• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.329-336
• /
• 2006

This paper describes a lane change assistance system for the help of safe lane change, which detects vehicles approaching from the rear side by using a computer vision algorithm and notifies the possibility of safe lane change to a driver. In case a driver tries to lane change, the proposed system can detect vehicles and keep track of them. After detecting side lane lines, region of interest for vehicle detection is decided. For detection a vehicle, optical flow technique is applied. The experimental result of the proposed algorithm and system showed that the vehicle detection rate was 91% and the embedded system would have application to a lane change assistance system being commercialized in the near future.

• Journal of Multimedia Information System
• /
• v.6 no.3
• /
• pp.119-124
• /
• 2019

In this paper, a method of detecting vehicle plates through depth pictures is proposed. A vehicle plate can be recognized by detecting the plane areas. First, plane factors of each square block are calculated. After that, the same plane areas are grouped by comparing the neighboring blocks to whether they are similar planes. Width and height for the detected plane area are obtained. If the height and width are matched to an actual vehicle plate, the area is recognized as a vehicle plate. Simulations results show that the recognition rates for the proposed method are about 87.8%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.71-77
• /
• 2007

Dangerous driving is a major cause of traffic accidents in Korea. It becomes more serious for commercial vehicles due to higher fatality rates. The Safe Driving Management System (SDMS), developed in this research, is a comprehensive solution that monitors and stores driving conditions of vehicles, detects dangerous driving situations, and analyzes the results in real time. The Safe Driving Management System consists of a vehicle movement information controller, a dangerous driving detection algorithm and a vehicle movement data report and analysis program. The dangerous driving detection algorithm detects and classifies dangerous driving conditions into representative cases such as sudden acceleration, sudden braking, sudden lane change, and sudden turning. Both computer simulation and vehicle test have been conducted to develop and verify the algorithm. The Safe Driving Management System has been implemented on commercial buses to verify its reliability and objectivity. It is expected that the system can contribute to prevention of traffic accidents, systemization of safe driving management and reduction of commercial vehicle operation costs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.72-79
• /
• 2004

A method for thruster fault diagnosis for launch vehicle upper stage was developed. In order to protect the launch vehicle against the occurrence of faults, it is necessary to detect and identify the fault, as well as to reconfigure the controller of the vehicle. Considering the upper stage launch vehicle using reaction control system, an analytical method was adopted in order to detect the fault occurred in thruster. The fault detection scheme can be applied to the system regardless of the form of thruster fault occurred - leakage or lock-out. Results from processor-in-the-loop simulation are provided to demonstrate the validity of this fault detection and isolation scheme for the upper stage launch vehicle.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.303-312
• /
• 2000

In this paper, we describe an image processing algorithm which is able to recognize the road lane. This algorithm performs to recognize the interrelation between AGV and the other vehicle. We experimented on AGV driving test with color CCD camera which is setup on the top of vehicle and acquires the digital signal. This paper is composed of two parts. One is image preprocessing part to measure the condition of the condition of the lane and vehicle. This finds the information of lines using RGB ratio cutting algorithm, the edge detection and Hough transform. The other obtains the situation of other vehicles using the image processing and viewport. At first, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, if vehicle knows the driving conditions which are lane angle, distance error and real position of other vehicles, we should calculate the reference steering angle.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.49-60
• /
• 2008

The current VIPS are not effective in safety point of view, because they are originally developed for mimicking loop detectors. Therefore, it is important to identify vehicle trajectories in real time, because recognizing vehicle movements over a detection zone enables to identify which situations are hazardous, and what causes them to be hazardous. In order to improve limited safety functions of the current VIPS, this research has developed a computer vision system of monitoring individual vehicle trajectories based on image processing, and offer the detailed information, for example, incident detection and conflict as well as traffic information via tracking image detectors. This system is capable of recognizing individual vehicle maneuvers and increasing the effectiveness of various traffic situations. Experiments were conducted for measuring the cases of incident detection and abnormal vehicle trajectory with rapid lane change.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.4
• /
• pp.266-270
• /
• 2016

In this paper, we propose a technique of drowsiness detection using machine vision. The drowsiness of vehicle driver is often the primary cause of motor vehicle accidents. Therefore, the checking of eye images for detecting drowsiness status of driver is critical for preventing these accidents. In our suggested method, we analyze the changes of histogram and edge of eye region images which are acquired using CCD camera. We developed a drowsiness detection system using the histogram and edge change information. The experimental results show that our proposed method enhances the accuracy of detecting drowsiness nearly to 98%, and can be used for preventing vehicle accidents due to the drowsiness of drivers.

• Journal of Information Processing Systems
• /
• v.15 no.5
• /
• pp.1218-1230
• /
• 2019

This study proposes a novel video traffic flow detection method based on machine vision technology. The three-frame difference method, which is one kind of a motion evaluation method, is used to establish initial background image, and then a statistical scoring strategy is chosen to update background image in real time. Finally, the background difference method is used for detecting the moving objects. Meanwhile, a simple but effective shadow elimination method is introduced to improve the accuracy of the detection for moving objects. Furthermore, the study also proposes a vehicle matching and tracking strategy by combining characteristics, such as vehicle's location information, color information and fractal dimension information. Experimental results show that this detection method could quickly and effectively detect various traffic flow parameters, laying a solid foundation for enhancing the degree of automation for traffic management.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.621-626
• /
• 2015

This paper presents a camera calibration method in order to estimate the lane detection and inter-vehicle distance estimation system for an automotive safety driving system. In order to implement the lane detection and vision-based inter-vehicle distance estimation to the embedded navigations or black box systems, it is necessary to consider the computation time and algorithm complexity. The process of camera calibration estimates the horizon, the position of the car's hood and the lane width for extraction of region of interest (ROI) from input image sequences. The precision of the calibration method is very important to the lane detection and inter-vehicle distance estimation. The proposed calibration method consists of three main steps: 1) horizon area determination; 2) estimation of the car's hood area; and 3) estimation of initial lane width. Various experimental results show the effectiveness of the proposed method.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.619-624
• /
• 2021

Vehicle orientation detection is a challenging task because the orientations of vehicles can vary in a wide range in captured images. The existing methods for oriented vehicle detection require too much computation time to be applied to a real-time system. We propose Rotate YOLO, which has a set of anchor boxes with multiple scales, ratios, and angles to predict bounding boxes. For estimating the orientation angle, we applied angle-related IoU with CIoU loss to solve the underivable problem from the calculation of SkewIoU. Evaluation results on three public datasets DLR Munich, VEDAI and UCAS-AOD demonstrate the efficiency of our approach.