• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.84-89
• /
• 2001

Studied in this paper was the vehicle dynamics simulation for development of single axle bogie using the multi-body dynamics simulation program(VAMPIRE). Single axle bogie vehicle is to the crew of freight vehicle. Method of analysis for dynamic behaviors of vehicle having single axle bogie was carried by UIC(International Union of Railways) code 518 and results of analysis were presented in terms of the hunting stability and the derailment ratio and the sum of wheel/rail lateral force. The results of analysis meet the criteria proposed by UIC.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1028-1040
• /
• 2000

A numerical method is presented for the dynamic analysis of military tracked vehicles of high mobility. To compute the impulsive dynamic contact forces which occur when a vehicle passes on a ground obstacle, the track is modeled as the combination of elastic links interconected by pin joints. The mass of each track link, the elastic elongation of a track link between pin joints by the track tension, and the elastic spring effects on the upper and lower surfaces of each track link have been considered in the equations of motion. And the chassis, torsion bar arms, and road wheels of the vehicle are modeled as the rigid multi bodies connected with kinematic constraints. The contact positions and the contact forces between the road wheels and track, and the ground and the the track are simultaneously computed with the solution of the equations of motions of the vehicle consisting of the multibodies. The iterative scheme for the solution of the multi body dynamics of the tracked vehicle is presented and the numerical simulations are conducted.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.211-216
• /
• 2003

The influence of braking force generated by one tire on vehicle dynamics was investigated by simulation and ground test. A 8 d. o. f vehicle model was developed for simulation. And a special device to apply brake pressure to individual wheel was built for vehicle test. As a result of corner braking test on straight driving, the dynamic responses such as yawrate, lateral acceleration and roll angle were produced in the vehicle, which were in a good agreement to the simulation results. This shows that comer braking used in VDC system can control vehicle dynamics to improve controllability and directional stability.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권6호
• /
• pp.614-619
• /
• 2015

본 연구는 자율무인잠수정의 운동성능을 예측하기 위한 동역학모델에 관한 연구이다. 이 모델은 선체의 동역학 상태변수들과 잠수정의 운동을 결정하는 힘들의 항으로 구성되어 있다. 힘에 영향을 주는 항은 유체정역학적 힘, 부가질량에 의한 힘, 유체동역학적 감쇠력, 그리고 양력과 항력으로 구성된다. 이 힘의 항들을 이론식과 유체동역학해석법에 의해 구하였다. 수중운동 시뮬레이션에는 PD제어기를 사용하였다. 또한 유체항력은 수조시험을 통해서 검증하였고, 무인잠수정의 운동성능은 인근 실해역에서의 경유점 추종시험을 통해서 부분적으로 검증하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.981-992
• /
• 2006

In this paper, a lateral vehicle control using the concept of control configured vehicle (CCV) is presented. The control objectives for the lateral dynamics of a vehicle include the ability to follow a chosen variable without significant motion change in other specified variables. The analysis techniques for decoupling of the aircraft motions are utilized to develop vehicle lateral control with advanced mode. Vehicle lateral dynamic is determined to have the steering input and control torque input. The additional vehicle modes are also defined to using CCV concept. We use right eigenstructure assignment techniques and command generator tracker to design a control law for an lateral vehicle dynamics. The desired eigenvectors are chosen to achieve the desired decoupling (i.e., lateral direction speed and yaw rate). The command generator tracker is used to ensure steady-state tracking of the driver's command. Finally, the developed design is utilized by using the lateral vehicle dynamic with four wheel.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.1002-1011
• /
• 2006

In this paper, a lateral vehicle control using the concept of control configured vehicle(CCV) is presented. The control objectives for the lateral dynamics of a vehicle include the ability to commend a chosen variable without significant motion change in other specified variables. The analysis techniques fur decoupling of the aircraft motions are utilized to develop vehicle lateral control with advanced mode. Vehicle lateral dynamic is determined to have the steering input and control torque input. The additional vehicle modes are also defined to using CCV concept. We use right eigenstructure assignment techniques and command generator tracker to design a control law for an lateral vehicle dynamics. The desired eigenvectors are chosen to achieve the desired decoupling(i.e., lateral direction speed and yaw rate). The command generator tracker is used to ensure steady-state tracking of the driver's command. Finally, the developed design is utilized by using the lateral vehicle dynamic with four wheel.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1125-1134
• /
• 2004

This paper presents a mathematical model which is about the dynamics of not only a two wheel steering vehicle but a four wheel steering vehicle. A sliding mode ABS control strategy and PID rear wheel control logic are developed to improve the brake and cornering performances, and enhance the stability during emergency maneuvers. The performances of the controllers are evaluated under the various driving road conditions and driving situations. The numerical study shows that the proposed full car model is sufficient to accurately predict the vehicle response. The proposed ABS controller reduces the stopping distance and increases the vehicle stability. The results also prove that the ABS controller can be employed to a four wheel steering vehicle and improves its performance. The four wheel steering vehicle with PID rear wheel controller shows increase of stability when a vehicle speed is high and sharp cornering maneuver when a vehicle speed is low compared to that of a two wheel steer vehicle.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.199-206
• /
• 2006

Real time vehicle dynamics models have been developed with the subsystem synthesis method for intelligent vehicle HILS system. Three different models for solving subsystem equations are compared in order to find out the best suitable model for HILS applications. The first model is based on the generalized coordinate partitioning technique, and the second one is on the approximate function approach, and the last one is on the constraint stabilization method. To investigate the theoretical efficiency of three proposed methods, arithmetic operators used in the formulations of three models are counted. Bump run simulations with half-sine bump have also carried out with three different models to measure the actual CPU time to validate theoretical investigation.

• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.299-306
• /
• 2008

The electromagnet in Maglev vehicles controls the voltage in its winding to maintain the air gap, a clearance between the electromagnet and guideway, within an allowable deviation, with strongly interacting with the flexible guideway. Thus, the vibration characteristics of guideway plays important role in dynamics of Maglev vehicles using electromagnet as an active suspension system. The effects of the guideway's vibrational characteristics on dynamics of the Maglev vehicle UTM-01 are analyzed. The coupled equations of motion of the vehicle/guideway with 3 DOFs are derived. Eigenvalues are calculated and frequency response analysis is also performed for a clear understanding of the dynamic characteristics due to guideway vibration characteristics. To verify the results, tests of the urban Mgalev vehicle UTM-02 are carried out. It is recommended that the natural frequency of the guideway be minimized and its damping ratio in the Maglev vehicle with a 5-states feedback control law as a levitation control law.

• 한국해양공학회지
• /
• 제28권2호
• /
• pp.167-176
• /
• 2014

This paper proposes an optimum curve driving method for adeep-seabed mining robot(MineRo) in deep-sea soft ground. MineRo was designed as afour-row tracked vehicle. A study on the turning methods for the four-row tracked vehicle was conducted using three case by changing the velocity profile of each track. The configuration of the four-row tracked vehicle and soft ground equation are introduced, along with the dynamics analysis models of MineRo and soft ground, which were constructed using the commercial software DAFUL. Because the purpose of this study was to investigate a driving method on soft ground, the marine environment of the deep sea was not considered.