• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.671-679
• /
• 2008

The near surface mounted (NSM) FRP strengthening method has been conventionally applied for strengthening the deteriorated concrete structures. The NSM strengthening method, however, has been issued with the problem of limitation of the cutting depth which is usually considered as concrete cover depth. This may be related with degradation of bonding performance in long-term service state. To improve the debonding problem, in this study, the Stirrup partial-cutting NSM (SCNSM) strengthening method using CFRP plate was newly developed. SCNSM strengthening method can be effectively applied to the deteriorated concrete structure without any troubles of insufficient cutting depth. To experimentally verify the structural behavior, the flexural test of the concrete beam by using the SCNSM strengthening method was conducted with the test variable as the strengthening length (32%, 48%, 70%, 80%, 96% of span length). In the result of the test, the NSM and SCNSM strengthened specimen showed similar structural behavior with load-deflection, mode of failure. Additionally, there was no apparent structural degradation by the stirrup partial-cutting. Consequently, it was evaluated that the SCNSM strengthening method can be useful for seriously damaged concrete structures that is hard to apply the conventional NSM strengthening method for increasing the structural capacity.

• Earthquakes and Structures
• /
• v.11 no.6
• /
• pp.1101-1121
• /
• 2016

Base isolation, one of the popular seismic protection approaches proven to be effective in practical applications, has been widely applied worldwide during the past few decades. As the techniques mature, it has been recognised that, the biggest issue faced in base isolation technique is the challenge of great base displacement demand, which leads to the potential of overturning of the structure, instability and permanent damage of the isolators. Meanwhile, drain, ventilation and regular maintenance at the base isolation level are quite difficult and rather time- and fund- consuming, especially in the highly populated areas. To address these challenges, a number of efforts have been dedicated to propose new isolation systems, including segmental building, additional storey isolation (ASI) and mid-storey isolation system, etc. However, such techniques have their own flaws, among which whipping effect is the most obvious one. Moreover, due to their inherent passive nature, all these techniques, including traditional base isolation system, show incapability to cope with the unpredictable and diverse nature of earthquakes. The solution for the aforementioned challenge is to develop an innovative vibration isolation system to realise variable structural stiffness to maximise the adaptability and controllability of the system. Recently, advances on the development of an adaptive magneto-rheological elastomer (MRE) vibration isolator has enlightened the development of adaptive base isolation systems due to its ability to alter stiffness by changing applied electrical current. In this study, an innovative semi-active storey isolation system inserting such novel MRE isolators between each floor is proposed. The stiffness of each level in the proposed isolation system can thus be changed according to characteristics of the MRE isolators. Non-dominated sorting genetic algorithm type II (NSGA-II) with dynamic crowding distance (DCD) is utilised for the optimisation of the parameters at isolation level in the system. Extensive comparative simulation studies have been conducted using 5-storey benchmark model to evaluate the performance of the proposed isolation system under different earthquake excitations. Simulation results compare the seismic responses of bare building, building with passive controlled MRE base isolation system, building with passive-controlled MRE storey isolation system and building with optimised storey isolation system.

• Composites Research
• /
• v.27 no.6
• /
• pp.248-253
• /
• 2014

In this study, tapered double cantilever beam specimens are designed with the variable of angle to investigate the fracture property at the bonded surface of adjoint structure. These specimens are made with four kinds of models as the length of 200 mm and the slanted angles of bonded surfaces on specimens of $6^{\circ}$, $8^{\circ}$, $10^{\circ}$ and $12^{\circ}$. By investigating experiment and analysis result of these specimens, the maximum loads are happened at 120 N, 137 N, 154 N and 171 N respectively in cases of the specimens with slanted angles of $6^{\circ}$, $8^{\circ}$, $10^{\circ}$ and $12^{\circ}$. As the analysis result approach the experimental value, it is confirmed to have no much difference with the values of experiment and analysis. It is thought that the material property can be investigated effectively on shear behavior of the material composed of aluminum foam bonded with adhesive through simulation instead of experiment by applying this study method.

• Journal of Distribution Science
• /
• v.14 no.12
• /
• pp.141-151
• /
• 2016

Purpose - Salesperson perceptions of the fairness and accuracy of a performance evaluation system were examined by managerial and professional employees of large organization. The performance evaluation process is central to many personal decisions such as attitude for job and sales performance. This study investigates the relationship between perceived evaluation fairness, job satisfaction, organizational commitment, and sales performance. The main purpose of this study is to develop and empirically test a comprehensive model of salespersons' perceived evaluation fairness on sales performance. For this purpose, we identified the structural relationship between perceived evaluation fairness, job satisfaction, organizational commitment, and sales performance. Also we investigate the mediating effects on job satisfaction and organizational commitment between perceived evaluation fairness and sales performance. Research design, data, and methodology - To empirically test these relationships, data were collected by in-depth interviews from sales managers and questionnaire surveys from 300 salespersons who work for sales area (credit card company, insurance company). Demographically, the overall sample was 91.6% female, 77.9% 30s and 40s, and 34% college educated, with an average tenure with their present organizations of 4 years. The questionnaire was composed of total 20 items dealing with frequency, quality, and consequences of perceived evaluation fairness, job satisfaction, organizational commitment, and sales performance. To test the research hypotheses, collected data analyzed by confirmatory factor analysis (CFA) and structure equation model (SEM). Results - Through extensive and rigorous literature review process of related literature(Perceived evaluation fairness, Job satisfaction, Organizational commitment, Sales performance), research model and research hypothesis was set up. This study obtains the following research results. First, perceived evaluation fairness has a positive effect on job satisfaction, whereas the effects of perceived evaluation fairness on organizational commitment and sales performance did not show statistically significant result. Second, job satisfaction and organizational commitment have complete mediating roles to the relationship between perceived evaluation fairness and organizational commitment, and relationship between perceived evaluation fairness and sales performance. Conclusions - Based on the results, salespersons' perceived evaluation fairness is one of the key independent variable for making high job satisfaction, organizational commitment, and sales performance. Finally the theoretical, managerial implication and research limitations are mentioned in the discussion.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.69-75
• /
• 2015

The concrete purpose of this study is to suggest actually a debt ratio to optimize the capital structure providing a kind of approach to estimate the proper debt ratio with an analytical model and empirical data in Korean shipping industry. The mathematical and analytical model is started from the first equation about ROE, return of net operating income on equity, with an independent variable, debt ratio. It is constructed with several parameters, ROS(return of operating income on sales), TAT(total assets turnover), and NFCL(net finance cost to liabilities). There could not be a certain relationship between debt ratio and ROS or TAT, while some correlation or causality between debt ratio and NFCL. In other words, most of firms with high debt ratio is likely to burden higher finance cost than others with low one. In this case, there is a linearity relationship between debt ratio and NFCL, so then the second equation considering this relation could be included within the analytical approach of this paper. To be short, if the criteria of adequate debt ratio has to be defined as some level of debt ratio to optimize ROE, the ROE could be illustrated as a quadratic equation to debt ratio from two equations. Next, this research estimated those parameters' numbers through the single regression method with data over 12 years of Korean shipping industry, and identified empirically the fact that optimal debt ratio would be approximately 400%. To conclude, if that industry's sales and operating incomes are stable, the debt ratio could be accepted until twice of 200% had forced in order to guarantee its financial safety in past time.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.213-230
• /
• 2020

Until now, various educational budgets, facilities, and programs have been put into school education, but the results have not been clearly evaluated. This study presents a model to analyze the effectiveness of educational support for students in high schools across the country. In this model, we first use EM cluster analysis to make clusters with similar inputs for school operation, and then calculate the relative efficiency in each cluster by using Network DEA analysis. The Network DEA analysis has a two-stage structure where the first stage uses six inputs in terms of school infrastructure to generate outputs such as the number of academic persistence. In the Network DEA analysis, the second stage uses 10 inputs in terms of school programs to generate outputs such as the number of enrollees to higher learning and the number of employees and per capita usage of library as the connection variable. Based on the efficiency analysis results, Tier analysis is performed by applying the Euclidean distance to select targets for benchmarking. In this study, we applied the model to analyze the efficiency of educational support by collecting data regarding student education support in general and vocational high school nationwide. The stepwise benchmarking method proposed that the target be selected for efficiency improvement step by step, taking into account inefficient school elements to complement the problem of the choice of benchmarking targets. Based on this study, it is expected that schools with low efficiency of educational support for students will be used as basic data for stepwise benchmarking for efficient operation of educational support for students.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.141-148
• /
• 2004

Recently, the demand of broadband communications such as high-speed internet, HDTV, 3D-HDTV and ATM backbone network has been increased drastically. For transmitting the broad-bandwidth data using wireless network, it is needed to use ka-band frequency. However, the use of this ka-band frequency is seriously affected to the received data performance by rain fading and atmospheric propagation loss at the Ka-band satellite communication link. So, we need adaptive MODEM to endure the degraded performance by channel environment. In this paper, we will present the structure and design of the 155Mbps adaptive Modem adaptively compensated against channel environment. In order to compensate the rain attenuation over the ka-band wireless channel link, the adaptive coding schemes with variable coding rates and the multiple modulation schemes such as trellis coded 8-PSK, QPSK, and BPSK are adopted. And the blind demodulation scheme is proposed to demodulate without Information of modulation mode at the multi-mode demodulator, and the fast phase ambiguity resolving scheme is proposed. The design and simulation results of adaptive Modem by SPW model are provided. This 155Mbps adaptive MODEM was designed and implemented by single ASIC chip with the $0.25\mu{m}$ CMOS standard cell technology and 950 thousand gates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.88-92
• /
• 2017

Owing to the depletion of fossil energy, wind power is attracting attention as a promising environmentally friendly alternative energy source, because it is abundant, renewable, and non-polluting. Wind turbines are divided into horizontal axis wind turbines (HAWTs) and vertical axis wind turbines (VAWTs) according to the direction of the rotating shaft. VAWTs have a low power generation efficiency, but are not affected by the wind direction and, thus, no yaw system is required and their structure is simple. Small VAWTs are attracting much attention because they can generate power even at low wind speeds. In this study, the output voltages and output currents of small VAWTs with gyromill type, hinge type and double door type blades capable of generating power even at low wind speeds were analyzed at variable wind speeds in the range of 1~11 m/s. At the maximum wind speed of 11m/s, the application of the double door type blades achieved 67% and 9% higher wind turbine output voltages than that of the gyromill type and hinge type blades, respectively. As regards the wind turbine output currents, the application of the double door type blades gave rise to 93% and 5% higher results than that of the gyromill type and hinge type blades, respectively. Through this study, the excellent output characteristics and commercialization potential of the double door type blades, which can generate power both at low and high wind speeds, were confirmed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.109-116
• /
• 1988

The strength and load of structure are varied with the Passage of time, and become a process of probability. It is possible to estimate the reliability from the relation between strength and load. Considering the safety, It is reasonable to estimate allowable stress from the safety factor based on the reliability. In this study, the method to estimate probability of fracture, which is index of reliability for rail subjeict to long term fatigue load were examined. In estimation of reliablity it is meaningless to evaluate numerical value especially this difficult case estimating parameter of random variable. To overcome this problem, conventional design method estimating relative reliability were proposed. In this study the Cornell method were examined. The uncertainity of random variale, ie coefficient of variation which is the index of variation of strength and load were considered. The effect of uncertainity related to probability of fracture, and safety factor based on reliability were examined. The results of this study are followed. The reliability of weld metal were influenced by variation of strength more then load, and base metal were influenced by load. It is confirmed that the allowable stress range calculating with factor of safety based an reliability is conservative.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.107-118
• /
• 2016

Purpose - Over 90% of Domestic logistics industry is small enterprise and they are experiencing growth stagnation due to price-based competition structure rather than constructing logistics service of high added value. In order to get over this situation and pursue the development of logistics industry, strengthening its competitiveness, through inter-enterprise cooperative network build-up, would be a key alternative. Therefore, in this study, an index for measuring inter-enterprise cooperation level of Joint logistics business will be developed as a typical collaborative business model in logistics industry. Moreover, a strengthening competitiveness method suggests a developmental step and a key management index to mature in logistics industry. Research Design, Data, Methodology - This study is an index development research for measuring inter-enterprise cooperation level of logistics industry. Such a level was measured by performing a survey by targeting enterprises that participated in Joint logistics business. The targeting enterprises are typical cooperative models in logistics industry. Measurement items were developed which were based on the presented items in existing research. Question items were composed of selection type questions as answering Yes/No. They measures implementation status of corporate activity and detailed activity items measuring qualitative level. Total samples were based on 116 enterprise samples including 90 logistics enterprises and 26 shippers. In addition, by evaluating the importance for Joint logistics business recognition with personnel working level, the weight of measuring variable was extracted. This study has built an assessment tools (LPCI) on Joint logistics business cooperation level in a situation where there are no previous studies on joint logistics business, this study is meaningful for other studies. Results - As a result of analyzing LPCI presented in this study, the score of logistics enterprise was represented as 59.9 points based on full score of 100 points and that of shippers as 47.2 points and cooperation level among enterprises participated in Joint logistics business was revealed to be very low. In particular, as a result of measuring the importance between logistics enterprise and shippers, the difference by each measurement standard was represented among those enterprises. This difference is considered to be a key factor that cooperative operational conformity between logistics enterprises and shippers is represented to be low. Conclusions - As most joint logistics business, being promoted at present, is sharing facility and information with joint logistics business, it is hard to find such a joint logistics business in reality based on cooperative business model in main cooperation agents. Therefore, competitiveness of logistics industry could be strengthened by promoting joint logistics business based on their mutual cooperation among enterprises. In other words, it is to secure sustainable competitiveness of joint logistics business together with creation of new market by inter-enterprise cooperation based on integration of basic logistics business.