During laser overlap welding of galvanized steel sheets, explosion of weld pool by the high pressure zinc vapor induces weld defects like porosity and blowhole. In this study, laser 2-pass welding was implemented to prevent the weld defects. Through the 1st pass welding, zinc layers on the faying surfaces were removed when proper heat input was applied. Excessive heat input could result in explosion even during the 1st pass welding and insufficient heat input could not remove enough region of zinc layer for the 2nd pass welding. Coating weights of $45g/m^2$ and $60g/m^2$ were considered and for both cases sound welds without weld defects could be achieved. In spite of 2-pass welding, softening of weld and heat affected zone was not observed and Zn coating was not diluted into the weld metal.
인화점은 액체 혼합물의 화재와 폭발의 위험성을 특징짓는 주된 성질이다. 인화점은 가연성 액체에 불꽃이 가해졌을 때 점화가 발생하는 가장 낮은 온도로 정의된다. Seta flash 밀폐식 장치를 이용하여 이성분계 수용성 혼합물인 water-methanol계와 water-ethanol계의 인화점을 측정하였다. Wilson 식과 UNIQUAC 식과 같은 활동도 모델식을 활용한 방법을 이용하여 인화점을 계산하였다. 이 계산치와 라울의 법칙에 의한 계산치를 비교하였다. 그 결과, 활동도 계수 모델식에 의한 계산치가 라울의 법칙에 의한 계산치 보다 측정값에 보다 근접하였다.
콘크리트의 폭렬 발생 메커니즘에 대해서는 수증기압력에 의한 파괴, 내 외부의 온도 차이에 의해 발생하는 표면 압축력에 의한 파괴, 앞선 두 가지 요인의 복합작용에 의한 파괴가 있다. 이러한 폭렬에 영향을 주는 요인은 콘크리트 자체의 재료적 특성과 관계된 내부 요인과 환경에 의한 외부 요인으로 나눌 수 있으며 폭렬 현상을 이해하기 위해서는 두 가지 요인에 대한 충분한 고려가 필요하다. 외부 환경의 요소로써 가열 속도가 다른 경우 콘크리트 내부의 수분응집 및 수증기압력의 거동이 달라질 것으로 판단된다. 따라서 이 연구에서는 30, 50, 70, 90, 110 MPa의 다양한 강도 영역의 콘크리트를 대상으로 ISO-834 표준가열곡선과 $1^{\circ}C/min$의 가열 속도를 적용하여 가열 속도에 따른 콘크리트의 폭렬 성상 및 수증기압력, 열팽창 변형을 평가하였다. 실험 결과 콘크리트의 폭렬은 급속 가열조건에서 발생하며, 콘크리트가 고강도화될수록 폭렬에 의한 단면손실량이 증가하였다. 또한, 가열 초기에 콘크리트 표면부의 수증기압력 상승 속도 및 가열 속도에 따른 열팽창에 의한 초기압력 상쇄효과가 콘크리트의 폭렬 발생에 중요한 영향을 미치는 것으로 나타났다.
군용 회전익 항공기는 임무 특성상 피탄 환경에 노출이 많이 되며, 피탄 후 연료누설에 의한 화재는 인명 손실로 직결된다. 피탄 시 조종사 및 승무원 생존성 향상을 위해 회전익 항공기 연료탱크는 내탄 성능과 내 폭발 성능이 요구된다. 내탄 성능은 자기밀폐성 셀을 연료탱크에 적용하여 만족시킬 수 있으며, 내폭발 성능은 폭발가능 영역의 산소 농도를 낮추는 방법과 열에 의한 연료의 증발을 최소화하여 가연성 연료 증기의 생성을 억제하는 방법을 통해 만족시킬 수 있다. 한국형 기동헬기는 피탄에 대한 내폭발 요구도를 만족시키기 위해 불활성가스발생장치를 통해 연료탱크 내 불활성 가스를 충진 시켜 산소농도를 낮추는 방법을 적용하고 있다. 본 논문에서는 국내 무기체계 양산단계의 부품국산화 업무 절차에 따라 개발된 불활성가스 발생장치의 개발 과정 전반에 대하여 기술하고 있다. 순수 국내 기술력을 통해 개발/제작 되었으며, 단품 성능 시험 및 항공기 장착 시험을 통해 기 장착되어 있는 제품 대비 동등이상의 성능을 가짐을 확인할 수 있었다.
Tungsten and tungsten heavy alloys have widespread application as radiation shielding devices and heavy duty electrical contacts. High density and good room temperature mechanical properties have generated interest in evaluating tungsten and tungsten alloys as kinetic energy penetrators against armor. Nowdays ultra fine-grained tungsten powders are in great interest because higly dense structures can be obtained at low temperature, pressure and lower sintering time. Several physical md chemical methods are available for the synthesis of nanometric metal Powders: ball milling, laser abalation, vapor condensation, chemical precipitation, metallic wire explosion i.e. However production rates of the above mentioned methods are low and further efforts are needed to find out large-scale synthesis methods. From this point of view solid state combustion method ( known as SHS) represents undoubted interest.
Electrostatic charge is generated in large scale or high speed processes dealing with materials with large resistance, or under complicated condition. Fire and explosion often occur due to electrostatic charge accumulated in flammable gases, vapor, liquids and powder. It is usually very difficult to verify the cause of accidents as well as the prevention. In this study, it is shown that the needle electrode needs the electrode gap from 1.8mm to 3.8mm, sphere electrode and plate electrodes need the electrode gap of 1.9mmfor the minimum ignition energy. The sphere electrode and the plate electrode requires 12.8mJ and 3.2mJ of minimum ignition energy respectively with the electrode gap of 1.1mm. The ignition voltage rises to very large value as the ground resistance increases.
The energetic and environmental problems have been getting serious after the revolution of modern industry. Therefore, demand of gas as an eco-friendly energy source is increasing. With the demand of gas, the use of gas is also increased, so injury and loss of life by the fire have been increasing every year. Hence the influence on flame caused by Vapor Cloud Explosion in enclosure of experimental booth was calculated by using the API regulations. And the accident damage was estimated by applying the influence on the adjacent structures and people into the PROBIT model. According to the probit analysis, the spot which is 5meter away from the flame has nearly 100% of the damage probability by the first-degree burn, 27.8% of the damage probability by the second-degree burn and 14.5% of the death probability by the fire.
Glow discharge has lots of attractive properties, such as lower discharge sustaining voltage, no generation of ozone, and so on. And more, ionizer was developed recently using an atmospheric pressure glow discharge. On the other hand, ionizer needs a compressed or blown air to transport ion for charged objects. This air is very useful in explosive hazardous area to prevent the explosion of flammable gas and/or vapor by ignition sources, e.g. electrical spark. In this paper, we investigated the ionizing characteristic of atmospheric pressure glow discharge by controlled air flow rate from 5 liters to 60 liters a minute, and compared with decay time between the corona discharge and glow discharge as a function of some direction and distance from discharge ion source. We confirmed that an air flow rate needs 25 liters a minute to sustain the most suitable atmospheric pressure glow discharge and to increase an ionizing efficiency.
폴리머 수용액의 증기폭발 억제 효과에 대한 물리적 현상을 이해하기 위해 폴리에틸렌옥사이드 수용액에서의 풀비등 특성을 실험적으로 관찰하였다. 본 실험에서는 22.2mm와 9.5mm 직경의 두 구형 체를 가열하여 여러가지 농도의 3$0^{\circ}C$ 수용액에서 냉각시켰다. 그 결과, 순수한 물에서는 7$0^{\circ}C$ 이상인 최소막비등온도($\Delta$$T_{MFB}$)가 300ppm농도의 폴리머 수용액에서 22.2mm구의 경우 15$0^{\circ}C$ 까지, 9.5mm구의 경우 35$0^{\circ}C$까지 낮아짐을 알 수 있었다. 이러한 폴리머 수용액에서 최소막비등온도가 크게 낮아지는 현상은 이 수용액에서 중기폭발이 억제되는 이유로 해석될 수 있다. 또한, 외부 압력파의 막비등에 대한 영향을 관찰한 결과, 수용액의 농도가 클수록 증기막의 안정도가 커짐을 알 수 있었다. 이러한 폴리머 수용액에서의 비등 특성과 증기폭발 억제에 대한 실험 결과들은 원자로 비상냉각수에 폴리에틸렌옥사이드와 같은 폴리머를 최소 300ppm 정도 소량 첨가하는 방법으로 중대사고시 폭발적 FCI 반응을 방지 또는 완화할 수 있음을 제시한다.다.
본 연구는 플랜트에서 일반적으로 사용하는 서장탱크에서 Heavy가스의 누출에 의한 증기운폭발사고에 대한 영향평가방법을 제시하고 변수의 최적선택조건을 얻기 위하여 부탄저장용기의 누출사고에서 증기운폭발에 대한 사고결과를 평가하고 사고결과에 미치는 변수의 영향을 분석하였다. 이 때 증기운폭발에서 지표면과 일정한 높이에서 연속 누출하여 분산되는 경우에 대하여 $SuperChems^{TM}$ Professional Edition을 사용하여 기상변수와 공정변수들의 변화에 대한 영향을 분석하였다 실제의 조업조건을 표준조건으로 하여 부탄이 저장탱크에서 15분 동안 누출되는 경우에 대하여 사고결과를 산출하고 해석한 결과 연소하한농도(LFL)의 최대거리가 52m이었고. 증기운폭발에 의한 생성된 과압이 128.2m에서 1 psi를 나타내었다. 부탄저장용기의 누출사고 결과에 미치는 변수의 영향 정도는 다소 차이가 있었으나 대기안정도, 바람속도, 배관의 크기, 관심거리 등이었으며, 이들 변수들의 값의 변화에 따라 사고 결과값의 변화가 크게 나타났으며 관심거리가 짧을수록, 누출공의 크기가 클수록 사고에 미치는 영향이 증가하고, 사고결과에 따른 피해범위가 크게 나타났다. 바람속도가 느릴수록, 대기의 상태가 안정한 상태일수록 연소하한농도에 이르는 거리가 증가하고 사고결과가 크게 나타났으며 사고결과에 미치는 변수들의 영향도 증가하였다. 따라서 부탄과 같은 Heavy가스의 저장용기에서의 누출사고에 의한 사고결과에 영향을 미치는 변수들의 영향분석을 바탕으로 영향평가방법을 제시하고 사고결과에 영향을 미치는 중요변수를 선정하고 변수들의 최적선택조건을 얻기 위하여 적절한 변수 값들을 선택하는 기준을 제시하였고 사고결과를 정확한 방법에 의하여 평가하고 예측할 수 있도록 하였다.하며, $31\%$가 한국인 약사에게 건강관리를 의존하는 것으로 나타나 미국사회의 의료 서비스 접근도는 극히 취약한 것으로 드러났다. 의료서비스 접근을 막는 주요 장벽으로는 비싼 의료비 $(53\%)$ , 의사소통장애$(37\%)$로 나타났다. 보건의료 서비스를 위해 주로 이용하며 생활의 정보를 얻는 통로로는 한국어 신문$(69\%)$과 한국어 TV$(61\%)$, 한국어 라디오 $(57\%)$로 밝혀졌다. 결론적으로 한국 이민자들에게 좀더 나은 의료 서비스 수혜를 위해서는 문화 친밀도가 높은 의료환경 조성 및 의료 서비스 제공자들의 이해를 높이는 일 등과 함께 한국 이민자들이 의료보험을 살수 있도록 한국어로 된 의료 서비스 정보를 제공하는 등의 노력이 필요할 것으로 생각한다. 열등한 위치에 있는 여성층과 초기 이민 적응에 가장 문제를 일으킬 소지가 있는 노년층을 들 수 있겠다. 이 연구는 몇 가지 제한점을 가진다. 첫째. 연구 대상자 선정이 어려워서 자원자를 대상으로 연구가 행해졌다. 둘째. 적은 수의 연구 대상자를 대상으로 연구가 행해졌다. 셋째. 연구기간이 짧았던 까닭에 좀더 상세한 사례 연구가 이루어질 수 없었다 좀 더 신뢰할 수 있는 표본 추출 방법을 통하여 선정된, 많은 연구 대상자를 가지고, 심도 있는 연구가 추후 반복적으로 이루어져야 할 것이다.더욱 더 발전을 거듭하고 있으며, 외식은 여행과 여가 활동의 필수적인 요소로써 그 역할을 일조하고 있다. 이와 같은 여가시간의 증가는 독신자들에게는 좀더 많은 여유시간을 가족을 이루고 있는 가족구성원들에게는 가족과의 유대를 강화하는 휴식과 오락의 소비 트렌드를 창출시켰다. 이와 더불어 외식은 식사를
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.