• 전력전자학회논문지
• /
• 제23권3호
• /
• pp.161-167
• /
• 2018

In battery-operated systems, an isolated converter is used to interface the utility grid with the system to increase stability when charging and discharging batteries. Systems such as vehicle-to-grids (V2Gs), on-board chargers, and energy storage systems (ESSs) have recently become popular, and the roles of isolated converters have become important considerations in fabricating such devices. A fixed-frequency LLC converter, which is a type of isolated converter, presents the advantages of high efficiency and high power density by performing zero-voltage switching (ZVS) over wide frequency ranges. However, the magnetizing inductance of the LLC converter should be designed to enable ZVS in all switching devices. Therefore, in this study, the operating characteristics of the LLC circuit are analyzed, and an optimal design method for ZVS operation is established. Moreover, an 8 kW LLC high-efficiency and high-power-density resonant converter is designed and tested for ESS application. The LLC converter achieves 98% efficiency at rated power.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.635-642
• /
• 2003

최근들어 노후화된 교량의 증가에 따라 바닥판의 보강효과에 대한 많은 연구가 이루어지고 있으나 대부분의 연구는 실험실 수준에 국한되어 있으며, 구조물의 피로거동은 이동하중이 아닌 고정반복하중에 의한 연구가 집중적으로 시행되고 있다. 본 연구에서는 이동하중의 영향을 반영하기 위하여 국내에서 실측된 축하중으로 활하중 모델을 제시하였다. 확률론적 해석과 신뢰성 해석을 적용하여 탄소섬유쉬트와 격자형 탄소섬유로 성능향상된 바닥판의 보강효과 및 연장수명을 예측한 결과 성능향상 된 설계 2등급의 교량바닥판은 일반적인 증가 차량하중에 대하여 사용기간동안 충분한 내하력뿐만 아니라 충분한 피로거항성을 갖는 것으로 나타났다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권1호
• /
• pp.43-56
• /
• 2011

An integrated system composed of guidance, navigation and control (GNC) system for autonomous proximity operations and the docking of two spacecraft was developed. The position maneuvers were determined through the integration of the state-dependent Riccati equation formulated from nonlinear relative motion dynamics and relative navigation using rendezvous laser vision (Lidar) and a vision sensor system. In the vision sensor system, a switch between sensors was made along the approach phase in order to provide continuously effective navigation. As an extension of the rendezvous laser vision system, an automated terminal guidance scheme based on the Clohessy-Wiltshire state transition matrix was used to formulate a "V-bar hopping approach" reference trajectory. A proximity operations strategy was then adapted from the approach strategy used with the automated transfer vehicle. The attitude maneuvers, determined from a linear quadratic Gaussian-type control including quaternion based attitude estimation using star trackers or a vision sensor system, provided precise attitude control and robustness under uncertainties in the moments of inertia and external disturbances. These functions were then integrated into an autonomous GNC system that can perform proximity operations and meet all conditions for successful docking. A six-degree of freedom simulation was used to demonstrate the effectiveness of the integrated system.

• Earthquakes and Structures
• /
• 제11권5호
• /
• pp.841-859
• /
• 2016

Bridge bearings are important connection elements between bridge superstructures and substructures, whose health states directly affect the performance of the bridges. This paper systematacially presents a new method to identify the bridge bearing damage based on the neural network theory. Firstly, based on the analysis of different damage types, a description of the bearing damage is introduced, and a uniform description for all the damage types is given. Then, the feasibility and sensitivity of identifying the bearing damage with bridge vibration modes are investigated. After that, a Radial Basis Function Neural Network (RBFNN) is built, whose input and output are the beam modal information and the damage information, respectively. Finally, trained by plenty of data samples formed by the numerical method, the network is employed to identify the bearing damage. Results show that the bridge bearing damage can be clearly reflected by the modal information of the bridge beam, which validates the effectiveness of the proposed method.

• Smart Structures and Systems
• /
• 제33권2호
• /
• pp.105-118
• /
• 2024

In order to realize tiny bridge crack discovery by UAV-based machine vision, a novel method combining deep learning and tensor voting is proposed. Firstly, the grid images of crack are detected and descripted based on SE-ResNet50 to generate feature points. Then, the probability significance map of crack image is calculated by tensor voting with feature points, which can define the direction and region of crack. Further, the crack detection anchor box is formed by non-maximum suppression from the probability significance map, which can improve the robustness of tiny crack detection. Finally, a case study is carried out to demonstrate the effectiveness of the proposed method in the Xiangjiang-River bridge inspection. Compared with the original tensor voting algorithm, the proposed method has higher accuracy in the situation of only 1-2 pixels width crack and the existence of edge blur, crack discontinuity, which is suitable for UAV-based bridge crack discovery.

• 대한교통학회지
• /
• 제22권5호
• /
• pp.123-137
• /
• 2004

시간에 따라 변화하는 네트워크 상황을 반영하는 통행배분 연구가 활발히 진행되고 있다. 이러한 연구의 배경에는 통행배분 모델이 도로망 계획이라고 하는 하드웨어 분야의 계획에만 그치지 않고 교통관리나 제어라고 하는 소프트웨어 분야의 계획에도 활용하고자 하는 사회적 필요성의 증가 때문이다. 또한, 통행배분 모형의 이론과 현실 사이의 괴리를 줄이고자 하는 차원에서 연구되고 있는 모형으로 다중계층 통행배분 모형이 있다. 이 모형은 다중 운전자 계층과 다차종 계층으로 구분되며 이중에서 동적모형과 결합될 수 있는 보다 현실성 있는 분야는 다차종 분야이다. 이러한 배경에서 본 연구의 목적은 이 두 분야를 결합한 다차종 동적 통행배분 모형을 구축하고자 한다. 이것은 동적 이용자 균형 배분 모형이 현재 이슈화 되고 있는 첨단교통체계(ITS)의 이론적 지주가 되고 있으며 따라서 이러한 동적모형을 다중계층 모형과 결합시킴으로써 보다 현실성 있는 동적 모형이 구축될 수 있을 것으로 기대되기 때문이다. 그렇지만 다수의 차종을 고려하게 되는 경우 기존의 동적 배분 모형의 구축을 위하여 필요한 FIFO가 위반된다. 이것은 FIFO 제약 조건하에 구축되는 기존의 동적 배분 모델링 방법으로는 다차종 동적모형의 구축이 불가능함을 의미한다. 따라서 본 연구에서는 FIFO 제약조건을 완화 시킬 수 있는 동적 네트워크의 모형을 구축하였으며 동시에 기존의 네트워크 부화 기법의 하나인 시뮬래이션 기법을 수정하여 본 연구의 모형에 적용될 수 있도록 고안하였다. 또한 해법(알고리즘) 분야오 기존의 최단경로 산정 알고리즘을 수정한 시간종속적인 최단경로 알고리즘과, 기존의 MSA를 수정한 알고리즘도 구축하였다. 이렇게 구축된 모형과 알고리즘을 격자형 격자형 네트워크에 적용하여 동적이용자 균형해를 산정하여 구축된 알고리즘의 수렴성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.335-336
• /
• 2016

This paper introduces a bidirectional full-bridge converter with new active damp structure. The proposed active damp circuit can damp the oscillating voltage across the rectifier diodes with a smaller voltage stress of the damping capacitor and eliminate the circulating current. In addition, the proposed converter can achieve additional advantages such as nearly ZCS switching for leading-leg switches and no recovery current for rectifier-bridge by the suitable design of the damp capacitor to resonate with leakage inductor. Since the ZVS is achieved for both leading-leg and lagging-leg switches by the magnetizing current of the transformer, it can be achieved regardless of the load variation. A 3.3 kW prototype converter is implemented for vehicle-to-grid (V2G) application and the advantages of the proposed converter are verified by the experiments. The maximum efficiencies of 98.2% and 97.6% have been achieved for the buck mode and boost mode operation, respectively.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.12-19
• /
• 2007

In this study, nonlinear flow-induced vibration(flutter) analyses of a 2-DOF launch vehicle airfoil have been conducted in supersonic and hypersonic flow regimes. Advanced aeroelastic analysis system based on computational fluid dynamics and computational structural dynamics is successfully developed and applied to the present analyses. Nonlinear unsteady aerodynamic analyses considering strong shock wave motions are conducted using inviscid Euler equations. Aeroelastic governing equations for the 2-DOF airfoil system is solved by the coupled integration method with interactive CFD and CSD computation procedures. Typical wedge type airfoil shapes with initial angle-of-attacks are considered to investigate the nonlinear flutter characteristics in supersonic(15). Also, the comparison of detailed aeroelastic responses are practically presented as numerical results.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.53-59
• /
• 2011

In this study, steady and unsteady aerodynamic analyses of a huge rocket configuration have been conducted in a transonic flow region. The launch vehicle structural response are coupled with the transonic flow state transitions at the nose of the payload fairing. Before performing the coupled fluid-structure transonic aeroealstic simulations transonic aerodynamic characteristics are investigated for the pitching motions of the rocket at finite angle-of-attack. An unsteady CFD analysis method with a moving grid technique based on the Reynolds-averaged Navier-Stokes equations with the k-w SST transition turbulence model is applied to accurately predict the transonic loads of the rocket at pitching motion. It is shown that the fluctuating amplitude of the lateral aerodynamic loads imposed on the rocket due to the pitching motion can be significantly increased in the transonic flow region.

• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.511-521
• /
• 2014

This study proposes an electric vehicle (EV) smart panel board and its control method on the basis of charging scheduling. The proposed system consists of batteries, a three-phase battery charger, three single-phase inverters, transfer switches for electric power distribution, and a controller. The three-phase battery charger usually charges the batteries at midnight when electric rates are cheap and in light load. When the electric power consumption of the EV standard chargers connected to one phase of the power line is relatively large or when a blackout occurs, the electric power stored in the battery is supplied by discharging through the inverters to the EV standard chargers. As a result, the value of peak load and the charging electric power quantity supplied from a utility grid are reduced, and the current unbalance is improved. The usefulness of the proposed system is confirmed through simulations, experiments, and case studies.