• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.705-709
• /
• 2005

In this paper, we introduce fuzzy algorithm similar to human's way of thinking and designed collision detection system of vehicles. First, before the model vehicles design, we did simulation collision detection using PID and Fuzzy Controller. As a result, P.O that is Percent Overshoot when make use of PID controller happened from smallest 32% to 45%. But, In case of using fuzzy controller they produced about 10% in 7% in case use 25 rule. We designed model vehicles that introduce Auto Guided Vehicle(AGV) with confirmed result in simulation. We set Polaroid 6500 sensor on the front of model automobile because distinguish existence automobile to the head. And we composed motor drive part to run vehicles and 80C196KC processor for control movement of vehicles influenced on distance data of the front vehicles that receive from supersonic waves sensor. In case of using Fuzzy controller, last value percent error happened about maximum 15% in smallest 5%, and we confirmed that distance with front vehicles kept when state hold time is about maximum 16 seconds in smallest 10 seconds.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.342-348
• /
• 2016

We propose an obstacle detection algorithm for unmanned ground vehicle on uneven terrain. The key ideas of the proposed algorithm are the use of two-layer laser range data to calculate the gradient of a target, which is characterized as either ground or obstacles. The proposed obstacle detection algorithm includes 4-steps: 1) Obtain the distance data for each angle from multiple lidars or a multi-layer scan lidar. 2) Calcualate the gradient for each angle of the uneven terrain. 3) Determine ground or obstacle for each angle on the basis of reference gradient. 4) Generate a new distance data for each angle for a virtual laser scanner. The proposed algorithm is verified by various experiments.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.61-66
• /
• 2019

VANET (Vehicular Ad-hoc Network) is a mobile Ad-hoc Network which deals with the moving vehicles. VANET supports Intelligent Transport Systems (ITS) which is related to different modes of transport and traffic management techniques. VANETs enabled users to be informed and make them safer. VANET uses IEEE 802.11p standard wireless access protocol for communication. An important and necessary issue of VANET is to design routing protocols. In a network, communication takes place by the use of the routing protocols. There are mainly two types of communications used such as Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) in VANET. Vehicles can send and receive messages among them and also to and from infrastructure used. In this paper, AODV, DSR and DSDV are compared by analysing the results of simulation on various metrics such as average throughput, instant throughput, packet delivery ratio and residual energy. Findings indicates utilization of AODV and DSR is more applicable for these metrics as compared to DSDV. A network simulator (NS2) is used for simulation.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.343-349
• /
• 2011

Now, for the continuous location detection of train, the method that the moving distance of a vehicle is detected using an wheel sensor(odometer) mounted within a train, is generally used. It has a problem that the positioning errors of a train can be accumulated as the moving distance increases. To solve this problem, it is required to apply a variety of positioning sensors and to integrate with sensor data. In this paper, we develop the train-borne positioning system applicable to the conventional railway and high-speed railway, and verify the performance of the train-borne positioning system through a vehicle test.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.5
• /
• pp.9-18
• /
• 2004

This paper presents a vehicle detecting algorithm using microwave system signals. The Proposed algerian decides the breakpoint of signals using the likelihood criteria. The decided signals are segmented and simplified. The proposed searching algorithm uses the Euclid distance from the weighted signal data. We tested the proposed algorithm to compare with the segmentation which is a method using smoothing and edge detection. We confirm that the proposed algorithm is very useful for detecting vehicles by field test.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.168-173
• /
• 2018

To overcome the problems of the existing black box which is exposed to the risk of blind spots in the imaging of a fixed front and rear views of an object, this paper suggests a new intelligent black box that can detect and shoot side views of an object. This paper proposes an algorithm of the intelligent black box with a rotating function in order to compensate for the side blind spot of the vehicle. This intelligent black box with rotating screen adopts the infrared distance sensor to sense an object which approaches to the vehicle and rotates automatically towards the object.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.708-716
• /
• 2017

We deal with the target selection in seeker-detection image through network, using the detection information from aerial vehicle and the target information from surveillance and reconnaissance system. Especially, we constrain the sea battle environment, where it is difficult to perform scene-matching rather than land. In this paper, we suggest the target selection algorithm based on the confidence estimation with respect to distance and size. In detail, we propose the generation method of reference point for distance evaluation, and we investigate the effect of pixel margin and target course for size evaluation. Finally, the proposed algorithm is simulated and analyzed through several scenarios.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.191-197
• /
• 2016

RCAR low speed impact test estimates repair cost of the impacted vehicle. In this study, for a mid-size vehicle front body model, structural performance for RCAR low speed impact were analyzed with changing the bumper stay shape and size. First, for improving the impact load transfer mechanism to side member the stay rear section shape at connecting area with side member was modified and the stay outer was redesigned to be normal to the barrier. Next, the investigation on stay thickness effect was carried out and the performances of several models with different forming shape were compared. The final design showed 13mm decrease in the maximum barrier intrusion distance and greatly reduced side member deformation. Additional analyses explained the validity of the final design.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2011

This paper discusses models for estimating dynamic travel times based on probability theory. The dynamic travel time models proposed in the paper are formulated assuming that the travel time of a vehicle depends on the distribution of the traffic stream condition with respect to the location along a road when the subject vehicle enters the starting point of a travel distance or with respect to the time at the starting point of a travel distance. The models also assume that the dynamic traffic flow can be represented as an exponential distribution function among other types of probability density functions.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.452-456
• /
• 2009

This paper presents a method for precisely localizing and parking of bimodal trams. In order to gam an automatically driving system for bimodal trams, precise up-to-date localization, velocity recognition, distance to next station and precise parking location estimation functions are required. This paper proposes a system consisting of control device, steering device, sensor input equipment, driving system, tachometer, vehicle-side sensors, magnetic markers and magnetic sensors. The tram recognizes the precise location via magnetic markers containing information. Parking position and precise distance calculation is embodied by a tachometer. The vehicle-side sensors are used to assure safe station approaching and parking magnetic markers provide improvement of precision while tram parking. This paper provides a system realizing localization and precise parking and afterwards the automatic drive test results are reported and analyzed.