• 제목/요약/키워드: valve detachment

검색결과 13건 처리시간 0.02초

선천성 심장기형에 대한 2차수술로서의 개심술 (Reoperation for congenital heart disease)

  • 안혁;성숙환;김용진;노준량;서경필
    • Journal of Chest Surgery
    • /
    • 제19권2호
    • /
    • pp.280-287
    • /
    • 1986
  • Between March 1978 and August 1985, 29 cases at various congenital heart diseases were reoperated because of remnant shunt of residual anomalies at Seoul National University Hospital. They were consisted of 10 cases of Tetralogy, 4 simple VSD, 6 complicated VSD. 3 partial ECD, and 5 other rare congenital anomalies. The interval between the initial and the second procedure ranged from 1 day to 122 months [mean; 26.9 months]. In 4 cases of them, the second procedure was done during initial hospitalization within 3 weeks post-operatively. The primary operation intended to be corrective surgery except four whose primary operation was palliative or exploratory one even though it was done with extracorporeal circulation. The indication for second operation was mainly residual shunt or valvular obstruction due to patch detachment or inadequate relief of stenotic lesion. Others were paravalvular leak, valvuloplasty failure, prosthetic valve failure, and inadequate primary diagnosis. Four patients were dead [14.3%]; three complicated VSD`s and one Tetralogy. There were 7 cases of nonfatal complication with subsequent improvement except one [diffuse cerebral dysfunction].

  • PDF

소화전과 이토변을 이용한 플러싱 적용 시 관 내 세척유량과 유속 모의 방안에 관한 연구 (A study on the simulation method for the flushing flowrate and velocity in the watermain using a hydrant and a drain valve)

  • 김아린;이은환;이송이;김광현;전환돈
    • 한국수자원학회논문집
    • /
    • 제55권spc1호
    • /
    • pp.1251-1260
    • /
    • 2022
  • 최근 상수관망은 노후화 및 관 내 스케일의 박리로 인해 적수 사고등 수질사고가 지속적으로 발생하고 있다. 관내 퇴적되어있는 스케일은 평상시엔 안정화되어 문제를 야기하지 않지만, 상수관망 시스템의 급격한 유속 및 유향 변화 등에 의해 발생하는 수충격에 의해 박리된 후 수용가로 유입되며 수질사고를 야기한다. 이를 사전에 방지하기 위해서는 주기적인 관세척으로 스케일을 제거할 필요가 있다. 관세척공법 중 가장 보편적으로 사용되는 방법은 플러싱으로 현재 국내·외에서 관세척을 위한 유속 및 세척기준 연구가 활발하게 진행되고 있다. 하지만, 플러싱 공법 적용 시 적정유속 기준에 관한 연구가 주로 진행되어, 세척시 관내 적정유속 확보여부를 사전에 검토하기 위한 구체적인 방안에 관한 연구는 미흡한 실정이다. 관 세척시 용수는 소화전 또는 이토변을 통과하면서 주손실과 미소손실이 발생하며, 이는 관 내 유속에 영향을 미치는 요인으로 세척효과 분석에 직접적인 영향을 준다. 이에 본 연구는 Minorloss Coefficient와 Emitter Coefficient를 적용한 모의를 통해 플러싱 적용 시 관 내 유속을 분석하는 수리해석 방법을 제안하였다. 제안한 방법을 예시관망과 A시 일부구역에 적용하여 적절성을 검토하고, 소화전과 이토변의 세척효과를 비교하였다. 적용 결과 소화전을 통과하는 수리학적 조건을 고려하지 않은 경우, 실제 발생하는 손실을 고려하지 못해 소화전에서 방출 가능한 유량 대비 큰 유량과 유속이 산출되는 결과를 보였고, 이토변의 경우는 긴 세척구간에도 세척유속과 유량의 확보가 용이하여 소화전에 비해 시간적. 효율적으로 큰 세척효과가 있을 것으로 판단하였다. 하지만, 실제 상수관망의 적용 시 이토변은 소화전에 비해 설치 개수가 적어 적용이 제한적이다. 이와같은 특성을 이해하여 실무자의 판단과 대상지역의 특징에 따라서 적절한 세척계획을 수립하는 것이 필요할 것으로 판단된다.

전동식 부항기에 대한 안전성 및 성능평가 가이드라인 개발연구 (Study on Developing Assessment Guideline for Safety and Performance of Electric Cupping Apparatus)

  • 이승호;김은정;신경훈;남동우;강중원;이승덕;이혜정;이재동;김갑성
    • Journal of Acupuncture Research
    • /
    • 제26권6호
    • /
    • pp.101-110
    • /
    • 2009
  • Objectives : We developed and proposed a guideline for safety and performance assessment of electric cupping apparatus(Class 2 medical device). Methods : We drafted the guideline for safety and performance assessment of electric cupping apparatus by referring the existing standards and guideline, based on online questionnaire for Korean medical doctors and measurement data from commercially available products. Physical dimension of cups and inner vacuum pressure were acquired for the measurement in order to achieve the purposes. Results : This guideline only can be applied to electric cupping apparatus for enhancing blood circulation by employing negative pressure generated by electricity. Seven items of appearance and label, operation test of pump, variation test of input electricity, vacuum level test, vacuum sustain test, cup-size dependent test, noise level test are suggested for evaluation subjects and methods required for electric cupping devices. Requirements for the design and development of electric cupping devices are suggested: vacuum level indicator, vacuum generation rate, pressure control, valve detachment stability, cup comparability, safety measure, surge protection, user friendliness, instruction for use (IFU). Conclusions : We proposed a guideline for safety and performance assessment of electric cupping apparatus to improve the quality of relating products and aid the commercialization of them, by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

  • PDF