In sandy sediments, the difference was greater by an average of 116 m/s. Although the velocity data were corrected by the velocity ratio method based on bottom water temperature, the laboratory velocity was still higher than the in situ velocity (11-21 m/s in muddy sediments and 91 m/s in sandy sediments). This discrepancy may be caused by sediment disturbance during core collection and/or by the pressure of Acoustic Lance insertion, but it was most likely due to the frequency difference between in situ and laboratory measurement systems. Thus, when correcting laboratory velocity to in situ velocity, it is important to consider both temperature and frequency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.77-80
• /
• 1998

Recently, extending the local broadcasting and increasing lots of informations. The low-loss communication cable is required in proportion as frequency .The reason of transportation loss causes to using the high frequencies like hundreds of MHz or decades of GHz. For the low transportation loss. It is required the developing-technology of foaming and the high foamed insulator with the dielectric ratio of the nearest to 1. Therefor, there is the purpose of developing the insulating materials for the low dielectric ratio. Also it is important to measure the attenuation, which is one of the important parameters.sa the evaluation of transportation characteristic with frequency in the communication cable. In this paper,the result showed that the dielectric ratio(1.4) of the nearest to 1 and low attenuation with high frequency were very related to the transportation and reflection characteristics such as propagation velocity (82.27%). Delay time and voltage standing wave ratio(VSWR).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.726-729
• /
• 1996

A weighted impact ellipsoid normalized by maximum allowable angular velocity changes is defined and compared with conventional impact ellipsoids and impact polytopes. The results shows that the conventional impact ellipsoid may give false solution as far as the optimal direction of motion is concerned.

• 한국터널지하공간학회 논문집
• /
• 제9권1호
• /
• pp.75-82
• /
• 2007

본 연구의 목적은 록볼트의 건전도를 평가하기 위하여 록볼트의 비파괴시험을 기술하고 비파괴시험의 적용성을 조사하는 것이다. 록볼트 자체와 그라우팅재를 포함한 록볼트의 건전도를 평가하기 위하여, 수치해석 및 실험적 방법을 이용한 두 가지 방법이 적용되었다. 수치해석적 방법에서는 "DISPERSE" 프로그램을 이용하여 록볼트 시스템에서 유도파 전달시의 분산성분석을 수행하였다. 분산선도 곡선은 지중근입되어 있는 록볼트에 대하여 주변암반과 그라우팅재의 강성에 따라 신호파의 진폭감쇠정도와 주파수변화대비 전파속도의 영향을 보여준다. 이로 부터 록볼트의 건전도시험을 위한 최적의 주파수를 추정할 수 있으며, 그 결과L(1)모드에서$20{\sim}70kHz$가 최적의 주파수대역으로 선정하였다. 실험적 방법에서는 시험체를 제작한 후 현장조건을 모사하여 실내비파괴시험을 실시하였다. 비파괴 실험기법으로는 록볼트 선단부에 가진 센서를 부착, 매입하여 전기신호 가진에 의한 투과법을 적용하였다. 그라우팅과 주변암반에 의해 신호파의 전파속도와 진폭에 영향이 있으며, 그라우팅과 주변암반으로의 leaking 등에 의하여 신호파의 진폭이 감쇠하는 것으로 나타났다. 또한 시험체가 그라우팅으로 피복되어 있을 경우 자유구속 및 지중근입 조건에서 공동결함 크기가 증가함에 따라 무결함부에 비하여 진폭이 증가하였다. 그리고 수진된 신호파의 초동시간이 감소하여 전파속도는 전반적으로 선형적 증가 경향을 보였으며, 진폭변화에 비하여 전파속도가 공동결함비율 변화에 더 민감한 반응을 보였다. 본 연구는 록볼트의 건전도 평가시에 비파괴시험이 매우 유용한 방법임을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.131-138
• /
• 2001

In this paper, performance of a dry CVT vehicle with torque cam is investigated. Based on belt transmission mechanism and torque cam actuator characteristics, an algorithm which is able to calculate the speed ratio from given thrust and load torque is suggested and a 3-D map is constructed for the speed ratio-thrust-torque. Using the 3-D map, a steady state characteristic of torque cam and a transient response of a dry CVT vehicle are investigated by simulation. It is found that initial spring compression plays a key role in determining the sliding criteria and the speed ratio velocity.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3620-3629
• /
• 1996

In the free molecular flow range, the pumping performance of a turbomolecular pump has been predicted by calculation of the transmission probability which employs the integral method and the test particle Monte-Carlo method. Also, new approximate method combining the double stage solutions, so called double-approximation, is presented here. The calculated values of transmission probability for the single stage agree quantitatively with the previous known numerical results. For a six-stage pump, the Monte-Carlo method is employed to calculate the overall transmission probability for the entire set of blade rows. When the results of the approximate method combining the single stage solutions are compared with those of the Monte-Carlo method at dimensionless blade velocity ratio C=0.4, the previous known approximate method overestimates as much as 34% than does the Monte-Carlo method. But, the new approximate method gives more accurate results, whose relative error is 10% compared to the Monte-Carlo method, than does the previous approximate method.

• 한국해안해양공학회지
• /
• 제15권2호
• /
• pp.116-126
• /
• 2003

본 논문은 사석이나 소파블록 투과방파제로 이루어진 항만의 평면파랑장 해석모델에 있어서 중요한 변수인 구조물 내부의 투과파 속도와 저항계수를 수치모델에 사용하기 편리하도록 정의하고, 시간의존 완경사방정식 모델에 이들 방법과 임의투과율 경계조건을 사용하여 투과 사석방파제 주변의 평면파랑장을 해석할 수 있는 모델을 제시하였다. 모델의 검증은 조파수로 내에서 투과제에 대한 단면 수리모형실험을 실시하여 구조물 전$.$후 면의 수위변동을 측정하고 모델의 결과와 시계열로 비교하였으며, 현지 항만의 소파블록 투과제에 대한 3차원 수리모형실험 결과와 모델의 결과를 항내 구역파고비로 비교하여 이루어졌다. 본 모델은 검증을 통하여 수리모형의 실험결과에 대한 재현성이 매우 좋음을 확인할 수 있었다.