• 제어로봇시스템학회논문지
• /
• 제19권6호
• /
• pp.540-546
• /
• 2013

This paper presents a trajectory planning algorithm for TMR (Two-wheeled Mobile Robots). The trajectory is developed in joint space and considers the physical limits of a TMR. First, we present a process for generating a smooth curve through a Bezier curve. The trajectory for the center of the TMR following the Bezier curve is developed through a convolution operator taking into consideration its physical limits. The trajectory along the Bezier curve is regenerated using time-dependent parameters which correspond to the distance driven by the velocity of the center of the TMR in a sampling time. The velocity commands in the Cartesian space are converted to actuator commands for two wheels. In case that the actuator commands exceed the maximum velocity, the trajectory is redeveloped with compensated center velocity. We also suggest a smooth trajectory planning algorithm in joint space for the two segmented paths. Finally, the effectiveness of the algorithm is shown through numerical examples and application to a simulator.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.121-128
• /
• 2000

In this paper, the control algorithm fur an autonomous vehicle is studied and applied to an actual 2 wheel-driven vehicle system. In order to control a nonholonomic system, the kinematic model for an autonomous vehicle is constructed by relative velocity relationship about the virtual point at distance from the vehicle's frame. And the optimal controller that based on the kinematic model is operated on purpose to track a reference vehicle's path. The actual system is designed with named 'HYAVI' and the system controller is applied. Because all the results of simulation don't satisfy the driving conditions of HYAVI, a reformed control algorithm that satisfies an actual autonomous vehicle is applied at HYAVI. At the results of actual experiments, the path tracking works very well by the reformed control algorithm. An autonomous vehicle that applied this control algorithm can be easily used for a path generation algorithm.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.143-152
• /
• 1994

The velocity trajectory profile of trolley is designed to minimize both swinging while transportation of load and the stop position error at the final stop position. This profile is designed to be automatically programmed by the digital control algorithm when the length of chain and the desired travel distance are given as a priori. Also, to minimize both swinging and the stop position error the anti-swing controller which improves poor damping characteristics of the crane and the stop position controller are employed. The experimentalresults of sequential adaptation of the velocity trajectory profile and these two controllers show that this control scheme has excellent control performance as compared with that of the uncontrolled crane system.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.997-1002
• /
• 2008

This paper is mainly concerned with the development of a remotely operated vehicle for investigation of the coastal sea. For this, we have designed and constructed a vehicle entitled KMU-ROV(Korea Maritime University Remotely Operated Vehicle), for purpose of investigation mission under 50(m) of the sea surface. We have designed six independent waterproof actuators and the housing of the controller for underwater operation. For six degree-of-freedom motion, we have analyzed the dynamics of the KMU-ROV and have designed a new composition of six actuators including the driving system. For motion control, we have composed a concurrent velocity control algorithm for controlling the speed of all the actuating motors. The control system for the KMU-ROV is composed of a master DSP controller, DSP controller for the motor control and various sensors. We composed the PID control algorithm and a network system for controlling motors using the CAN communication. The performance of the KMU-ROV was presented by testing the developed control algorithm and control system under the water.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권8호
• /
• pp.353-362
• /
• 2006

This paper illustrates the practical design procedure on a position control of an electrical fin actuator for the guided missile using Time Delay Control(TDC) and Enhanced Time Delay Observer(ETDO). Since TDC is robust to the model uncertainties such as the parameter variation and the external disturbance, it has been frequently used in nonlinear control systems. For a position control of an electrical fin actuator in the missile system, TDC requires the velocity sensor as well as the position sensor. To resolve the problems of the cost, the space and the malfunction due to the velocity sensor, ETDO is used as the velocity observer. ETDO is enhanced version of TDO that has the problems of the reconstruction errors and the restriction on selecting its gains. To maximize the control performance, the parameters of ETDO are optimized by using the genetic algorithm. The effectiveness of this approach is proved through a series of simulation studies and experiments, and the designed controller is compared with the typical TDC and TDC using the reduced oder observer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.559-562
• /
• 1995

In the crane control system, it is reguired that the travelling time of the crane must be reduced as much as possible and the swing must be stoped at the end point. In paper, we present a hybrid control method which include the optimal regulator and velocity pattern controller in order to make high performance of the anti-sway. To implement the control algorithm, the dynamic equation is linearlized at an equilibrium point, so that the liner time invariant state equation can be obtained. In order to experiment the crane control, we consider 1 over 10 of the gantry crane which is used in a port. As a result, the hybrid control method improve efficient anti-sway control more than conventional velocity pattern control. It is expected that the proposed system will make an important contribution to the industrial fields.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.106.5-106
• /
• 2002

1. Introduction 2. Artificial Immune Networks and Navigation Algorithm 3. Obstacle Avoidance and Goal Approach Behavior 4. Weights Adjustment Using Neural Network 5. Velocity Control and Local Minimum Avoidance 6. Simulation 7. Conclusion

• 전자공학회논문지S
• /
• 제34S권1호
• /
• pp.54-64
• /
• 1997

In this paper, a method of dynamic modeling and a dynamic control of a mobile robot are presented to show the superiority of the dynamic control comparing to the PD control. This dynamic model is derived from the cartesian coordinates using lagrange equations. Based upon the derived dynamic model, we implemented the dynamic control of the mobile robot using the computed torque method. Time varying non-linear friction terms are not incroporated in this dynamic model. Instead, those are considered as disturbances. This uncertainty in dynamic model of mobile robot is compensated by the outer loop controller using PD algorithm. The validity of this model and the control algorithm are confirmed through the experiments, where the dynamic control algorithm demonstrated robust velocity tracking performance against the unmodeled non-linear frictions. The superiority of this algorithm is demonstrated by comparing to classical PD control algorithm.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.70-75
• /
• 2010

The objective of this paper is to propose a new velocity measurement method for an electro-mechanical fin actuator. The model of the electro-mechanical fin actuator includes uncertainties such as unknown disturbances and parameter variations in flight condition. So, an electro-mechanical fin actuator system needs robust control algorithm which requires not only position information but also velocity information. Usually, analog tachometers have been used for velocity feedback in an electro-mechanical fin actuator. However, using these types of sensors have problems such as the cost, space, and malfunction. These problems lead to propose a new velocity measurement method using linear type Hall-effect sensor. In order to verify the proposed method, several experiments are performed using Model Following Sliding Mode Controller(MFSMC). It is shown that the MFSMC with a new velocity measurement method using linear type Hall-effect sensor can satisfy the requirements without using of velocity sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.89-94
• /
• 1994

This paper presents an impact control algorithm for reducing the potentially damaging effects by interation of redundant manipulators with their environments. In the. proposed control algorithm, the redundancy is resolved at the torque level by locally minimizing joint torque, subject to tire operational space dynamic formulation which maps tire joint torque set into the operational forces. For a given pre-impact velocity of the manipulator, the proposed approach is on generating joint space trajectories throughout the motion near the contact which instantaneously minimize the impulsive force which is a scalar function of manipulator's configurations. This is done by using the null space dynamics which does not affect the motion of an end-effector. The comparative evaluation of the proposed algorithm with a local torque optimization algorithm without reducing impact is performed by computer simulation. The simulation results illustrate the effectiveness of the algorithm in reducing both the effects of impact and large torque requirements.