• 제목/요약/키워드: variable weight

검색결과 827건 처리시간 0.035초

3MW급 해상풍력 발전시스템 개발 (3MW Class Offshore Wind Turbine Development)

  • 주완돈;이정훈;김정일;정석용;신영호;박종포
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.491-494
    • /
    • 2009
  • This paper introduces the design concepts and characteristics of WinDS3000$^{TM}$ which is a trade mark of Doosan's 3MW offshore/onshore wind turbine. WinDS3000$^{TM}$ has been designed in consideration of high RAMS (Reliability, Availability, Maintainability and Serviceability) and cost effectiveness for the TC Ia condition in GL guideline. An integrated drive train design with an innovative three-stage gearbox has been introduced to minimize nacelle weight of the wind turbine and to enhance a high reliability for transmission. A permanent magnet generator with full converter system has been introduced to get higher efficiency in part load operation, and grid friendliness use of 50 Hz and 60 Hz grid. A pitch regulated variable speed power control with individual pitch system has been introduced to regulate rotor torque while generator reaction torque can be adjusted almost instantaneously by the associated power electronics. An individual pitch control system has been introduced to reduce fatigue loads of blade and system. The wind turbine has been also equipped with condition monitoring and diagnostic systems in order to meet maintainability requirements. And internal maintenance crane in nacelle has been developed. As a result, the maintenance cost was dramatically reduced and maintenance convenience also enhanced in offshore condition.

  • PDF

가변 피치형 수평축 풍력 터빈의 공력 최적설계 및 피치제어 성능 연구 (Optimal Aerodynamic Design and Performance Analysis for Pitch-Controlled HAWT)

  • 유기완
    • 한국항공우주학회지
    • /
    • 제35권10호
    • /
    • pp.891-898
    • /
    • 2007
  • 피치 제어형 수평축 풍력터빈에 대한 공력최적 설계 형상과 피치 변화에 따른 공력 성능 특성을 수치적으로 계산하였다. 수치적 방법은 날개 요소이론을 적용하였으며, Prandtl의 팁 손실 효과, 에어포일의 분포 효과, 후류의 회전 효과 등을 고려하였다. 블레이드 설계에는 총 6개의 서로 다른 에어포일을 사용하였으며, 구조적 강성을 갖기 위해서 허브 측에는 최대 40% 두께비의 에어포일을 분포시켰다. 최적 설계에서 얻어진 비선형 코드 길이는 제작성과 무게 등을 고려하여 선형화 시켰고, 선형화에 따른 공력성능 변화는 무시할만하다는 결과를 얻어내었다. 피치각 변화에 따른 동력성능, 추력성능, 토크 성능 곡선을 비교한 결과 $3^{\circ}$의 피치각 변화에도 민감한 공력 값의 변동이 생김을 알 수 있었고, 정밀한 피치 제어를 위한 각도 제어는 증분이 $3^{\circ}$보다 작은 값으로 피치 제어 알고리즘과 피치 구동 장치가 필요함을 알 수 있었다. 또한 최대 토크는 설계속도비보다 작은 속도비에서 발생되는 결과를 보여주었다.

Performance Improvement of Pneumatic Artificial Muscle Manipulators Using Magneto-Rheological Brake

  • Ahn, Kyoung-Kwan;Cong Thanh, TU Diep;Ahn, Young-Kong
    • Journal of Mechanical Science and Technology
    • /
    • 제19권3호
    • /
    • pp.778-791
    • /
    • 2005
  • A novel pneumatic artificial muscle actuator (PAM actuator), which has achieved increased popularity to provide the advantages such as high strength and high power/weight ratio, low cost, compactness, ease of maintenance, cleanliness, readily available and cheap power source, inherent safety and mobility assistance to humans performing tasks, has been regarded during the recent decades as an interesting alternative to hydraulic and electric actuators. However, some limitations still exist, such as the air compressibility and the lack of damping ability of the actuator bring the dynamic delay of the pressure response and cause the oscillatory motion. Then it is not easy to realize the performance of transient response of pneumatic artificial muscle manipulator (PAM manipulator) due to the changes in the external inertia load with high speed. In order to realize satisfactory control performance, a variable damper-Magneto­Rheological Brake (MRB), is equipped to the joint of the manipulator. Superb mixture of conventional PID controller and a phase plane switching control method brings us a novel controller. This proposed controller is appropriate for a kind of plants with nonlinearity, uncertainties and disturbances. The experiments were carried out in practical PAM manipulator and the effectiveness of the proposed control algorithm was demonstrated through experiments, which had proved that the stability of the manipulator can be improved greatly in a high gain control by using MRB with phase plane switching control method and without regard for the changes of external inertia loads.

Selection and Classification of Bacterial Strains Using Standardization and Cluster Analysis

  • Lee, Sang Moo;Kim, Kyoung Hoon;Kim, Eun Joong
    • Journal of Animal Science and Technology
    • /
    • 제54권6호
    • /
    • pp.463-469
    • /
    • 2012
  • This study utilized a standardization and cluster analysis technique for the selection and classification of beneficial bacteria. A set of synthetic data consisting of 100 individual variables with three characteristics was created for analysis. The three characteristics assigned to each independent variable were designated to have different numeric scales, averages, and standard deviations. The variables were bacterial isolates at random, and the three characteristics were fermentation products, including cell yield, antioxidant activity of culture, and enzyme production. A standardization method utilizing a standard normal distribution equation to record fermentation yields of each isolate was employed to weight their different numeric scales and deviations. Following transformation, the data set was analyzed by cluster analysis. The Manhattan method for dissimilarity matrix construction along with complete linkage technique, an agglomerative method for hierarchical cluster analysis, was employed using statistical computing program R. A total of 100 isolates were classified into groups A, B, and C. In a comparison of the characteristics of each group, all characteristics in groups A and C were higher than those of group B. Isolates displaying higher cell yield were classified as group A, whereas those isolates showing high antioxidant activity and enzyme production were assigned to group C. The results of the cluster analysis can be useful for the classification of numerous isolates and the preparation of an isolation pool using numerical or statistical tools. The present study suggests that a simple technique can be applied to screen and select beneficial microbes using the freely downloadable statistical computing program R.

동맥경화도와 생리학적 변수들 간의 상관관계 (Correlation between Arterial Stiffness and Physiological Parameters)

  • 신재욱;석성자;이길현;최석철;현경예
    • 보건의료산업학회지
    • /
    • 제7권3호
    • /
    • pp.71-82
    • /
    • 2013
  • Arterial stiffness(AS) is an important pathologic state of vascular injury. This study was carried out to elucidate the effect of physiological variables on brachial-ankle pulse wave velocity(BAPWV), index of AS. Four hundred adults(volunteers) participated in this study. Body indices, biochemical, cardiac and inflammatory markers, and right(Rt)- and left(Lt)-BAPWV were measured. Body mass index(BMI), Rt- and Lt-BAPWV, glucose, triglyceride, alkaline phosphatase(ALP), gamma-glutamyl transferase(GGT), creatinine, uric acid, troponin-I(TNI), NT-proBNP and high sensitivity C-reactive protein(hs-CRP) levels were higher than the reference value of each variable. Rt- and Lt-BAPWV were directly correlated with age, body weight, BMI, glucose, ketone, aspartate aminotransferase, alanine aminotransferase, ALP, GGT, total cholesterol, low density lipoprotein, lipoprotein(a), apolipoprotein-B, blood urea nitrogen, heart rate, TNI, creatine kinase, CK-MB, lactic dehydrogenase, myoglobin, hs-CRP, lipase, reumatoid factor, fibrinogen and D-dimer (P<0.05, P<0.01, P<0.001 or P<0.000, respectively), but inversely associated with total bilirubin, uric acid, apolipoprotein-A1 and GFR (P<0.05). These observations suggest that a variety of physiological variables may influence BAPWV, resulting in increased risk or prevention of cardiovascular and/or cerebrovascular attacks. Therefore, physiological variables affecting BAPWV should be regularly controlled.

Lamb Production Costs: Analyses of Composition and Elasticities Analysis of Lamb Production Costs

  • Raineri, C.;Stivari, T.S.S.;Gameiro, A.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권8호
    • /
    • pp.1209-1215
    • /
    • 2015
  • Since lamb is a commodity, producers cannot control the price of the product they sell. Therefore, managing production costs is a necessity. We explored the study of elasticities as a tool for basing decision-making in sheep production, and aimed at investigating the composition and elasticities of lamb production costs, and their influence on the performance of the activity. A representative sheep production farm, designed in a panel meeting, was the base for calculation of lamb production cost. We then performed studies of: i) costs composition, and ii) cost elasticities for prices of inputs and for zootechnical indicators. Variable costs represented 64.15% of total cost, while 21.66% were represented by operational fixed costs, and 14.19% by the income of the factors. As for elasticities to input prices, the opportunity cost of land was the item to which production cost was more sensitive: a 1% increase in its price would cause a 0.2666% increase in lamb cost. Meanwhile, the impact of increasing any technical indicator was significantly higher than the impact of rising input prices. A 1% increase in weight at slaughter, for example, would reduce total cost in 0.91%. The greatest obstacle to economic viability of sheep production under the observed conditions is low technical efficiency. Increased production costs are more related to deficient zootechnical indexes than to high expenses.

성인 여성의 비만위험도와 TV 시청시간 및 신체활동 수준과의 관계 (Association of Obesity with Television Watching and Physical Activity in Adult Female)

  • 윤군애
    • Journal of Nutrition and Health
    • /
    • 제36권7호
    • /
    • pp.769-776
    • /
    • 2003
  • This study has analyzed the association of physical activity and television watching time with obesity in 30-50 aged women from middle income town in Busan city area. Data were obtained using a questionnaire, including information about physical activity, TV watching time and health habit; social data regarding educational level and monthly income; family history of chronic condition. Height and weight were measured. Outcome variable was obesity, defined as a body mass index 25 kg/m$^2$ or greater. Odds ratios (OR) for obesity were estimated by multivariate logistic regression, and interpreted as a relative risk of obesity. The prevalence of obesity was 11.8%. The mean BMI of obese women was 26.9 kg/m$^2$. The OR of obesity was higher in subject of 40s than 30s. Subjects who had higher educational level presented lower OR than those of elementary or middle school education. Family income was not associated with obesity. Women having a family history of chronic condition had higher risk of obesity than those who did not have it. The OR was lower in active people at work (OR = 0.51; 95% CI = 0.26 - 0.98) than in inactive ones, and the ORs associated with regular exercise or activity at leisure time were not statistically different. However, subjects watching TV $\geq$ 3.5 hr/day showed higher OR (OR = 2.34; 95% CI = 1.16 - 4.74), compared with those watching TV $\geq$ 1.5 hr/day. Association of the joint classification of physical activity variables with obesity was estimated. The highest relative risk of 5.99 was in women in physically inactive at work and high category of TV watching ($\geq$ 3.5 hr/day). Even in women in active at work, the watching TV $\geq$ 3.5 hr/day made them have the high OR (OR = 2.44; 95% CI = 1.03 - 5.77). And at each time level of TV watching, the increasing activity level at work was associated with lower OR for obesity. These findings suggest that both TV watching time and physical activity at work were related to obesity in adult female, each with independent effects on obesity. TV watching time seems to be a significant factor that could partly evaluate the energy expenditure.

Effects of Heart Fatty Acid-binding Protein Genotype on Intramuscular Fat Content in Duroc Pigs Selected for Meat Production and Meat Quality Traits

  • Uemoto, Yoshinobu;Suzuki, Keiichi;Kobayashi, Eiji;Sato, Syushi;Shibata, Tomoya;Kadowaki, Hiroshi;Nishida, Akira
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권5호
    • /
    • pp.622-626
    • /
    • 2007
  • Using multi-trait animal model BLUP, selection was conducted over seven generations for growth rate (DG), real-time ultrasound loin-eye muscle area (LEA), backfat thickness (BF), and intramuscular fat content (IMF) to develop a new line of purebred Duroc pigs with enhanced meat production and meat quality. This study was intended to investigate the relationship between restriction fragment length polymorphism (RFLP) of a heart fatty acid-binding protein (H-FABP) gene and intramuscular fat content (IMF) of this Duroc purebred population. The present experiment examined the RFLP of 499 slaughtered pigs. The DNA was separated from the blood or ear tissue of the pigs, which were slaughtered at 105 kg of body weight. Intramuscular fat content of the longissimus muscle was measured using chemical analysis. A significant difference was detected in the breeding value of IMF among the H-FABP PCR RFLP genotypes. The AA genotype has a significantly larger positive effect on the IMF breeding value than do the Aa and aa genotypes for the MspI RFLP. In addition, the DD genotype has a significantly greater positive effect on IMF breeding value than the Dd and dd genotypes for the HaeIII RFLP. For the HinfI RFLP, the hh genotype has a significantly larger positive effect on IMF breeding value than the HH genotype. Multiple regression analysis was performed using the IMF breeding values as the dependent variable and the three H-FABP genotypes as independent variables. Results revealed that the contribution of the genotypes to variation in IMF breeding values was approximately 40%. These results demonstrated that H-FABP RFLPs affect IMF in this Duroc population.

Effect of Atrial Natriuretic Peptide on the Proliferation and Activity of Osteoblastic Cells

  • Lee, Jong-Ryeul;Ko, Seon-Yle;Kim, Jung-Keun;Kim, Se-Won
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제4권4호
    • /
    • pp.283-289
    • /
    • 2000
  • Natriuretic peptides comprise a family of three structurally related peptides; atrial natriuretic peptide (ANP), brain natriuretic peptide (BNP), and C-type natriuretic peptide (CNP). The present study was performed to investigate the effect of ANP on the proliferation and activity of ROS17/2.8 and HOS cells which are well-characterized osteoblastic cell lines. ANP dose-dependently decreased the number of ROS17/2.8 and HOS cells after 48-hour treatment. ANP generally increased the alkaline phosphatase activity of ROS17/2.8 and HOS cells after 48 hr treatment, regardless of the fact that basal activity of alkaline phosphatase was much lower in HOS cells compared to that of ROS17/1.8 cells. ANP increased the NBT reduction by ROS17/2.8 and HOS cells. ANP showed the variable but no significant effect on the nitric oxide production by ROS17/2.8 and HOS cells. ROS17/2.8 and HOS cells produced and secreted gelatinase into culture medium, and this enzyme was thought to be the gelatinase A type with the molecular weight determination. The gelatinase activity produced by ROS17/2.8 cells was increased by the treatment of ANP. However, the enzyme activity was not affected by ANP treatment in the HOS cell culture. In summary, ANP decreased the proliferation and increased the alkaline phosphatase activity and NBT reduction of osteoblasts. These results indicate that ANP is one of the important regulators of bone metabolism.

  • PDF

수술실 근무자의 업무수행 관련 근골격계 부담정도와 통증에 대한 연구 (A Study on Musculoskeletal Symptom and Pain related to Working Posture of Operation-Room Workers.)

  • 김지연;정애화
    • 한국산학기술학회논문지
    • /
    • 제11권8호
    • /
    • pp.2906-2916
    • /
    • 2010
  • 목적 : 본 연구는 수술실 근무자들을 대상으로 작업 관련성 근골격계 부담정도와 통증에 대한 상태를 파악 하고자 실시하였다. 방법: 수술실 근무자 73명을 대상으로 설문조사와 동영상 촬영을 통하여 수술실 근무자의 작업 평가를 REBA 이용하여 인간공학적 작업분석을 실시하였다. 결과: REBA로 측정한 수술실 근로자들의 근골격계 부담정도와 근골격계 통증 정도는 상당히 높은 상태였으며 이것은 조치수준 2에 해당되며 '대상자에게 어떠한 조치가 필요하다'는 것을 의미한다. 또한 대상자 대부분이 주 3~4회 통증을 경험하고, 다리, 목, 어깨에서 심한 통증을 경험하는 것으로 조사되었다. 대상자의 일반적 특성과 통증간의 유의한 결과를 나타내는 변수로는 성별, 연령, 결혼상태, 체중, 과거직장 경험, 하루 평균 근무시간, 근무형태, 근무부서에서 유의한 관계가 있었다. 결론: 수술실 근로자는 작업과 관련하여 높은 근골격계 부담과 심한 근골격계 통증을 경험하고 있으며, 이로 인해 근골격계 질환의 가능성이 높은 것으로 나타났다.