• 한국수자원학회논문집
• /
• 제42권10호
• /
• pp.867-876
• /
• 2009

본 연구에서는 하상이 경년별로 변화함에 따라 발생되는 수위-유량 관계곡선의 오차를 보완하기 위해 최근(2006 년)의 수위-유량 관계곡선을 기준으로 채택하여 일원화시키고, 과거의 하상상태와 경년별로 작성되어 왔던 수위-유량 관계곡선들과의 관계 및 수위, 단면적, 유속 등에 대한 수리기하학적 특성을 분석하였다. 연구 대상지점으로는 낙동강의 주요지점인 적포교와 진동 지점을 택하였으며, 과거의 실측 유량값을 최근(2006년)하에서의 유량으로 환산하였을 때 얻어지는 수위(환산수위)와 과거수위와의 관계 및 환산유속과 과거유속간의 관계 그리고 수위-통수단면적 관계, 수위-유속 관계 등의 상관식을 도출하여 기왕의 많은 자료들을 활용할 수 있도록 상관해석을 실시하였다.

• 천문학회보
• /
• 제37권1호
• /
• pp.46.2-46.2
• /
• 2012

The black hole mass-stellar velocity dispersion ($M_{BH}-{\sigma}_*$) relation observed in the present-day universe has motivated numerous studies on the black hole-galaxy co-evolution. It is crucial to define the$M_{BH}-{\sigma}_*$ local active galaxies since cosmic evolution of the correlations is calibrated based on the local relation. However, stellar velocity dispersion is difficult to measure in active galaxies due to much higher AGN continuum than stellar pseudo-continuum, resulting in a small sample with reliable velocity dispersion measurements for studying the AGN $M_{BH}-{\sigma}_*$ relation. To increase the sample size and improve the measurements, we obtained high S/N near-IR spectra for 3 local AGNs, i.e., NGC 3227, Akn 120, 3C 390.3, for which reverberation black hole masses are measured, using the TripleSpec at the Palomar 5-m Telescope. By investigating aperture effect and correcting for rotation component, we determine the luminosity-weighted ${\sigma}_*$, based on the spatially resolved kinematics and compare them with optical measurements from literature. Combining our new measurements with literature data, we present an improved $M_{BH}-{\sigma}_*$ relation for the enlarged sample of reverberation-mapped AGNs.

• 한국전문물리치료학회지
• /
• 제13권2호
• /
• pp.70-76
• /
• 2006

The purpose of this study was to investigate the effects of hip extension velocity (7.5 degree/second, 30 degree/second) on the relative onset time of the gluteus maximus in relation to the hamstring during hip extension in prone position. Thirteen healthy male subjects (mean age=22.6 years [SD=1.8], mean weight=73.4 kg [SD=10.3], mean height=176.1 cm [SD=6.3]) voluntarily participated in this study. Electromyographic data was collected on the gluteus maximus and hamstring to determine onset time. Statistical analyses were performed with the paired t-test. The results showed that the onset time of the hamstring was significantly faster than that of the gluteus maximus in both fast and slow hip extension velocity. The gluteus maximus began contraction .079 seconds later following the contraction of the hamstring. The onset time of the hamstring was significantly faster in fast hip extension velocity compared with slow hip extension velocity. In conclusion, it was determined that the onset time of the gluteus maximus was faster with fast hip extension velocity compared with slow hip extension velocity. There was a statistically significant difference between the onset times of the gluteus maximus and hamstring in relation to the two velocities (p<.05). Further study is needed to examine whether the velocity of hip extension can influence the onset time in a similar fashion in patients with low back pain.

• 터널과지하공간
• /
• 제20권2호
• /
• pp.97-104
• /
• 2010

가속 크리프 거동을 보이는 재료의 파괴를 설명하기 위하여 재료 파괴식($\ddot{\Omega}=A{(\dot{\Omega})}^\alpha$, $\Omega$는 변위와 같은 측정가능한 양을 나타낸다)이 사용된다. 상수 A와 $\alpha$는 주어진 측정 자료를 곡선적합하여 얻는다. 본 연구에서는 재료 파괴식을 이용하여 터널의 파괴시간을 예측하였고, 재료 파괴식을 적용하기 위하여 4가지 곡선적합기법이 사용되었다. 4가지 곡선적합기법 중 로그속도-로그가속도기법, 로그시간-로그속도기법, 역속도법은 선형최소자승법을 이용하고 비선형최소자승기법은 Levenberg-Marquardt 알고리즘을 이용한다. 로그속도-로그가속도기법은 재료 파괴식을 대수형태로 만들어 해석을 하기 때문에 터널의 파괴시간 예측에 재료 파괴식을 적용하는 것이 타당한지에 대한 근거를 제시한다. 로그속도-로그가속도기법에 따른 자료의 상관계수가 0.84로 비교적 높게 나타났기 때문에 재료 파괴식을 터널의 파괴시간 예측에 적용하는 것이 타당하다고 판단된다. 실제 파괴시간과 4가지 곡선적합기법으로부터 얻은 예측 파괴시간을 비교한 결과 로그시간-로그속도기법이 가장 우수한 결과를 보여주는 것으로 나타났다.

• 화약ㆍ발파
• /
• 제27권1호
• /
• pp.79-87
• /
• 2009

발파진동속도(PVS, PPV, $V_V$)와 진동레벨과의 관계식을 산출하기 위해서 동일한 위치에서 동시에 측정한 진동속도와 진동레벨의 자료를 회귀분석 하였다. 회귀분석결과 발파진동속도와 진동레벨과의 상관관계는 좋았다. 이 연구결과 진동레벨과 진동속도와의 관계식들은 환경진동의 평가 및 관리에 유용하게 적용할 수 있을 것으로 판단된다.

• 대한한방내과학회지
• /
• 제28권4호
• /
• pp.709-716
• /
• 2007

Objective : We present reference values of flow velocities of intracranial and extracranial cerebral arteries and relation with change factor. Method : We checked transcranial Doppler ultrasonography on mean velocity, systolic velocity, pulsatility index, and resistance index of 252 patients. We also compared differences of change factor. Result : The result showed a difference by sex and age and relevance between vessels besides mean velocity of vessels related with past history and social history. Conclusion : According to the above results, females showed higher velocity of all vessels. With advancing age, subjects showed reduction in velocity and increase in pulsatility index and resistance index. Anterior cerebral, middle cerebral, and posterior cerebral artery increased in proportion to velocity of internal carotid artery and basilar artery. Vessel velocity correlated with diabetes mellitus, hypertension and hyperlipidemia.

• 천문학회보
• /
• 제37권1호
• /
• pp.35.1-35.1
• /
• 2012

Determining the virial factor of the broad-line region (BLR) gas is crucial in calibrating AGN black hole mass estimators, since the measured line-of-sight velocity needs to be converted into the representative velocity of the BLR gas. The unknown virial factor has been empirically calibrated based on the $M_{BH}-{\sigma}_*$ relation of non-AGN galaxies, but the claimed values are different by a factor of 2 in recent studies. We investigate the origin of the difference by measuring the $M_{BH}-{\sigma}_*$ relation using the most updated nearby galaxy sample, and explore the dependence of the virial factor on the various fitting methods. We find that the discrepancy is mostly caused by the sample bias while the difference stemming from various regression methods is marginal. Based on the best-determined virial factor, we present the updated $M_{BH}-{\sigma}_*$ relation of local active galaxies.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.135-152
• /
• 2009

Liquid molding processes, such as resin transfer molding, involve resin flow through a porous medium inside a mold cavity. Numerical analysis of resin flow and mold filling is a very useful means for optimization of the manufacturing process. However, the numerical analysis is quite time consuming and requires a great deal of effort, since a separate numerical calculation is needed for every set of material properties, part size and injection conditions. The efforts can be appreciably reduced if similarity solutions are used instead of repeated numerical calculations. In this study, the similarity relations for pressure, resin velocity and flow front propagation are proposed to correlate another desired case from the already obtained numerical result. In other words, the model gives a correlation of flow induced variables between two different cases. The model was verified by comparing results obtained by the similarity relation and by independent numerical simulation.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.815-821
• /
• 2012

CW 도플러 레이더는 움직이는 물체의 속도에 비례하는 도플러 주파수 편이를 검출함으로써 속도를 계측한다. 도플러 주파수 편이를 검출하기 위해서 시간영역에서 획득한 수신 신호를 주파수 영역으로 변환하기 위한 FFT(Fast Fourier Transform)를 수행한다. 이때 FFT 개수에 의해 도플러 레이더의 시각 분해능이 달라진다. 또한, FFT 개수는 수신 신호의 신호 대 잡음비에도 영향을 미치므로, 결국 시선 속도의 정확도와도 관련 있다. 따라서 본 논문에서는 FFT 개수에 따라 달라지는 시각 분해능과 시선 속도 정확도의 관계를 제시하였다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.14-23
• /
• 1999

This paper proposes a method to generate the velocity trajectory which guarantees user specified contour errors at corners for high speed and high precision motion control of CNC machines. The relation among the desired trajectory, system bandwidth and corner contour error are derived. Experiments show that the corner contour error specified by users can be guaranteed with the proposed velocity trajectory.