• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.32.1-32.1
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• v.29 no.7
• /
• pp.1349-1352
• /
• 2008

We report a novel patterning method for a homo-polymeric poly(3-hexylthiophene) (P3HT) nanofilm particularly capable of strong adhesion to a $SiO_2$ surface. An oxidized silicon wafer substrate was micro-contact printed with n-octadecyltrichlorosilane (OTS) monolayer, and subsequently its negative pattern was selfassembled with three different amino-functionalized alkylsilanes, (3-aminopropyl)trimethoxysilane (APS), N- (2-aminoethyl)-3-aminopropyltrimethoxy silane (EDAS), and (3-trimethoxysilylpropyl) diethylenetriamine (DETAS). Then, P3HT nanofilms were selectively grown on the aminosilane pre-patterned areas via the vapor phase polymerization method. To evaluate the adhesion, patterning, and the film itself, the PEDOT nanofilms and SAMs were investigated with a $Scotch^{(R)}$ tape test, contact angle analyzer, ATR-FT-IR, and optical and atomic force microscopes. The evaluation showed that the newly developed all bottom-up process can offer a simple and inexpensive patterning method for P3HT nanofilms robustly adhered to an oxidized Si wafer surface by the mediation of $FeCl_3$ and amino-functionalized alkylsilane SAMs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.100.3-100
• /
• 2001

This article deals with the development of a mathematical model for the finishing polycarbonate polymerization process using a horizontal rotating disk-ring reactor with counter-current gas sweeping and the performance analysis of the reactor system by using the model. Here we intend to propose a model describing the reactor system consisting of two phases, in which by-product phenol is removed from the polymer of high molecular weight compatible with the products of commercial grades. The vapor phase is represented by a tanks-ln-series model while the polymer melt phase is regarded as a plug flow reactor.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.465-468
• /
• 2007

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.461-467
• /
• 2015

This paper reports the combined effects of the triblock copolymer surfactant poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) and imidazole on the opto-electrical and mechanical properties of poly(3,4-ethylenedioxythiophene) (PEDOT)-based thin films prepared via vapor phase polymerization (VPP) using ferric p-toluenesulfonate as a catalyst. Various PEDOT-based thin films were synthesized using PEG-PPG-PEG and imidazole alone and in combination to compare and correlate their effects on film properties. The improved conductivity of the PEDOT films was higher than $1300S{\cdot}cm^{-1}$ when the surfactant and imidazole were used together. The PEG-PPG-PEG chain length was also varied to identify the best conditions for the VPP-based preparation of PEDOT thin films.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1018-1022
• /
• 1998

Characteristics and catalytic activities of 12-molybdophosphoricacid catalysts modified by ring opening polymerization of tetrahydrofuran (THF) were studied in this work. 12-Molybdophosphoricacid catalysts modified by THF showed higher conversions and product yields than the mother acid in the vapor-phase ethanol conversion. It was believed that the enhanced catalytic activities of modified 12-molybdophosphoricacids were due to structural flexibility of heteropolyanions and weakened hydrogen bond around heteropolyanions. THF interacted with protons and crystalline water molecules of heteropolyacids. The interaction between THF and heteropolyanoins, which crystalline water molecules act as intermediary, was the dominant factor deciding the catalytic activities of modified 12-molybophosphoricacids.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.294-297
• /
• 2011

Quality of PEDOT electrode thin film vapor phase-polymerized on 3-aminopropyltriethoxysilane (APS) self-assembled monolayer (SAM) is very crucial for making an ohmic contact between electrode and semiconductor layer of an organic transistor. In order to improve the quality of PEDOT film, the quality of APS-SAM laying underneath the film must be in the best condition. In this study, in order to improve the quality of APS-SAM, the monolayer was self-assembled on $SiO_2$ surface by a dip-coating method under strictly controlled relative humidity (< 18%RH). The quality of APS-SAM and PEDOT thin film were investigated with a contact angle analyzer, AFM, FE-SEM, and four-point probe. The investigation showed that a PEDOT film grown on the humidity-controlled SAM is very smooth and compact (sheet resistivity = 20.2 Ohm/sq) while a film grown under the uncontrolled condition is nearly amorphous and contains quite many pores (sheet resistivity = 200 Ohm/sq). Therefore, this study clearly proves that a highly improved quality of APSSAM can offer a highly conductive PEDOT electrode thin film on it.

• Korean Journal of Materials Research
• /
• v.18 no.12
• /
• pp.664-668
• /
• 2008

Vapor phase polymerization of a conductive polymer on a $SiO_2$ surface can offer an easy and convenient means to depositing pure and conductive polymer thin films. However, the vapor phase deposition is generally associated with very poor adhesion as well as difficulty when patterning the polymer thin film onto an oxide dielectric substrate. For a significant improvement of the patternability and adhesion of Poly(3-hexylthiophene) (P3HT) thin film to a $SiO_2$ surface, the substrate was pre-patterned with n-octadecyltrichlorosilane (OTS) molecules using a ${\mu}$-contact printing method. The negative patterns were then backfilled with each of three amino-functionalized silane self-assembled monolayers (SAMs) of (3-aminopropyl) trimethoxysilane (APS), N-(2-aminoethyl)-aminopropyltrimethoxysilane (EDA), and (3- trimethoxysilylpropyl)diethylenetriamine (DET). The quality and electrical properties of the patterned P3HT thin films were investigated with optical and atomic force microscopy and a four-point probe. The results exhibited excellent selective deposition and significantly improved adhesion of P3HT films to a $SiO_2$ surface. In addition, the conductivity of polymeric thin films was relatively high (${\sim}13.51\;S/cm$).

• Journal of Integrative Natural Science
• /
• v.5 no.4
• /
• pp.233-236
• /
• 2012

In this study, PEDOT thin films polymerized with Iron(III)tosylate ($Fe(PTS)_3$) and grown on acetic acid-catalyzed 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM) surfaces by VPP method have been investigated. PEDOT thin films were synthesized on APS self-assembled $SiO_2$ wafer surface at two different concentrations (20 wt% and 40 wt%) and growth time (3 and 30 minutes), and then they were compared. PEDOT vapour phase-polymerized with 40 wt% $Fe(PTS)_3$ oxidant completely formed a thin film on acetic acid-catalyzed APS-SAM surface while with 20 wt% $Fe(PTS)_3$ did not at all. It means that the oxidant can be uniformly coated on acetic acid-catalyzed APS-SAM surface at the 40 wt% concentration, which gives rise to the uniform growth of PEDOT thin film on it.

• Journal of Integrative Natural Science
• /
• v.2 no.1
• /
• pp.13-17
• /
• 2009

A newly developed OTFT manufacturing process using the combination of self-assembly techniques and vapor phase polymerization method revealed that a thick $SiO_2$ dielectric layer (100~200 nm) is not well compatible with conducting polymer electrode, thereby resulting in still recognizable contact resistance, unstable $V_{th}$ and leaking off current. A couple of very recent studies showed that this issue may be solved by replacing such inorganic dielectric with a self-assembled monolayer or multilayer (organic) dielectric. Therefore, this short review introduces recent trends in the development of high performance thin film transistor consisting of both organic semiconductor and SAM dielectric.