• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.443-451
• /
• 2010

This paper describes a fully integrated CMOS low-IF mobile-TV RF tuner for Band-III T-DMB/DAB applications. All functional blocks such as low noise amplifier, mixers, variable gain amplifiers, channel filter, phase locked loop, voltage controlled oscillator and PLL loop filter are integrated. The gain of LNA can be controlled from -10 dB to +15 dB with 4-step resolutions. This provides a high signal-to-noise ratio and high linearity performance at a certain power level of RF input because LNA has a small gain variance. For further improving the linearity and noise performance we have proposed the RF VGA exploiting Schmoock's technique and the mixer with current bleeding, which injects directly the charges to the transconductance stage. The chip is fabricated in a 0.18 um mixed signal CMOS process. The measured gain range of the receiver is -25~+88 dB, the overall noise figure(NF) is 4.02~5.13 dB over the whole T-DMB band of 174~240 MHz, and the measured IIP3 is +2.3 dBm at low gain mode. The tuner rejects the image signal over maximum 63.4 dB. The power consumption is 54 mW at 1.8 V supply voltage. The chip area is $3.0{\times}2.5mm^2$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.1 s.120
• /
• pp.48-58
• /
• 2007

The purpose of this study was not only to clearly examine the features of the scenery and visual elements of Oreum (parasitic cones) but also to investigate primary factors in landscape preferences for these cones. This study further attempted to gain basic information for examining the preservation of Oreum in regards to the influence of scenery on the general public. A Multiple Regression Analysis was used for this study for which the independent variable was the area ratio of the fore-, mid-, and background of the view under the feature element and the structure of the scenery at the Oreum. The dependent variables were the preference value, the number of summits, and the highest altitude of the Oreum. All but the highest inclination were positive variables. The area ratio of the Oreum was found to be the most important variable. The area of sky and the area of the distant scenery were shown to be positive explanation variables, while the area to the fore of the view and the area to the middle of the view were shown as negative explanation variable. In the preference for Oreum scenery, which has a high visibility and is clearly outlined against the skyline, it was found that as the hindrance element of visibility near to a visual point or the area ratio increased, the preference for the Oreum scenery decreased.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.275-285
• /
• 2003

The now video coding standard H.264 employs variable block size motion compensation, multiple references, and quarter-pel motion vector accuracy. These techniques are key features to accomplish higher coding gain, however, at the same time main factors that increase overall computational complexity. Therefore, in order to apply H.264 to many applications, key techniques are requested to improve their speed. For this reason, we propose a fast motion estimation which is suited for variable block size motion communication. In addition, we propose a fast mode decision method to choose the best mode at early stage. Experimental results show the reduction of the number of SAT SATD calculations by a factor of 4.5 and 2.6 times respectively, when we compare the proposed fast motion estimation and the conventional MVFAS $T^{［8-10］}$. Besides, the number of RDcost computations is reduced by about 45%. Therefore, the proposed methods reduces significantly its computational complexity without noticeable coding loss.

• Smart Structures and Systems
• /
• v.8 no.5
• /
• pp.501-524
• /
• 2011

Recent studies have discovered that a conventional passive isolation system may suffer from an excessive isolator displacement when subjected to a near-fault earthquake that usually has a long-period velocity pulse waveform. Semi-active isolation using variable friction dampers (VFD), which requires a suitable control law, may provide a solution to this problem. To control the VFD in a semi-active isolation system more efficiently, this paper investigates experimentally the possible use of a control law whose control logic is similar to that of the anti-lock braking systems (ABS) widely used in the automobile industry. This ABS-type controller has the advantages of being simple and easily implemented, because it only requires the measurement of the isolation-layer velocity and does not require system modeling for gain design. Most importantly, it does not interfere with the isolation period, which usually decides the isolation efficiency. In order to verify its feasibility and effectiveness, the ABS-type controller was implemented on a variable-friction isolation system whose slip force is regulated by an embedded piezoelectric actuator, and a seismic simulation test was conducted for this isolation system. The experimental results demonstrate that, as compared to a passive isolation system with various levels of added damping, the semi-active isolation system using the ABS-type controller has the better overall performance when both the far-field and the near-fault earthquakes with different PGA levels are considered.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1759-1771
• /
• 2017

In this paper, an improved continuous integral variable structure systems(ICIVSS) with the prescribed control performance is designed for simple regulation controls of uncertain general linear systems. An integral sliding surface with an integral state having a special initial condition is adopted for removing the reaching phase and predetermining the ideal sliding trajectory from a given initial state to the origin in the state space. The ideal sliding dynamics of the integral sliding surface is analytically obtained and the solution of the ideal sliding dynamics can predetermine the ideal sliding trajectory(integral sliding surface) from the given initial state to the origin. Provided that the value of the integral sliding surface is bounded by certain value by means of the continuous input, the norm of the state error to the ideal sliding trajectory is analyzed and obtained in Theorem 1. A corresponding discontinuous control input with the exponential stability is proposed to generate the perfect sliding mode on the every point of the pre-selected sliding surface. For practical applications, the discontinuity of the VSS control input is approximated to be continuous based on the proposed modified fixed boundary layer method. The bounded stability by the continuous input is investigated in Theorem 3. With combining the results of Theorem 1 and Theorem 3, as the prescribed control performance, the pre specification on the error to the ideal sliding trajectory is possible by means of the boundary layer continuous input with the integral sliding surface. The suggested algorithm with the continuous input can provide the effective method to increase the control accuracy within the boundary layer by means of the increase of the $G_1$ gain. Through an illustrative design example and simulation study, the usefulness of the main results is verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.827-833
• /
• 2020

In this paper, to reduce the unpaid rate of local governments, the internal data elements affecting the arrears in Water-INFOS are searched through interviews with meter readers in certain local governments. Candidate data affecting arrears from national statistical data were derived. The influence of the independent variable on the dependent variable was sampled by examining the disorder of the dependent variable in the data set called information gain. We also evaluated the higher prediction rates of decision tree and logistic regression using n-fold cross-validation. The results confirmed that the decision tree can find more accurate customer payment patterns than logistic regression. In the process of developing an analysis algorithm model using machine learning, the optimal values of two environmental variables, the minimum number of data and the maximum purity, which directly affect the complexity and accuracy of the decision tree, are derived to improve the accuracy of the algorithm.

• Health Policy and Management
• /
• v.14 no.3
• /
• pp.66-96
• /
• 2004

This study was intended to describe the hypertensive patient's lifestyle and quality of life by creating a hypothetic model on the lifestyle and quality of life and by examining a causeand effect relationship, and to contribute to countermeasures for practicing their lifestyle and improving the quality of life through creating a predictable model. Exogenous variable($\xi$) of hypothetic model in this study composed of a family support, hypertension knowledge, perceived benefit and toughness. Endogenous variable($\eta$) composed of self-esteem, perceived health state, depression, lifestyle and quality of life. There were 6 measured variables for exogenous variable(x). There were 9 measured variables(y) for endogenous variable. Also, there was error variable ($\delta,\;\epsilon$) of an individual. The survey was conducted for 207 hypertensive parents who received an out-patient service for 3 weeks from September 15, 2003 to October 3, 2003 after diagnosing as hypertension from 2 general hospitals in Daegu. As the conformance of hypothetic model in this study, there were $x^2$= 155.81, standard $x^2$ ($x^2$/df)=2.32, GFI=0.003, NFI=0.971, CFI=0.982, and RMSEA=0.080. Generally, the hypothetic model and actual data were well coincided. The higher the hypertension knowledge was(t=6.030), the higher the perceived benefit was(t=9.429), the higher the toughness was(t=2.783), and the higher the perceived health state was(t=2.282), the higher the lifestyle was. However, the degree of depression (t=-0.038), family support(t=1.161), and self-esteem(t=0.518) was not affected. The higher the family support was(t=10.476), the higher the self-esteem was(t=7.244), the higher the perceived health state was(t=6.996), the lower the degree of depression was(t=-2.044), and the higher the practice degree of lifestyle was(t=3.315), the higher the quality of life was. However, the toughness(t=1.672) didn't have a significant influence on the quality of life. It was modified to increase the model conformance and gain a conscious model As the result of model revision, for the model conformance, there were $x^2$= 118.43, standard $x^2$=1.69, GFI=0.923, NFI=0.976, CFI=0.982, and RMSEA=0.078. As the revised model showed the better conformance than hypothetic model, it seemed to be more suitable model. In the revised model, the perceived benefit(t=9.440) affected the lifestyle in the revised model. Then, the lifestyle was influenced by hypertension knowledge(t=6.139), toughness (t=2.757), family support(t=2.078), perceived health state(t=1.962) in the order. As a factor which affected the quality of life, there were the family support(t=l0.46l), self-esteem(t=7.368), perceived health state(t=6.989), lifestyle(t=3.316), toughness(t=2.584), and depression(t=-1.968) in the order. It showed the significant effect.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.189-195
• /
• 2005

This paper presents a new velocity estimation strategy for a non-salient permanent magnet synchronous motor drive without high frequency signal injection or special PWM pattern. This approach is based on the d-axis current regulator output voltage of the drive system, which contains the rotor position error information. The rotor velocity can be estimated through a rotor position tracking PI controller that controls the position error at zero. For zero and low speed operation, the PI gain of the rotor position tracking controller has a variable structure according to the estimated rotor velocity. Then, at zero speed, the rotor position and velocity have sluggish dynamics because the varying gains are very low in this region. In order to boost the bandwidth of the PI controller during zero speed, the loop recovery technique is applied to the control system. The PI tuning formulas are also derived by analyzing this control system by frequency domain specifications such as phase margin and bandwidth assignment.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2003.11a
• /
• pp.51-56
• /
• 2003

The trained examiner can gain considerable information from visual inspections of the elbow joint, Because much of the joint is subcutaneous, any appreciable alteration in the skeletal anatomy often is detectable. Gross soft tissue swelling or muscle atrophy is also early observed. Inspection and palpation of the medial and lateral epicondyles and the tip of the otecranon from an equilateral triangle with the elbow is flexed. Normally, the arc of flexion extension, although variable, ranges from about O to 140 degrees plus or minus 10 degrees. The posterolateral rotatory instability(PLRI) of the elbow is most common pattern of elbow instability. The lateral collateral ligament complex also includes a narrow but stout band of ligamentous tissue blending with the distal and proterior fibers of the capsule to insert distally on the crista supinatoris of the ulna. This is the lateral ulnar collateral ligament(LUCL). A clinical elbow pivot shift test confirms the PLRI. There are also two active apprehension signs.

• ETRI Journal
• /
• v.29 no.2
• /
• pp.212-218
• /
• 2007

A novel low-voltage CMOS current feedback operational amplifier (CFOA) is presented. This realization nearly allows rail-to-rail input/output operations. Also, it provides high driving current capabilities. The CFOA operates at supply voltages of ${\pm}0.75V$ with a total standby current of 304 ${\mu}A$. The circuit exhibits a bandwidth better than 120 MHz and a current drive capability of ${\pm}1$ mA. An application of the CFOA to realize a new all-pass filter is given. PSpice simulation results using 0.25 ${\mu}m$ CMOS technology parameters for the proposed CFOA and its application are given.