• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.257-261
• /
• 2008

The Digital Radio Mondiale (DRM) system is a digital broadcasting standard designed for use in the LF, MF and HF bands of the broadcasting bands below 30 MHz. The system provides both superior audio quality and improved user services / operability compared with existing AM transmissions. In this paper, we propose a variable point Prime Factor FFT design method for Digital Radio Mondiale (DRM) system. Proposed method processes a various size IFFT/FFT of Robustness Mode on DRM standard efficiently by composing Radix-Prime Factor FFT Processing Unit of form similar to Radix-4 by insertion of a variable Prime Factor Twiddle Factor and Garbage data. So, we improved limitation that cannot process 112/176/256/288 FFT of each mode of DRM system with a existent Radix Processor and increase memory size and memory access time for IFFT/FFT processing by software processing in case of implementation with a existent high speed DSP.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.287-297
• /
• 2013

In this paper, we propose an efficient variable-length radix-8/4/2 FFT architecture for OFDM systems. The FFT processor is based on radix-8 FFT algorithm and also supports radix-4 or radix-2 FFT computation. We are using efficient "In-place" memory access method to maintain conflict-free data access and minimize memory size. Also we replace a very large lookup table with a twiddle factor generator which consumes less area then a ROM-based lookup table. The proposed FFT processor performs variable-length FFT including 64, 256, 512, 1024, 2048, 4096 and 8192 points which cover all the required FFT lengths used in 802.11a, 802.16a, DAB, DVB-T, VDSL and ADSL.

• Smart Structures and Systems
• /
• v.24 no.3
• /
• pp.361-377
• /
• 2019

The stiffness of shape memory alloy (SMA) spring while in actuation is represented by an empirical model that is derived from the logistic differential equation. This model correlates the stiffness to the alloy temperature and the functionality of SMA spring as active variable stiffness actuator (VSA) is analyzed based on factors that are the input conditions (activation current, duty cycle and excitation frequency) and operating conditions (pre-stress and mechanical connection). The model parameters are estimated by adopting the nonlinear least square method, henceforth, the model is validated experimentally. The average correlation factor of 0.95 between the model response and experimental results validates the proposed model. In furtherance, the justification is augmented from the comparison with existing stiffness models (logistic curve model and polynomial model). The important distinction from several observations regarding the comparison of the model prediction with the experimental states that it is more superior, flexible and adaptable than the existing. The nature of stiffness variation in the SMA spring is assessed also from the Dynamic Mechanical Thermal Analysis (DMTA), which as well proves the proposal. This model advances the ability to use SMA integrated mechanism for enhanced variable stiffness actuation. The investigation proves that the stiffness of SMA spring may be altered under controlled conditions.

• Research in Mathematical Education
• /
• v.13 no.3
• /
• pp.181-195
• /
• 2009

Students' approaches to mathematical problem solving vary greatly with each other. The main objective of the current study was to compare students' performance with different thinking styles (divergent vs. convergent) and working memory capacity upon mathematical problem solving. A sample of 150 high school girls, ages 15 to 16, was studied based on Hudson's test and Digit Span Backwards test as well as a math exam. The results indicated that the effect of thinking styles and working memory on students' performance in problem solving was significant. Moreover, students with divergent thinking style and high working memory capacity showed higher performance than ones with convergent thinking style. The implications of these results on math teaching and problem solving emphasizes that cognitive predictor variable (Convergent/Divergent) and working memory, in particular could be challenging and a rather distinctive factor for students.

• Korean Journal of Biological Psychiatry
• /
• v.16 no.4
• /
• pp.238-245
• /
• 2009

Objectives : Mild Alzheimer's disease(AD) is uncertain to be related to visuospatial working memory subsystem dysfunction. We used the self ordered pointing test(SOPT) to find the characteristics of visuospatial working memory in mild AD. Methods : We compared the visuospatial working memory abilities of 20 patients with mild AD and 20 normal elderly controls(NC) using SOPT, of which stimuli consisted of two stimuli types(A : abstract, C : concrete) and two stimuli numbers(8 and 12). Therefore, working memory was tested using C8, C12, A8, and A12 stimuli conditions in SOPT. Mixed-model ANOVA was conducted with the AD and NC groups as between-subjects factor, with stimuli types and stimuli numbers as the within-subjects factors and with SOPT error rates as the dependent variable. Results : The AD group showed higher error rates in SOPT than the NC group. The NC group showed low error rates in concrete stimuli than in abstract stimuli and in small stimuli numbers than in large stimuli numbers. And the AD group showed no differences between stimuli types or stimuli numbers. Conclusion : AD patients showed a poor performance in visuospatial working memory using concrete stimuli. The result suggests that there is a non-transformation from visual input to phonological working memory in AD. Patients with AD showed a poor performance although in small stimuli number condition of SOPT. It suggests that in AD, visuospatial working memory is not working well although in low central executive loads.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.127-135
• /
• 2009

Most traffic information that drivers receive while driving are stored in their short-term memory and disappear within a few seconds. Contemporary modeling approaches using a dummy variable can't fully explain this phenomenon. As such, this study proposes to use utility functions of real-time in-vehicle traffic safety information (IVTSI), analyzing its safety impacts based on empirical data from an on-site driving experiment at signalized intersection approach with a limited visibility. For this, a driving stability evaluation model is developed based on driver's driving speed choice, applying an ordered probit model. To estimate the specified utility functions, the model simultaneously accounts for various factors, such as traffic operation, geometry, road environment, and driver's characteristics. The results show three significant facts. First, a normal density function (exponential function) is appropriate to explain the utility of IVTSI proposed under study over time. Second, the IVTSI remains in driver's short-term memory for up to nearly 22 second after provision, decreasing over time. Three, IVTSI provision appears more important than the geometry factor but less than the traffic operation factor.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.8-13
• /
• 2023

High bandwidth memory a core technology of the future memory semiconductor industry, is attracting attention. Temporary bonding and debonding process technology, which plays an important role in high bandwidth memory process technology, is also being studied. In this process, total thickness variation is a major factor determining wafer performance. In this study, the reliability of the equipment measuring total thickness variation is identified, and the servo motor settling, and wafer total thickness variation measurement accuracy are analyzed. As for the experimental variables, vacuum, acceleration time, and speed are changed to find the most efficient value by comparing the stabilization time. The smaller the vacuum and the larger the radius, the longer the settling time. If the radius is small, high-speed rotation performance is good, and if the radius is large, low-speed rotation performance is good. In the future, we plan to conduct an experiment to measure the entire of the wafer.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1359-1361
• /
• 1996

This paper describes a design of real time fuzzy controller using Minimum fuzzy control Rule Selection Method(MRSM). The control algorithm of dynamic systems needs less computation time and memory. To reduce the computation time of fuzzy logic controller, minimum number of rules are to be selected for the fuzzy input variable. The universe of discourse is divided by the number of linguistic labels to allocate the assigned membership function to the fuzzy input variables. In this case, since fuzzy input variables are continuous, scale factor SU is tuned independently. According to increment of SU control surface is improved to adapt the change of system parameter. At this, crisp control surface is increased. With the increament of crisp control surface, fuzzy control surface is reduced. When error state deviates from desirable error state, crisp control surface is more useful than fuzzy control surface for obtaining fast rising time.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.213-220
• /
• 2015

In this paper, we present a reliability-based iterative proportionality-logic decoding algorithm for two classes of structured low-density parity-check (LDPC) codes. The main contributions of this paper include: 1) Syndrome messages instead of extrinsic messages are processed and exchanged between variable nodes and check nodes, which can reduce the decoding complexity; 2) a more flexible decision mechanism is developed in which the decision threshold can be self-adjusted during the iterative process. Such decision mechanism is particularly effective for decoding the majority-logic decodable codes; 3) only part of the variable nodes satisfying the pre-designed criterion are involved for the presented algorithm, which is in the proportionality-logic sense and can further reduce the computational complexity. Simulation results show that, when combined with factor correction techniques and appropriate proportionality parameter, the presented algorithm performs well and can achieve fast decoding convergence rate while maintaining relative low decoding complexity, especially for small quantized levels (3-4 bits). The presented algorithm provides a candidate for those application scenarios where the memory load and the energy consumption are extremely constrained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1195-1198
• /
• 2004

본 논문에서는 레이더(Radar)나 소나(Sonar) 시스템 등에서 중요하게 여겨왔던 신호의 방위각 추정기법들은 신호원의 수를 정확히 알아야 한다는 문제점이 있었다. 이러한 문제점들을 최근에는 빠른 수렴속도를 가지는 칼만 필터를 사용하여 신호원의 정보 없이 잡음 부공간을 성공적으로 추정하는 방법을 제안하게 되었는데 이 방법은 중간대 이상의 신호대 잡음비(SNR)가 유지되는 경우 신호의 정보 얼이 DOA를 추정할 수 있는 것으로 평가되어왔다. 그러나 이러한 알고리즘은 임펄스성 잡음이 섞인다면 성능저하를 가져을 수 있다. 따라서 본 논문에서는 칼만 필터를 바탕으로 한 MUSIC 알고리즘에 시변메모리인자와 후버 영향 함수를 도입하여 임펄스 잡음에 강인한 DOA 추정알고리즘을 제안한다.