• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.486-495
• /
• 2017

The wide use of chairside CAD/CAM restorations has increased the diversity of the restorative material. For the practitioner, the selection of the appropriate material is difficult amongst the variety offered by the market. Information on the characteristics of the products can be difficult to assess due to the lack of up-to-date classification and the lack of reliability of manufacturer's advertising. The purpose of this article is to structure the data on restorative materials provided by various sources in order for the practitioner to choose the product most suited to the clinical situation. The objective is to classify chairside CAD/CAM materials and to define their characteristics and indications.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.122-128
• /
• 2007

In this paper, a method of station keeping strategy using relative orbital motion and numerical optimization technique is presented for geostationary satellite. Relative position vector with respect to an ideal geostationary orbit is generated using high precision orbit propagation, and compressed in terms of polynomial and trigonometric function. Then, this relative orbit model is combined with optimization scheme to propose a very efficient and flexible method of station keeping planning. Proper selection of objective and constraint functions for optimization can yield a variety of station keeping methods improved over the classical ones. Nonlinear simulation results have been shown to support such concept.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.389-394
• /
• 1996

The product-user interface for consumer electronic products became complex due to the increased variety of functions corresponding to consumer needs. In this study, three types fo design improvement of the menu interface for a video cassette recorder is studied. Three modifications to an existing menu interface was designed using the semantic, the syntactic and the lexical design factors. A series of the validation experiments was performed to test the effect of the three types of task modifications. The results showed that performance time, number of errors and learning effect were improved for all task modification. It also showed that the performance improvement effect of the semantic factors was 8.8%, that of the syntactic factors was 5.9% and that of the lexical factors was 5.6% respectively. It was found out that the performance improvement effect of the semantic design factors were relatively more significant than the syntactic and the lexical design factors.

• International Journal of Costume and Fashion
• /
• v.10 no.2
• /
• pp.1-13
• /
• 2010

The purpose of this study is to investigate the behavioral complexities frequently arising in married couples with respect to clothing choices. Symbolic interaction theory was used to understand how spousal influence affects clothing selection after marriage. A convenient sample of nine married couples was interviewed for the data collection. A content analysis revealed how marriage affected their clothing choices, types of communication conveyed with their spouses about clothes and shopping patterns. The primary result indicated that individuals take their spouses' clothing preferences into consideration. Couples exhibited varying frequencies of communication about clothing choices and developed a variety of shopping patterns. As a result of the findings from this study, future research directions are suggested.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.191-197
• /
• 2007

Inclined surface milling in the mould and die industries is one of the most commonly needed cutting process. For the variety and complexity of cutting characteristics in various cutting condition, it is difficult to select a optimal tool path orientation. Especially, when the cutting process becomes unstable, it induces self-exited vibrations, a frequent cause of poor tool life, rough surface finish, damage to the workpiece and the machine tool itself, and excessive down time. The comparative results through FFT analysis in this study provide a guideline for the selection tool path orientation.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.2
• /
• pp.65-79
• /
• 1994

A biomechanical model of lower extremity in seated postures was developed to assess muscular activities of lower extremity involved in a variety of foot pedal operations. The model incorporated four rigid body segments with the twenty-four muscles to represent lower extremity. This study deals with quasi-static movement to investigate dymanic movement effect in seated foot operation. It is found that optimization method which has been used for modeling the articulated body segments does not predict the forces generated from biarticular muscles and antagonistic muscles reasonably. So, the revised nonlinear optimization scheme was employed to consider the synergistic effects of biarticular muscles and the antagonistic muscle effects from the stabilization of the joint. For the model validation, three male subjects performen the experiments in which EMG activities of the nine lower extremity muscles were measured. Predicted muscle forces were compared with the corresponding EMG amplitudes and it showed no statistical difference. For the selection of optimal seated posture, a physiological meaningful criterion for muscular load sharing developed.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.91-97
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• Archives of Reconstructive Microsurgery
• /
• v.23 no.2
• /
• pp.45-50
• /
• 2014

Palmar soft tissue defects are best reconstructed using a replacement flap of proper size with adequate soft tissue stability for mechanical resistance as well as with protective sensation. Reconstructive approaches are dictated by injury mechanism, defect size and location, and the status of the wound bed and tendino-skeletal structure. While uninjured portions of the hand can be used as a source for local flaps, the use of free flaps allows for maximal access for selection of the most ideal replacement tissue for the defect to be restored as close to the initial state as possible. Here, we review the garden variety of free flaps used in reconstruction of palmar soft tissue defects.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.32-34
• /
• 2007

The X-ray projection system has long been used for steel-tube inspection and weld monitoring. The thickness of tubes and welded areas is based on the evaluation of radiographic shadow projections. The traditional tangential measurement estimates the distance of border lines of the projected wall shadows of a tube onto a radiographic image detector. The detected image in which although there is a variety of noise may be sectioned into several partitions according to its specific blocks. Imaging noise originates from most of elements of the system, such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc. The tangential projection incorrectness and noise influence on imaging quality. In this paper we first sectionalize the X-ray image on the basis of vertical contrast difference. And next functional and statistic analysis are carried on at each region. Geometrical distance and unsharpness of the edge caused by visual evaluation uncertainties are also discussed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.195-208
• /
• 1990

Flexible Manufacturing System(FMS) is an integrated, computer controlled complex of automated material handling devices and numerically controlled machine tools that can simultaneously process medium-sized volumes of a variety of part types. This paper discusses planning problems that can be solved for efficient use of an FMS and present an integrated decision support system for FMS production planning and scheduling problems. FMSDS(Flexible Manufacturing Systems Decision Support System) consists of data handling modules, part selection module, loading module, load adjusting module, scheduling module and simulation module etc. This paper presents the solution methodology of each subproblems and integrated interfaces between subproblems using hierarchical approaches and loop controls considering the relationships between subproblems. A case study by this model is presented.