• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.240-244
• /
• 2006

In this paper, magnetic properties and annealing behavior of spin valve structures using Mo(MoN) layers as underlayers were studied varying the thickness of the underlayers. The spin valve structure was consisted of Si substrate/$SiO_2(2,000{\AA})/Mo(MoN)(t{\AA})/NiFe(21\;{\AA})/CoFe(28\;{\AA})/Cu(22\;{\AA})/CoFe(18\;{\AA})/IrMn(65\;{\AA})/Ta(25\;{\AA})$. Also, MoN films were deposited on Si substrates and their thermal annealing behavior was analyzed. The resistivity of the MoN film increased as the $N_2$ gas flow rate was increased. After annealing at $600^{\circ}C$, XRD results did not show peaks of silicides. XPS results indicated MoN film deposited with 5 sccm of $N_2$ gas flow rate was more stable than the film deposited with 1 sccm of $N_2$ gas flow rate. The variations of MR ratio and magnetic exchange coupling fold were small for the spin valve structures using Mo(MoN) underlayers up to thickness of45 ${\AA}$. MR ratio of spin valves using MoN underlayers deposited with various $N_2$ gas flow rate was about 7.0% at RT and increased to about 7.5% after annealing at $220^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased to about 3.5%. Variation of $N_2$ gas flow rate up to 5 sccm did not change the MR ratio and $H_{ex}$ appreciably.

• Particle and aerosol research
• /
• v.17 no.2
• /
• pp.21-27
• /
• 2021

We developed non-metallic electrodes that can replace metallic electrodes of the electrostatic precipitator(ESP) for the purpose of light weight, corrosion resistance, cost reduction. We manufactured three types of collection electrodes made of stainless steel (M), Carbon ink coating layer-Plastic sheet-Carbon ink coating layer (CPC), and Plastic sheet-Carbon ink coating layer-Plastic sheet (PCP). We studied the collection efficiency of a two-stage ESP using oil mist particles with and without collection stage by changing the flow rate, the material of collection electrode, and the applied voltage of the pre-charger module and the collection module. Here we measured concentrations of particles at diameters of 0.45 ㎛ (CMD; count median diameter) and 3.0 ㎛ (MMD : mass median diameter), as well as PM_2.5 and PM₁₀. As a result of the experiment, two-stage ESP had 22~25% higher collection efficiency in PM_2.5 than one-stage ESP at the same applied voltage. The difference in collection efficiency by varying the materials of collection electrodes was less than 5%. The weight of the non-metallic electrode was only one eighth the weight of the metal electrode. CPC electrode had a thickness of 0.27 mm, which was 1.5 times thinner than a thickness of PCP electrode, so when the flow rate increased, the CPC electrodes couldn't be kept at equal intervals due to the fluttering unlike PCP electrodes. In addition, the PCP-CPC collection module of the present experiment followed the theoretical efficiency based on Deutsch equation and Cochet's charging theory.

• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.169-176
• /
• 2021

An experiment was conducted to investigate the effects of varying levels of hydrolyzed yeast on egg production and egg quality in aged laying randomly allotted to three dietary treatments such that egg production was similar in each treatment (6 replicates of 10 birds each). The layers were fed diets containing 0, 0.1, or 0.2% hydrolyzed yeast for eight weeks. No significant difference was observed in egg production during the first half of the experiment. Egg production and daily egg mass in groups fed diets containing hydrolyzed yeast were significantly higher (P<0.05) than those of the control groups during the second half of the experiment. Egg weight was not affected by the dietary treatment. Eggshell strength and thickness in groups fed diets containing hydrolyzed yeast were significantly higher than those of the control groups during the overall experimental period (P<0.05). Although no significant differences were observed in the Haugh units, yolk color in the group fed diets containing 0.1% hydrolyzed yeast was significantly higher than that in the control group (P<0.05). The mammillary layer thickness increased in a linear manner and significantly following treatment with dietary hydrolyzed yeast (P<0.05). Antibody titer against avian influenza virus in the group fed diets containing 0.2% hydrolyzed yeast was significantly higher (P<0.05) than that in the control group. In conclusion, dietary hydrolyzed yeast improved egg production and eggshell quality of laying hens in the late stages of production.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.217-222
• /
• 2023

The purpose of this paper was to synthesize a polymer organic hard mask that simplifies the manufacturing process, reduces process time significantly, and thereby lowers manufacturing costs. The results of measuring residual metals through vapor refining showed that 9-Naphthalen-1-ylcarbazole(9-NC) measured 101.75ppb in the 4th zone, 2-Naphthol (2-NA) measured 306.98ppb in the 5th zone, and 9-Fluorenone(9-F) measured between 129.05ppb across the 4th and 5th zones. After passing through a filtration system, the synthesized organic hard mask measured residual metals in the range of 9 to 7ppb. Additionally, the thermal analysis indicated a decrease of 2.78%, a molecular weight of 942, carbon content of 89.74%, and a yield of 72.4%. The etching rate was measured at an average of 18.22Å/s, and the coating thickness deviation was averaged at 1.19. For particle sizes below 0.2㎛ in the organic hard mask, no particles were observed. By varying the coating speed at 1,000, 1,500, and 1,800rpm and measuring the resulting coating thickness, the shrinkage rate ranged from 17.9% to 20.8%. The coating results demonstrated excellent adhesion to SiON, and it was evident that the organic hard mask was uniformly applied.

• Korean Journal of Radiology
• /
• v.24 no.4
• /
• pp.305-312
• /
• 2023

Objective: Chronic enteropathy associated with SLCO2A1 gene (CEAS) is a recently recognized disease. We aimed to evaluate the enterographic findings of CEAS. Materials and Methods: Altogether, 14 patients with CEAS were confirmed based on known SLCO2A1 mutations. They were registered in a multicenter Korean registry between July 2018 and July 2021. Nine of the patients (37.2 ± 13 years; all female) who underwent surgery-naïve-state computed tomography enterography (CTE) or magnetic resonance enterography (MRE) were identified. Two experienced radiologists reviewed 25 and 2 sets of CTE and MRE examinations, respectively, regarding the small bowel findings. Results: In initial evaluation, eight patients showed a total of 37 areas with mural abnormalities in the ileum on CTE, including 1-4 segments in six and > 10 segments in two patients. One patient showed unremarkable CTE. The involved segments were 10-85 mm (median, 20 mm) in length, 3-14 mm (median, 7 mm) in mural thickness, circumferential in 86.5% (32/37), and showed stratified enhancement in the enteric and portal phases in 91.9% (34/37) and 81.8% (9/11), respectively. Perienteric infiltration and prominent vasa recta were noted in 2.7% (1/37) and 13.5% (5/37), respectively. Bowel strictures were identified in six patients (66.7%), with a maximum upstream diameter of 31-48 mm. Two patients underwent surgery for strictures immediately after the initial enterography. Follow-up CTE and MRE in the remaining patients showed minimal-to-mild changes in the extent and thickness of the mural involvement for 17-138 months (median, 47.5 months) after initial enterography. Two patients required surgery for bowel stricture at 19 and 38 months of follow-up, respectively. Conclusion: CEAS of the small bowel typically manifested on enterography in varying numbers and lengths of abnormal ileal segments that showed circumferential mural thickening with layered enhancement without perienteric abnormalities. The lesions caused bowel strictures that required surgery in some patients.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.598-605
• /
• 1993

Methacryloxyethyl dimethyl alkyl($C_{1}\sim C_{12}$, benzyl and 2, 2-diethoxy ethyl) ammonium bromide monomers were prepared to investigate the relative humidity characteristics for polymer electrolytes with different chemical structures. They were coated on the alumna substrate printed comblike gold electrode by photopolymerization after micro-syringe injection. As the thickness of rhe humid membrane increased, the impendance decreased, whereas the impedance ~ncreased as the carbon cham of alkyl substituent in the monomer increased. The impendance of the polymeric electrolytes with $C_6\sim C_8$ substituents were varied from 19M$\Omega$ to 5K$\Omega$ for the range of 30-90% Mi. The temperature depedence coefficient in the range of 15-$35^{\circ}C$ was found to be -0.45% $RH/^{\circ}C$and the hysteresis falled within the range of $\pm$2% RH. The response time was 35 second for varying humldity from 33% to 85% RH.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.4
• /
• pp.323-329
• /
• 2012

In this study, a new optical method for oil detection using an analysis the light-absorption image of separate oil-water mixture with a LED illumination is described. To obtain an information about the presence of oil on water and the thickness of oil, the intensity of light-absorption images acquired through CCD is analyzed. To select the optimal wavelength of the light source, the experiment is conducted using several LEDs having four different wavelength. In the case of using a blue LED having 465 nm wavelength, an intensity decreasing tendency of light-absorption image is obvious and clear. To identify the applicability of sensing system at the real sea condition, experiments are conducted as varying the brightness and water surface angle. Through this research, new optical oil detection methodology is proposed using the absorption difference between water and oil with single-wavelength LED and CCD.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.177-180
• /
• 2016

The effect of varying thickness of Ag/Ti metal bilayer and annealing time have investigated for controlling self-organized nanoparticles (NPs) on 4H-SiC substrate. In addition, Glass and Si substrate which have different surface energy from SiC were fabricated for analyzing interaction of agglomeration. The results of FE-SEM indicated the different formation behaviors of NPs in various ranges of fabrication condition. The surface energy was measured by using a Contact Angle Analyzer. The formation of network-like NPs was observed on Glass and 4H-SiC, respectively, whereas it was not the case on Si substrates. It has been found that the size of NPs increases with decreasing surface energy, due to particle size-dependent hydrophilic properties of substrates. The different formation behavior was explained by using Young's equation for the contact angles between the metal and different substrates.

• Radiation Oncology Journal
• /
• v.1 no.1
• /
• pp.29-36
• /
• 1983

The treatment of tumors along curved surfaces with stationary electron beams using cone collimation may lead to non-uniform dose distributions due to a varying air gap between the cone surface and patient. For large tumors, more than one port may have to be used in irradiation of the chest wall, often leading to regions of high or low dose at the junction of the adjacent ports. Electron-beam arc therapy may elimination many of these fixed port problems. When treating breast tumors with electrons, the energy of the internal mammary port is usually higher than that of the chest wall port. Bolus is used to increase the skin dose or limit the range of the electrons. We invertiaged the effect of various arc beam parameters in the isodose distributions, and combined into a single arc port for adjacent fixed ports of different electron beam eneries. The higher fixed port energy would be used as the arc beam energy while the beam penetration in the lower energy region would be controlled by a proper thickness of bolus. We obtained the results of following: 1. It is more uniform dose distribution of electron to use rotation than stationary irradiation. 2. Increasing isocenter depth on arc irradiation, increased depth of maximum dose, reduction in surface dose and an increasing penetration of the linear portion of the curve. 3. The deeper penetration of the depth dose curve and higher X-ray background for the smaller field sized. 4. If the isocenter depth increase, the field effect is small. 5. The decreasing arc beam penetration with decreasing isocenter depth and the isocenter depth effect appears at a greater depth as the energy increases. 6. The addition of bolus produces a shift in the penetration that is the same for all depths leaving the shape of the curves unchanged. 7. Lead strips 5 mm thick were placed at both ends of the arc to produce a rapid dose drop-off.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.759-765
• /
• 2002

Prestressing tendons in the wall of circular storage tank are investigated from the viewpoint of equivalent load method. Special attention is paid to the effectiveness of eccentricities of the hoop and vertical tendons. Local effect at the bent Point of vertical tendon in the wall with varying thickness is examined. Some aspects which are frequently overlooked or misinterpreted in the conventional analyses of vertical tendons are discussed. Numerical examples are presented to emphasize the significance of accurate analysis of the vortical tendon in practice. It is expected that the equivalent load method can be effectively used to simplify the analysis of tendons in the circular wall and to minimize the errors.