• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.61-62
• /
• 2003

In this paper, the new higher order wall boundary conditions are proposed for solving the incompressible flows. The square driven cavity flows are simulated by using the variable order method of lines with the present wall boundary conditions. The variable order method of lines is constructed by the spatial discretization, i.e., the variable order proper convective scheme for convective terms and the modified differential quadrature method for diffusive terms, and time integration. The 2nd, 4th, and 6th order solutions are presented and these results show this higher order boundary conditions are very promising for the incompressible flow simulations.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.56-62
• /
• 1988

For shape description, a fast sequential method for polygonal approximation of chaincoded plane curves which are object boundaries is proposed. The proposed method performs polygonal approximation by use of the distance error from one point to a line, and its performance is enhanced by the smoothed slopes of lines. Furthermore, accumulated distance error and variable distance error threshold are proposed in order to consider and implement the visual characteristics of the human being.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1365-1373
• /
• 1999

In many countries including Korea, in order to transmit the more electric power, the higher transmission line voltage is inevitable. So, a rapid reclosing scheme is important for EHV/UHV transmission lines to ensure requirements for high reliability of main lines. A critical aspect of reclosing operation is the extinction of the secondary arc since it must extinguish before successful reclosure can occur. Therefore the accurate simulation techniques of arcing faults are of importance. And successful reclosing switching can be accomplished by adopting a proper method such as HSGS and hybrid scheme to reduce the secondary arc extinction time. First of all, this paper discusses a suggested arc model, which have time dependent resistance for primary arc and piecewise linear approximated arc model for secondary arc. And this simulation technique is applied to Korean 765 kV transmission lines. Also hybrid scheme is simulated and evaluated for the purpose of shortening dead time. For adaptive reclosing scheme, variable dead time control algorithm is suggested. Two kinds of algorithm are tested. One is max tracking algorithm and the other is rms tracking algorithm. According to simulation results, rms tracking has less errors than max tracking. Therefore rms tracking is applied to Korean 765 kV transmission lines with hybrid scheme.

• 한국전자파학회논문지
• /
• 제11권3호
• /
• pp.419-428
• /
• 2000

전송선 방정식을 이용하여 선형소자로 종단된 손실이 있는 다중 전송선에서의 누화(crosstalk)와 외부 전자파 에 의한 결합현상을 FDTD 기법으로 해석하였다. 표피효과에 의한 도체의 손실을 고려하여 해석할 경우 전송선 방정식에 컨벌루션 적분이 나타나게 되는데 컨벌루션 적분의 계산량을 줄이기 위해서 프로니(Prony) 방법을 이 용하였다. 또한 저항뿐만 아니라 인덕터나 커패시터로 종단된 다중 전송션을 해석하기 위해 상태변수 표현식 (state-variable formulation)을 이용하였다, TEM(Transverse Electromagnetic) 셀을 이용해서 다중 전송선에서의 누화와 외부 입사장에 의한 전자파 결합현상을 시간영역에서 측정하였고 이론적으로 구한 시율레이션 결과 와 비교하여 잘 일치함을 확인하였다. 또한 PCB와 같이 KSC 3340 TIV보다 상대적으로 손실이 큰 전송선 구조 인 경우 도체의 길이가 짧아도 손실을 포함해야 정확한 예측이 가능함을 확인하였고 저주파에서의 저항은 정상 시간 응답을 결정하고 고주파에서의 임피던스는 초기시간 응답을 결정함을 보였다.

• Journal of Mechanical Science and Technology
• /
• 제19권6호
• /
• pp.1280-1289
• /
• 2005

This paper presents the effects of corrosion environments of failure pressure model for buried pipelines on failure prediction by using a failure probability. The FORM (first order reliability method) is used in order to estimate the failure probability in the buried pipelines with corrosion defects. The effects of varying distribution types of random variables such as normal, lognormal and Weibull distributions on the failure probability of buried pipelines are systematically investigated. It is found that the failure probability for the MB31G model is larger than that for the B31G model. And the failure probability is estimated as the largest for the Weibull distribution and the smallest for the normal distribution. The effect of data scattering in corrosion environments on failure probability is also investigated and it is recognized that the scattering of wall thickness and yield strength of pipeline affects the failure probability significantly. The normalized margin is defined and estimated. Furthermore, the normalized margin is used to predict the failure probability using the fitting lines between failure probability and normalized margin.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.6-10
• /
• 2005

We have studied feasibility of single-layer second-order $high-T_c$ SQUID gradiometers in magnetocardiography. We have measured human cardiomagnetic signals using a short-baseline (5.8 mm) single-layer second-order YBCO gradiometer in partially shielded environments. The gradiometer has an overall size of $17.6\;mm{\times}6\;mm$ and contains three parallel-connected pickup coils which are directly coupled to a step-edge junction SQUID. The gradiometer showed an unshielded gradient noise of $0.84\;pT/cm^2/Hz^{1/2}$ at 1 Hz, which corresponds to an equivalent field noise of $280\;fT/Hz^{1/2}$. The balancing factor was $10^3$. Based on the same design rules as the short-baseline devices, we have studied fabrication of 30 mm-long baseline gradiometers. The devices had an overall size of $70.2\;mm{\times}10.6\;mm$ with each pickup coil of $10\;mm{\times}10\;mm$ in outer size. As Josephson elements we made two types of submicron bridges, which are variable thickness bridge (VTB) and constant thickness bridge (CTB), from $3\;{\mu}m-wide$ and 300 nm-thick YBCO lines with a thin layer of Au on top by using a focused ion beam (FIB) patterning method. VTB was 300 nm wide, 200 nm thick, 30 nm long with Au removed and CTB 100 nm wide and 30 nm long. In temperature-dependent critical currents, $I_c(T)$, VTB showed an nonmetallic barrier-type behavior and CTB an SNS behavior. We believe that those characteristics are ascribed to naturally formed grain boundaries crossing the bridges.

• 농촌계획
• /
• 제10권4호
• /
• pp.19-28
• /
• 2004

In order to revitalize rural areas fundamentally through multifunctional utilization of their resources, it should be necessary to prepare the rational development plan to the areal characteristics and conditions, and the first priority of its planning works should be given to spatial planning. The space syntax method, a powerful objective and quantitative analysis tool on the relationship between social and spatial characteristics, was introduced in this study. Five Comprehensive Rural Clustered Villages Development Areas in the Jeonnam-province were selected as case study areas, of which total area's and included villages' spatial variables were measured and analyzed. Rural villages analyzed in this study have the spatial structure badly systematized and much complicated, which results from low integration and deep spatial depth of them. And, by virtue of relatively many axial lines, there should be few differences between villages in terms of local integration, connectivity and control, while being significant difference in terms of global integration showing the whole areal characteristics. Intelligibility, the correlation coefficient between connectivity(local variable) and integration(global one) is low, which means that the spatial structure of the study areas is difficult for visitors to understand the area or village well. Spatial configuration analysis results in the case study areas showed that each development area has a unique spatial structure and is differentiated in terms of not only local spatial variables but also global spatial variables. Therefore, global and local characteristics should be considered in spatial analysis of development areas.

• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.290-300
• /
• 2009

연직 막체방파제에 대한 기존의 수치해석에서는 막체의 운동 중 발생하는 변동장력성분이 초기장력에 비하여 미미하다는 가정 하에 운동 중의 막체 장력을 초기장력으로 대체하는 선형해석을 수행하였다. 본 수치해 석에서는 막체장력의 비선형 변화를 한 주기 동안의 평균장력으로 대체하며 이 평균장력을 반복계산을 통하여 구해나가는 준 비선형 해석을 수행하였다. 상기 선형해석 결과와 비교하여 입사파 주기가 증가할수록 반사율은 증가하며 전달율은 감소하는 것으로 나타났다. 아울러, 본 준 비선형해석을 계류형태를 달리하는 두 구조물에 적용한 결과, 막체의 수평변위의 제어가 방파성능에 밀접한 효과가 있는 것으로 나타났다. 막체의 수평변위를 억제하기 위해서는 막체의 초기장력을 증가시키거나 막체의 중간부에 계류라인을 추가 결속시키는 방법들이 있으나 이를 위해서는 연직 하향 계류력을 지지하기 위한 대형 수면 부표의 설치가 요구된다.