• Journal of computational fluids engineering
• /
• v.10 no.3 s.30
• /
• pp.27-35
• /
• 2005

A design optimization of hypersonic flight vehicle has been studied by using upwind Navier-Stokes method and numerical optimization method. CFD method is linked to numerical optimization method by using a Bezier curve and a design optimization of blunt nose hypersonic flight vehicle has been studied. Heat transfer coefficient and drag coefficient are selected as objective functions or design constraints. The Bezier curve-based shape function was applied to blunt body shape.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.134-146
• /
• 1996

Numerical and experimental studies are performed to investigate the effect of the underbody shape of the simplified road vehicle on drag and life. Four different vehicle models with front and rear slanted variations at the lower surface are used in this study. Cases with a slanted underbody surface at front have smaller drag than those without a slanted surface. Also, cases with a slanted underbody surface at rear have smaller lift than those without a slanted surface. Pressure distributions along the model surfaces and velocity fields at the wake region are examined in detail. In general, numerical solutions are in agreement with experimental results.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.440-445
• /
• 2003

Maglev is the vehicle which can run in levitated condition by the electro-magnets, and propelled by linear induction motors. The Maglev is divided in two parts such as carbody and bogies, and the bogies are the driving device of the vehicle. The frame of the bogie must endure many loads occurred in the operation of the vehicle. So the bogie frame is designed and manufactured in the view of good safety and maintainability. The methods of design of frames are developed in regards of stresses and weights of structures. In this research, the extrusion of bogie frame is re-designed by the process of topology optimization with the ANSYS. By this process, the optimal shape of extrusion is acquired and additional optimization researches would be required in the view of size and shape of the members in the extrusion.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.7-12
• /
• 2010

When a vehicle is running, wheel is generating vertical and lateral force on the rail, in addition to load of vehicle, through a complicated set of motions. The derailment coefficient refers to the ratio of lateral force to vertical force(wheel load), and if the value exceeds a certain level, a wheel climbs or jumps over the rail. That's why the value is used as a criterion for running safety. Derailment coefficient of rolling stocks alters according to shape of rail track. I measured three-dimensional angular velocity and acceleration to use 3D Motion Tracker. Test result, derailment coefficient of rolling stocks and shape of rail track examined closely that have fixed relation. Specially, was proved that roll motion has the close coupling relation.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.51-53
• /
• 2008

The vehicle aerodynamic crosswind characteristics are mainly governed by the coefficient of side force and yawing moment. These performances affect not only the driving comfort which can be felt by driver but also the safety due to the instability of vehicle. The aims of this investigation are to improve the aerodynamic crosswind performance of sedan vehicle under the crosswind conditions. In order to improve the crosswind stability, numerical analysis has been performed by modifying the rear body shape of vehicle. As the results, we observed about 20% reduction of yawing moment coefficient relative to the base vehicle.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.925-931
• /
• 2012

The air-conditioner for railway vehicle should have vibration durability in order to operate normally in vehicle running situation. KS R 9144(vibration test methods for railway vehicle parts) is used to verify the vibration durability. The specifications of compressor, condenser and evaporator for air-conditioner in railway vehicle are standardized, but the shape and structure of pipe lines are not specified. Because the air-conditioner handler produces the pipe line arbitrarily, sometimes the pipe line is broken during the vibration durability test. In this research the cause identification and solution of pipe line breaking problem in during the vibration durability test were studied for air-conditioner of railway vehicle(diesel multiple unit). It was found that the natural frequency of pipe line is related to the pipe line breaking by experiment. A new pipe line shape was introduced by using FEA in order to avoid the resonance. The prototype new pipe line was applied to air-conditioner and the natural frequency was measured by experiment in order to verify the resonance avoidance. The vibration reduction of air-conditioner with new pipe line was reviewed by comparing to the air-conditioner with original one.

• Archives of design research
• /
• v.15 no.4
• /
• pp.409-416
• /
• 2002

The overall concept of the interior space on a vehicle, which is related to the exterior design presents a new turning point at the body design concept on a vehicle and it means the interior space on a vehicle has the largest portion. The concept of the roominess at the interior space is consisted on many physical dimensions for the comfort of passengers, but these elements should be considered also as the result of the dynamic reflections of the characteristics of market demand, and it is not only to designate the physical dimensions and positions of the interior design elements, but also to influence to the total body shape of the vehicle. These days the concept of the interior space is now on the way of changing which is not limited only to the passenger car. The change is more evident especially at the total body shape which is not only the details of the exterior style and it would expend to other type of vehicles.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.1
• /
• pp.24-31
• /
• 2013

The motion of living organisms such as birds, fishes, and insects, has been analyzed for the purpose of the design of MAV(Micro Air Vehicle) and NAV(Nano Air Vehicle). In this research, natural motion was considered to be applied to the determination of the geometry and motion of AUV(Autonomous Underwater Vehicle). The flapping motion of a number of hydrofoil shapes in AUV was studied, and at the same time, the optimization of the hydrofoil shape and flapping motion was executed that allow the highest thrust and efficiency. The harmonic motion of plunging and pitching of NACA 4 digit series models, was used for the numerical analysis. The meta model was made by using the kriging method in Optimization method and the experimental points of 49 were extracted for the OA(Orthogonal array) in DOE(Design of experiments). Parametric study using this experimental points was conducted and the results were applied to MGA(Micro Genetic Algorithm). The flow simulation model was validated to be an appropriate tool by comparing with experimental data and the optimized shape and motion of AUV was turned out to produce highest thrust and efficiency.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.137-145
• /
• 2002

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. a lightweight vehicle body is salutary to save operating costs and fuel consumption. Therefore this study is to perform the size and the shape optimization of crossbeam for electric vehicle using the method of topology optimization to introduce the concept of homogenization based on optimality criteria method which is efficient for the problem having the number of design variables and a few boundary condition. this provides the method to determine the optimum position and shape of circular hole in the cross beam and then can achieve the optimal design to reduce weight.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.876-883
• /
• 2002

Electric vehicle body has to be subjected to uniform load and requires auxiliary equipment such as air pipe and electric wire pipe. Especially, the cross beam supports the weight of passenger and electrical equipments. a lightweight vehicle body is salutary to save operating costs and fuel consumption. Therefore this study is to perform the size and the shape optimization of crossbeam fur electric vehicle using the method of topology optimization to introduce the concept of homogenization based on optimality criteria method which is efficient for the problem having the number of design variables and a few boundary condition. this provides the method to determine the optimum position and shape of circular hole in the cross beam and then can achieve the optimal design to reduce weight.