• 한국미생물·생명공학회지
• /
• 제14권5호
• /
• pp.355-358
• /
• 1986

M. inyoensis NRRL 3292에 의한 시소마이신 생산에 영향을 미치는 인자들에 관해 조사한 결과 cobalt chloride 및 methionine 모두가 시소마이신 생산을 현저히 촉진하였으며, 탄소원으로서는 전분 또는 덱스트린이 포도당에 비해 시소마이신 생성에 적합하였다. 특히 시소마이신 발효공정중 항생물질 생성시기에 발효액내의 용존 이산화탄소 농도가 낮을수록 시소마이신 생성 농도가 증가하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1258-1258
• /
• 2001

Estimation of sugar and reducing sugar content in molasses is very important task in sugar refineries. Conventional methods of determination of sugar content in molasses samples are highly time consuming and employ hazardous chemicals. Due to the physical properties of molasses, probability of error in conventional analytical techniques is high. These methods have proven to be inefficient for a process control in any sugar industry. Hence development of a rapid, inexpensive, physical and also accurate method for sugar determination in molasses will be highly useful. Near Infrared spectroscopy is being widely used worldwide as an analytical technique in food industry. The technique offers the advantage of being non-destructive and rapid. The present paper highlights the potential of near infrared reflectance spectroscopy as a rapid and automated analytical technique for determination of sugar and reducing sugar content in molasses. A number of molasses samples were collected during and after the sugar season from Havana Sugar Industry, Havana. The samples were chosen so as to obtain a wide range of concentration of sugar and reducing sugars. This was done in order to achieve a good calibration curve with widely spread data points. These samples were scanned in the region of 1100 - 2500 nm in diffuse reflectance mode. An indigenous ELICO NIR spectrophotometer, modified according to the requirements of sugar industry was used for this purpose. Each sample was also analyzed simultaneously by standard chemical methods. Chemical values were taken as reference for near infrared analysis. In order to obtain the most accurate calibration for the set of samples, various mathematical treatments were employed. Partial Least Square method was found to be most suitable for the analysis. A comparison is made between the actual values (chemical values) and the predicted values (NIR values). The actual values agree very well with the predicted values showing the accuracy of the technique. The validity of the technique is checked by predicting the concentration of sugar in unknown molasses samples using the calibration curve. The present investigation assesses the feasibility of the technique for on-line monitoring of sugars present in molasses in sugar industries.

• 한국식생활문화학회지
• /
• 제25권5호
• /
• pp.615-624
• /
• 2010

This study was conducted to investigate the use of sugar alcohols as alternative sweeteners for replacing sucrose in sponge cake. The sponge cakes were prepared with only sucrose or a 50% replacement of sucrose with various sugar alcohols (erythritol, sorbitol, and xylitol). The specific gravity of cake batter containing only sucrose was significantly higher and the viscosity was significantly lower than those containing sugar alcohol (p<0.001). Among sugar alcohols, xylitol was the most similar to sucrose. The thermal characteristics, as assessed by differential scanning calorimetry, showed that sucrose delayed gelatinization of cake batter more than sugar alcohol, as the onset temperature and the peak temperature of cake batter containing only sucrose were higher than those containing sugar alcohol. The moisture content of cake containing sorbitol was the highest and that containing only sucrose was the lowest among cakes. The specific volume of cakes containing only sucrose and xylitol were higher and the baking loss rate of those were lower than other sugar alcohols. The volume and symmetry index of cake containing only sucrose were the highest among cakes (p<0.001), and xylitol was similar to sucrose for the above indices. The redness (a) and yellowness (b) values of crust containing only sucrose were significantly higher than those containing sugar alcohols (p<0.001). The a and b values of crumb containing erythritol were the lowest among cakes, showing a pale yellowish color. The microstructure, as assessed by scanning electron microscopy, showed that the cake containing only sucrose had more uniformly and finely distributed pores and a smoother cross section than that containing sugar alcohols. Cake containing xylitol was similar to cake containing only sucrose. Hardness, chewiness, and gumminess of cake containing only sucrose were higher than those containing sugar alcohols, whereas the adhesiveness of cakes containing sugar alcohols were higher than those containing only sucrose (p<0.01). Among sugar alcohols, xylitol was the most similar to sucrose in textural properties. In a sensory quality test, the tenderness and moistness of cakes containing sorbitol and erythritol were higher than those containing only sucrose and xylitol. The overall acceptance of cakes containing xylitol and only sucrose were higher than those containing sorbitol and erythritol (p<0.001). Thus, xylitol is more appropriate as a 50% replacement for sucrose than erythritol and sorbitol when preparing sponge cake.

• 한국식품영양과학회지
• /
• 제27권5호
• /
• pp.897-902
• /
• 1998

This study was conducted to develop the standard recipe of Dopyun according to the various content of mung bean starch and sugar. The effects of mung bean starch(10%, 15%, 20%) and sugar(20%, 30%) were evaluated on textural and sensory properties of Dopyun through the mechanical properties using texture analizer and sensory evaluation. Color was tested by color and color difference meter. For sensory evaluation, higher content of sugar and lower content of mung been starch(sugar 30%, mungbean starch 10%) showed advantages in acceptance fo taste and overall quality. Mechanical properties of hardness, cohesiveness and chewiness of Dopyun were increased significantly in Dopyun with higher content of mung bean starch and sugar. The values of Hunter color system indicated that "L" and "b" values tended to decrease and "a" value increase, as the mung bean starch and sugar proportion increased. In the analysis of correlation between sensory evaluation and acceptance test, it was found that they were highly related. In view of the above results, it came to the conclusion that Dopyun with the addition of 30% sugar and 10% mung bean starch could give the best result among the groups studied.sult among the groups studied.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.313-316
• /
• 2000

The effects of initial sugar concentration and the various nitrogen sources on the fermentation characteristics of Thraustochytrium aureum were investigated. The sugar conversion ratios decrease with increase in the initial sugar concentration regardless of the kinds of nitrogen sources. The specific growth rate, the biomass yield, and the DHA yield also decreased but approached constant values higher than the concentration of 30g/L. The sugar conversion ratios and the specific growth rate showed the highest values in case of using the yeast extract as nitrogen source. It was difficult to conclude that the variation of nitrogen source had some effects on the biomass yield. However, the initial sugar concentration had a rather effects on the biomass yield for the sugar concentration of 40 g/L showed 0.27. The nitrogen source that showed the greatest yield of DHA was sodium glutamate.

• 대한방사선기술학회지:방사선기술과학
• /
• 제23권2호
• /
• pp.39-42
• /
• 2000

When ordinary sugar is exposed to ionizing radiation, a number of free radical are created in sugar, and Electron Paramagnetic Resonance (EPR) signal appears from the sugar because of the paramagnetic property of free radical. In this paper, EPR signal intensity has been measured in x-ray irradiated sugar for various absorbed doses, irradiated dose up to 50 Gy. The EPR intensity signals are increased as the x-ray irradiation increases. Also, the fading value decreased to about 3% in 30day after the irradiation. Therefore, the sugar is a useful material for emergency dosimeter as the free radical dosimetry with the EPR equipment.

• 센서학회지
• /
• 제29권6호
• /
• pp.433-439
• /
• 2020

Recently, the need for IoT-based intelligent systems is increasing in various fields. In this study, we implemented the system that automatically measures the sugar content of fruits without damage to fruit's marketability using near-infrared radiation and machine learning. The spectrums were measured several times by passing a broadband near-infrared light through a fruit, and the average value for them was used as the input raw data of the machine-learned DNN(Deep Neural Network). Using this system, he sugar content value of fruits could be predicted within 5 s, and the prediction accuracy was about 93.86%. The proposed non-destructive sugar content measurement system can predict a relatively accurate sugar content value within a short period of time, so it is considered to have sufficient potential for practical use.

• 한국식품조리과학회지
• /
• 제7권1호
• /
• pp.27-34
• /
• 1991

This study attempted to set up reasonable extraction time of Omija that was put in water for the various components to soak out. Changes of free sugars, organic acids, reducing sugar, total acid and tannin in Omija with various extraction times were investigated (together with the analysis of each components in Omija fruit). 1. High Performance Liquid Chromatography showed fructose, glucose, and sucrose to be the major free sugars of the Omija fruit. Free sugars and reducing sugar value in Omija beverage increased gradually in according with the extraction time, and marked 75.6% per total free sugars and 82.1% per total reducing sugar at 12 hours. 2. Gas Chromatography showed lactic acid, oxalic acid, fumaric acid, levulinic acid, succinic acid, malic acid, citric acid and pyroglutamic acid to be the major organic acids of the Omija fruit. Organic acids and total acids value in Omija beverage increased gradually on proportion to extraction time, and marked 97.0% per total organic acids at 9 hours and 79.0% per total acids at 12 hours. 3. Tannin content in Omija beverage was increased when extraction time was longer but it showed a low percentage as compared with the reducing sugar and total acid. Tannin content marked 48.8% per total tannin at 12 hours. 4. Sensory evaluation revealed that !1 hours of extraction produced the best quality products based in taste, flavor, color and over-all acceptability, considering the data, it seems possible to conclude that the optimum of time for extraction of Omija to water is 9 hours.

• 한국연초학회지
• /
• 제26권1호
• /
• pp.17-26
• /
• 2004

This study was conducted to get the informations for reducing the variation of chemical contents of leaf tobacco. The contents and variations of some chemical constituents of leaf(Leaf, Grade 2) produced in various growing areas from 1999 to 2003 and the effects of meteorological factors on the chemical constituents of leaf were analysed. The contents of analysed constituents of leaf showed high significant differences among crop years in flue-cured and burley, particularly the variation among crop years were higher in chlorine and nicotine contents while lower in total nitrogen content. There were significant differences among growing areas in nicotine and total sugar contents of flue-cured leaf and chlorine content of burley leaf. The total sugar content were negatively correlated to the nicotine and total nitrogen contents in flue-cured leaf. The average air temperature in June and July were positively correlated to the nicotine content of leaf while negatively to total sugar, and the precipitation in May were negatively correlated to the nicotine while positively to total sugar.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.122-131
• /
• 2001

Pakistan being the 6$^{th}$ largest sugar producer has over 75 sugar mills with annual production capacity of about 2.4 million tons during 1996-97. The contribution of Sindh with 27 sugar mills is recorded over 50% of the total sugar production. The majority of the mills in Pakistan use the Defecation-Remelt-Phosphitation (DRP; 24 mills), Defecation-Remelt-Carbonation (DRC; 21 mills) and Defecation-Remelt Carbonation and Sulphitation (DRCS; 11 mills) process. Seven of the 75 sugar mills in Pakistan also produce industrial alcohol from molasses, a by- product of sugar manufacturing process. These sugar industries also produce fly ash, which have been found to contain unburned carbon and reach as far as four-kilo meter area with the wind direction, threatening the community health of people living around, besides posing other aesthetic problems. The untreated wastewater, in many cases, finds its way to open surface drains causing serious threat to livestock, flora and fauna. One study showed that fly ash emitted from the chimneys contain particle size ranging from 38 ${\mu}{\textrm}{m}$ to 1000 ${\mu}{\textrm}{m}$. About 50 per cent of each fly ash samples were above 300 ${\mu}{\textrm}{m}$ in size and were mostly unburned Carbon particles, which produced 85% weight loss on burning in air atmosphere at 1000${\mu}{\textrm}{m}$. This fly ash (mostly carbon) was the main cause of many health and aesthetic problems in the sugar mill vicinity. The environmental challenge for the local sugar mills is associated with liquid waste gaseous emission and solid waste. This paper discusses various waste recycling technologies and practices in sugar industries of Pakistan. The application of EM technology and Biogas technology has proved very successful in reusing the sugar industry wastewater and mud, which otherwise were going waste.