• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.54-58
• /
• 2007

A real-time frame-layer rate control algorithm with a token bucket traffic shaper is proposed for distortion variation minimization. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. The proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performances than the existing rate control method.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.58-65
• /
• 1995

The possibilities of the estimation of the moisture content(MC) for sitka-spruce (Picea sitchensis Carr.) by measuring density have been investigated. The method is based on the relationships between the wood density and moisture content of wood expressed by Equations (8)~(9). The purpose of this study is examining the estimation of the moisture content of wood by density and the variation of moisture content with annual ring width of wood. The following conclusions were obtained; 1. This method is very convenience because of the average moisture content of wood can be obtained by a simple estimation. This estimation can be made from the easy measurement of the weight and volume of wood. 2. Coefficient of determination between the experimental MCs and theoretical MCs which is calculated by the oven-dry densities of each specimens and Equations (8), (9) is 0.98. This Correlation is very remarkable. Therefore the model Equations on the estimation of moisture content by wood density was available. 3. Relationship between experimental MCs and theoretical MCs which is estimated by average oven-dry density of total specimens showed positive correlation(Fig.2). But from the Fig.4. we can concluded that the number of specimens is two groups. This phenomenon is considered that the variation of MC by the annual ring width from the specimens' observations. Consequently, the MCs of wood by density, is likely to be successful method. can be estimate using by the average oven-dry densities divided with the annual ring widths of wood.

• 한국초지조사료학회지
• /
• 제8권2호
• /
• pp.68-76
• /
• 1988

The variation of rumination response in steers fed a same amount of orcharograss hay was investigated. With three steers (6, 12, 24 months) of the Japanese Black Breed, rumination behaviour was measured continuously during a 5 days period by masseter EMG telemetry system. The results are summarized as follows: 1. The average daily ruminatio time of respective animals were 438,447 and 433 min. with small daily variation both within and among animal. But the rumination time per DM kg of hay consumed varied from 66 to 138 min., and calf spent longer than older calf. 2. Actural chewing time showed small variation, and percentage of actural chewing time spent in rumination time was from 88 to 93% on individual average. 3. The daily number of chewing in rumination was approximately 25,000 to 30,000 with large individual differences. The chews per DM kg intake varied from 3,800 to 9,600, and calf chewed more than older calf. 4. The average rate of chewing per 100 sec. (chewing speed), there was a large difference between animals I.e. 104, 114, 131 respectively, but very little variance between days in individual. 5. No relation between day to day variations in eating time and rumination behavior, but significantly positive correlation was observed in the relation among rumination time, chewing time, No. of boluses and No. of chews. 6. Active time of day in rumination altered considerably day to day, but variation in the amount of rumination per day as expressed by the rumination time was relatively small.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권3호
• /
• pp.63-71
• /
• 2003

형산강 유역의 일별 하천유량과 오염부하량을 산정하기 위한 유역유출모형(강우-유출모형)인 Tank 모델을 구축하여 영일만으로 유입하는 오염부하량의 계절별 변동특성에 대해 검토하였다. 산정된 영일만으로 유입되는 형산강의 연평균 하천유량은 878.34×10/sup 6/㎥/year로 형산강 유역면적내 연평균 총강우량의 약 73%로 나타났다. 영일만내 유입되는 연평균 오염부하량은 각각 15.11 ton-COD/year, 23.24 ton-SS/year, 10.65 ton-TN/year, 0.54 ton-Tp/year로 산정되었다 또한 계절별 변동특성으로 하천유량이 증가하는 하계 6~7월과 춘계 10월에 유입오염부하량도 증가하는 경향을 보였다. 영일만내로 유입하는 주된 오염부하원은 형산강 하구인근에 위치한 포항시와 포항공단인 것으로 밝혀졌다. 따라서 영일만의 효율적인 수질관리를 위해서는 오염부하원으로부터의 오염부하량 저감대책수립이 요구된다.

• International Journal of Advanced Culture Technology
• /
• 제8권4호
• /
• pp.294-298
• /
• 2020

We was constructed of the spread movement with tremor layer point by the tractile-dot structure that was analyzed the squirm quake forms of the perception movement on the atom liquid. Algorithm of squirm quake forms was used to move the spread tremor on the atom state. To detect the tiny signal, we compared the association average value of the squirm quake form on the atom state. Their subject were issued the valuation standard and perception movement for basic atom condition by the spread tremor. We take to detect the tiny scores of average during perception movement side from the spread tremor that magnetic condition get to a variation of the Ma-αAVG and Ma-αMAX-MIN with 6.25±0.35 units, that electric condition get to a variation for the El-αAVG and El-αMAX-MIN with 5.68±0.42 units. The spread tremor was to investigate the capacity of the tremor form, to uptake a spread data of spread tremor level on the CCPL that was denoted the calm-classification form by the spread perception level system. As the squirm quake forms was demanded by the spread tremor signal, max-average values of perception movement were checked the spread position for association average data. We make mention of squirm quake forms for a signal association and a quake data signal of relation system.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.465-471
• /
• 1999

The concentration of air pollution in a large city such as Pusan has been increased every years due to the increase on fuel consumption at factories and by vehicles as well as the gravitation of the population. In this study, we have analyzed $NO_2$ concentration data and various data of meteorological factors during 1994-1997 to investigate the characteristics of $NO_2$ concentration and how the high $NO_2$ concentration is generated under the meterological condition. According to the study, $NO_2$ peak concentration at most sites occured about 1h later after the rush hour. In the characteristics of emissions in sites, sinpyeong-dong was highly contributed to point source while the other sites were highly contributed to line source. The high $NO_2$ concentration had high generation probability when temperature contained typical seasonal characteristics and wind speed was low. Using the relationship between meteorological factors and the daily average $NO_2$ concentration, correlation analysis was practiced. the seasonal variation of the daily average $NO_2$ concentration was correlated with air temperature, solar radiation and wind speed, but the correlation coefficient between meteorological factors and the daily average $NO_2$ concentration was not so much high. Thus we have known that the daily average $NO_2$ concentration is partially explained by meteorological factors.

• 한국농공학회논문집
• /
• 제61권1호
• /
• pp.131-144
• /
• 2019

The purpose of study was to determine the hygrophyte index of each plant(HIP) considering the moisture environment condition (MEC) of the native plants on the downstream slope of the fill dam and evaluate its applicability which to develop a method to search for leaks and saturated zones of the fill dam for status evaluation of precision safety diagnosis. The HIP was weighted average and consisted of 19 ranks. The weighted average was calculated according to the following three procedures: First, the linear assumption was made according to the actual habitat environmental conditions, the second one was weighted to 10% of the optimal habitat condition, and finally the average value of the distribution range values. The Hygrophyte index of vegetation at each plot (HIV) was obtained from the Sinheung reservoir (Yesan-gun, Chungcheongnam-do) using the results of vegetation survey of the Sinheung reservoir with precision safety diagnosis and suggested the use of the hygrophyte index of the cultivated vegetation. The average HIP range of plant species that emerged in 50 survey sites on the downstream slope of the Sinheung reservoir is 2.99 to 3.56. The coefficient of variation showed a large difference depending on the appearance of the leakage indicator plant(LIP) species. The range of HIV is 2.80 to 4.26, the mean value is 3.37, standard deviation is 0.37 and the coefficient of variation is 9.7%. As a result, the value of the coefficient of variation showed a large difference depending on the appearance of the plant species.

• 환경위생공학
• /
• 제24권1호
• /
• pp.47-55
• /
• 2009

Indoor air Quality in public facility same as bus terminal and subway station is very important for civil health. The purpose of this study was to investigate the concentration and distribution of PM10 and falling microorganism at the 5 subway stations and bus terminals from Summer 2003 to Summer 2005 in Kyunggi Province. The results were as follows. 1. The highest concentration of PM10 was $187ug/m^3$ at Bucheon Bus Terminal in 2005 while the lowest concentration of PM10 was $78ug/m^3$ at Suwon Bus Terminal in 2003. The year variation of PM10 concentration at the bus terminals in Kyunggi Province was in order of 2005 > 2004 > 2003. The average concentration of PM10 at the five Bus Terminal was $127ug/m^3$. 2. The highest concentration of PM10 was $225ug/m^3$ at Euijungbu Station l in 2004 while the lowest concentration of PM10 was $115ug/m^3$ at Suwon Station in 2003. The year variation of PM10 at the subway stations in Kyunggi Province was in order of 2004 > 2005 > 2003. The average concentration of PM10 at the five subway stations was $164ug/m^3$. 3. The average amount of falling microoganism at the five bus terminal in Kyunggi Provinc was 201CFU/plate. The minimum is 124 CFU/plate at Seongnam Bus Terminal in 2004 while the maximum is 268CFU/plate at Euijungbu Bus Terminal in summer 2005. The higher concentration of PM10 was 206CFU/plate in 2004 than 199CFU/plate in 2003 and 2005. 4. The minimum is 107CFU/plate at Anyang station in 2003 while the maximum was 263CFU/plate at Euijungbu station in 2003. The average amount of falling microoganism at the five subway stations in Kyunggi Province was 179 CFU/plate. The year variation of falling microorganism at the subway stations in Kyunggi Province was in order of 2004 > 2005 > 2003.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권3호
• /
• pp.1851-1863
• /
• 2013

Diurnal variation of particulate polycyclic aromatic hydrocarbons (PAHs) was investigated by collecting PM10 at three different sampling altitudes using high buildings in the city center of Chiang-Mai, Thailand, during the relatively cold period in late February 2008. At site-1 (12 m above ground level), B[a]P concentrations ranged from 30.3-1,673 pg $m^{-3}$ with an average of $506{\pm}477\;pg\;m^{-3}$ contributing on average, $8.09{\pm}8.69%$ to ${\Sigma}PAHs$. Ind and B[b]F concentrations varied from 54.6 to 4,579 pg $m^{-3}$ and from 80.7 to 2,292 pg $m^{-3}$ with the highest average of $1,187{\pm}1,058\;pg\;m^{-3}$ and $963{\pm}656\;pg\;m^{-3}$, contributing on average, $19.0{\pm}19.3%$ and $15.4{\pm}12.0%$ to ${\Sigma}PAHs$, respectively. Morning maxima were predominantly detected in all observatory sites, which can be described by typical diurnal variations of traffic flow in Chiang-Mai City, showing a morning peak between 6 AM. and 9 AM. Despite the fact that most monitoring sites might be subjected to specific-site impacts, it could be seen that PAH profiles in Site-1 and Site-2 were astonishingly homogeneous. The lack of differences suggests that the source signatures of several PAHs become less distinct possibly due to the impacts of traffic and cooking emissions from ground level.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.493-502
• /
• 2004

In this study, nano-sized indium oxide powder with the average particle size below 100 nm is fab-ricated from the indium chloride solution by the spray pyrolysis process. The effects of the reaction temperature, the concentration of raw material solution and the inlet speed of solution on the properties of powder were studied. As the reaction temperature increased from 850 to $1000^{\circ}C$, the average particle size of produced powder increased from 30 to 100 nm, and microstructure became more solid, the particle size distribution was more irregular, the intensity of a XRD peak increased and specific surface area decreased. As the indium concentration of the raw material solution increased from 40 to 350 g/l, the average particle size of the powder gradually increased from 20 to 60 nm, yet the particle size distribution appeared more irregular, the intensity of a XRD peak increased and spe-cific surface area decreased. As the inlet speed of solution increased from 2 to 5 cc/min., the average particle size of the powder decreased and the particle size distribution became more homogeneous. In case of the inlet speed of 10 cc/min, the average particle size was larger and the particle size distribution was much irregular compared with the inlet speed of 5 cc/min. As the inlet speed of solution was 50 cc/min, the average particle size was smaller and microstructure of the powder was less solid compared with the inlet speed of 10 cc/min. The intensity of a XRD peak and the variation of specific area of the powder had the same tendency with the variation of the average par-ticle size.