• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2310-2318
• /
• 2004

The effects of change in injection pressure on spray structure in high temperature and pressure field have been investigated. The analysis of liquid and vapor phases of injected fuel is important for emissions control of diesel engines. Therefore, this work examines the evaporating spray structure using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 400 bar to 800 bar by using a common rail injection system. Also, we conducted simulation study by modified KIVA-II code. The results of simulation study are compared with experimental results. The images of liquid and vapor phase for free spray were simultaneously taken by exciplex fluorescence method. As experimental results, the vapor concentration of injected fuel is leaner due to the increase of atomization in the case of the high injection pressure than in that of the low injection pressure. The calculated results obtained by modified KIVA-II code show good agreements with experimental results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.472-477
• /
• 2003

This study was performed to investigate the behavior of vapor phase of fuel mixtures with different piston cavity diameters in a optically accessible engine. The images of vapor phases were measured in the motoring engine using exciplex fluorescence method. The conventional engine was modified as GDI engine with swirl flow. Fuel was injected into atmospheric nitrogen to prevent quenching phenomenon by oxygen. Injection pressure is 5.1MPa. Two dimensional spray fluorescence image of vapor phases was acquired to analyze spray behavior and fuel distribution inside of cylinder. Three injection timings were set at BTDC $180^{\circ}$, $60^{\circ}$and $60^{\circ}$. With a fuel injection timing of BTDC $60^{\circ}$, fuel-rich mixture was concentrated in near the cavity center. With a fuel injection timing of BTDC $60^{\circ}$, fuel-rich mixture level in the center region was highest in the S-type during the late compression stroke. With a fuel injection timing of BTDC $180^{\circ}$, fuel was not affected in a piston cavity and generally distributed as homogeneous mixture.

• 한국표면공학회지
• /
• 제41권2호
• /
• pp.43-47
• /
• 2008

Cubic boron nitride(c-BN) films were deposited on tungsten carbide insert tool by microwave plasma enhanced chemical vapor deposition(MPECVD) from a gas mixture of triethyl borate$(B(C_2H_5O)_3)$, ammonia $(NH_3)$, hydrogen$(H_2)$ and argon(Ar). The qualities of deposited thin film were investigated by x-ray diffrac-tion(XRD), field emission scanning electron microscopy(FE-SEM) and micro Raman spectroscope. The surface morphologies of the synthesised BN as well as crystallinity appear to be highly dependent on the flow rate of $B(C_2H_5O)_3$ and $(NH_3)$ gases. The deposited film had more crystallized phases with 5 scem of $B(C_2H_5O)_3$ and $(NH_3)$ gases than with 2 sccm, and the phase was identified as c-BN by micro Raman spectroscope and XRD. The adhesion strength were also increased with increasing flow rates of $B(C_2H_5O)_3$ and $(NH_3)$ gases.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.380-385
• /
• 2005

An experimental apparatus was constructed to obtain vapor-liquid equilibrium data for $CO_2$/oil mixtures using mass analysis method with sample cylinder. Lubricants employed were POE(Polyol Ester) oil and PAG(Poly Alkylene Glycol) oil. The phase equilibria of $CO_2$/oil mixtures formed in high pressure equilibrium cell are observed through sight glasses at the opposite ends. Data were measured over the temperature range from -10 to $10^{\circ}C$ with $5^{\circ}C$ intervals under pressures up to 14 MPa. Mole fractions were calculated for $CO_2$/oil and $CO_2$/PAAG, respectively and were compared with each other.

• 설비공학논문집
• /
• 제19권3호
• /
• pp.213-219
• /
• 2007

An experimental apparatus was constructed to obtain vapor-liquid equilibrium data for $CO_2/oil$ mixtures using mass analysis method with sample cylinder. Lubricants employed were POE (poly-ol ester) and PAG (poly alkylene glycol). The phase equilibria of $CO_2/oil$ mixtures prevailed in an equilibrium cell were observed through a couple of sight glasses at the opposite ends. Data were obtained over the temperatures $-10^{\circ}C,\;-5^{\circ}C,\;0^{\circ}C,\;5^{\circ}C,\;10^{\circ}C,\;25^{\circ}C,\;40^{\circ}C,\;60^{\circ}C,\;and\;80^{\circ}C$ under pressures up to 14 MPa and then mole fractions were calculated, respectively In general, more solubility of $CO_2$ is observed in POE than in PAG. Miscibility gap is closed for $CO_2/POE$ mixture but not for $CO_2/PAG$.

• Carbon letters
• /
• 제18권
• /
• pp.37-42
• /
• 2016

Graphene was grown on molybdenum (Mo) foil by a chemical vapor deposition method at different growth temperatures (1000℃, 1100℃, and 1200℃). The properties of graphene were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy, and Raman spectroscopy. The results showed that the quality of the deposited graphene layer was affected by the growth temperature. XRD results showed the presence of a carbide phase on the Mo surface; the presence of carbide was more intense at 1200℃. Additionally, a higher I_2D/I_G ratio (0.418) was observed at 1200℃, which implies that there are fewer graphene layers at this temperature. The lowest I_D/I_G ratio (0.908) for the graphene layers was obtained at 1200℃, suggesting that graphene had fewer defects at this temperature. The size of the graphene domains was also calculated. We found that by increasing the growth temperature, the graphene domain size also increased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.195-195
• /
• 2010

$Ga_2O_3$ thin films have been grown on Si(001) substrates by metalorganic chemical vapor deposition (MOCVD) using dimethylgallium isopropoxide ($Me_2GaO^iPr$, DMGIP) with oxygen as the reactant gas. Suitability of the precursor for CVD was confirmed by thermogravimetric analysis (TGA) and vapor pressure measurement. Deposition was carried out in the substrate temperature range $450-650^{\circ}C$. Spectroscopic ellipsometry, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) and Rutherford back-scattering spectroscopy (RBS) were used to determine the thickness, crystallinity, and composition and stoichiometry of the films, respectively. From the slope of the Arrhenius plot in the temperature range $500-550^{\circ}C$, the activation energy of deposition was found to be $225.5\;kJ\;mol^{-1}$. As-deposited films were amorphous, but the monoclinic $\beta-Ga_2O_3$ phase was revealed after annealing the films in air at $1050^{\circ}C$. The XPS and RBS analyses indicate that the $Ga_2O_3$ films obtained by using DMGIP were found to be almost stoichiometric.

• Bulletin of the Korean Chemical Society
• /
• 제15권1호
• /
• pp.79-83
• /
• 1994

The organometallic chemical vapor deposition of single precursors, $[Me_2Al({\mu}-NHR)]_2\;(R=^iPr,\;^tBu)$, for alumininum nitride thin films has been investigated to evaluate their poroperties as potential precursors. In chemical vapor deposition processes the gas phase products scattered from a Ni(100) substrate were analyzed by mass spectrometry and the deposited films were characterized by X-ray photoelectron spectroscopy (XPS). The optimum temperatures for the formation of AlN films have been found to be between 700 K and 800 K. Carbon contamination of the films seems to be attributed mainly to the methyl groups bonded to the aluminum atoms. It is apparent that $^tBu$ group is better than $^iPr$ group as a substituent on the nitrogen atom of the single precursors for the AlN thin film formation.

• 설비공학논문집
• /
• 제18권11호
• /
• pp.859-866
• /
• 2006

This paper presents the vapor-liquid equilibrium (VLE) data measured for carbon dioxide and propane mixtures. Their mixtures were considered as promising alternative refrigerants due to good thermophysical properties and negligible environmental impact. The isothermal VLE data were measured at eight temperatures ranging from 253.15 to 323.15 K in the circulation type equipment with a view cell. The binary system was found to be a zeotropic mixture in the tested temperature range and could be correlated with sufficient accuracy by using the Peng-Robinson equation of state (PR EoS) with the van der Waals one fluid mixing rule. A comparison with published experimental VLE data has been carried out by means of the PR equation of state. In addition, the phase behaviors of carbon dioxide and propane mixtures were analyzed based on the measured VLE data.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.1-6
• /
• 2010

Star-like ZnO nanostructures were grown on SI(100) substrates with carbon(C) catalyst by employing vapor-solid(VS) mechanism. The morphologies and structure of ZnO nanostructures were investigated by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and Raman spectrum, Photoluminescence spectrum. The results demonstrated that the as-synthesized products consisted of star-like ZnO nanostructure with hexagonal wurtzite phase. Nanostructures grown at 1100 were mainly star-like in structure with diameters of 500 nm. The legs of the star-like nanostructures were preferentially grown up along the [0001] direction. A vapor.solid (VS) growth mechanism was proposed to explain the formation of the star-like structures. Photoluminescence spectrum exhibited a narrow emission band peak around 380 nm and a broad one around 491 nm. Raman spectrum of the ZnO nanostructures showed oxygen defects in ZnO nanostructures due to the existence of Ar gas during the growth process, leading to the dominant green band peak in the PL spectrum.