• Journal of ILASS-Korea
• /
• v.9 no.2
• /
• pp.9-17
• /
• 2004

The performance characteristics of lean burn system in gasoline engine are mainly affected by the air-fuel mixture in cylinder, gas exchange process of manifold system, exhaust emission of engine, and the electronic engine control system. In order to obtain the effect of performance factors on the optimum conditions of lean burn engine, this study deal with the behavior of mixture formation, gas flow characteristics of air, flow and evaporation analysis of spray droplet in cylinder, vaporization and burning characteristics of lean mixture in the engine, and the control performance of electronic engine control system. The optimum flow conditions were investigated with the swirl and tumble flows in the combustion chamber with swirl control valve. The performance characteristics and optimum condition of flow field in intake system were analyzed by the investigation of inlet flow of air and combustion stabilization on cylinder.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.1
• /
• pp.63-67
• /
• 1985

KIA는 호평의 Bongo-9을 기본 model로 하여 도시형 다목적 leisure car인 Bongo-town을 개 발하게 되었다. TX엔진은 Bongo-town 탑재용으로 기존 1.3l TC 엔진을 volume-up 하여 전 회전 영역에서 괄목할 성능향상을 보였으며 특히 탑재차량의 특성을 고려하여 저속영역 torque를 강조하였고 부품호환성 및 생산 설비의 공용화에도 주력했다. 주요 개발내용은, 1) Cooling passage 개선 및 full siamese화 2) Piston과 connecting rod의 신설계 3) Piston 조합의 semi floating화 4) Cam shaft profile 선정 및 valve timing 변경 5) Distributor 최적진각특성 결정 6) Carburetor 개발 7) Torque limited fan and fan drive 채용 등이다. 상기내용중 중요한 몇가지를 기술하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.975-980
• /
• 1992

The purpose of this paper is to perform the engine driving well with controling the IAC(Idle Air Control) valve which controls the demand-air when the abrput increasing or decrasing and the idling, the fuel by controlling the injector, and the spark timing. This plant is the complex system because this should be controlled each other and each one affects other. We have controlled this system effectively by using Personal Computer in order to reduce the exhaust gas and improve the engine performance.

• Journal of Chest Surgery
• /
• v.45 no.4
• /
• pp.213-224
• /
• 2012

Tetralogy of Fallot (TOF) is an index lesion for all paediatric and congenital heart surgeons. In designing an appropriate operation for children with TOF, the predicted postoperative physiology must be taken into account, both for the short and long term. A favourable balance between pulmonary stenosis (PS) and pulmonary insufficiency (PI) may be critical for preservation of biventricular function. A unified repair strategy to limit both residual PS and PI is presented, along with supportive experimental evidence. A strategy for dealing with coronary anomalies and some comments regarding best timing of operation are also included.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.835-842
• /
• 2009

The present thesis carried out a research on a compression pressure's reduction phenomenon and its countermeasure according to the thermal efficiency improvement method by a Miller method in 4-cycle low speed diesel engine. In case of retardation of intake valve closing time in a engine, the theoretical heat efficiency shows a remarkably reducing trend when a compression ratio is not compensated. Accordingly, the thermal efficiency showed an increasing trend in case of compensating the compression ratio. Especially, it could be understood that the theoretical heat efficiency at near ABDC $100^{\circ}$ of intake valve closing time in case of compensation of the compression ratio was improved by around 25.1%, and the mean effective pressure was also increased by around 18.6%. Also, as the retardation of intake valve closing time increases, air quantity becomes insufficient due to a backflow phenomenon of intake air and thus thermal efficiency was decreased in a high load operation domain. The solving method of this problem is possible by supercharge. Therefore, in order to improve thermal efficiency by retardation of ntake valve closing time, the thermal efficiency improvement according to low compression is possible when there are a compensation device of a compression ratio and a supercharge device. This is a problem-solving method of low compression and high expansion cycle.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.22-27
• /
• 2021

This paper is a purpose to study the failure examples for LPG vehicle. The first example, the researcher certified the incongruity phenomenon decreased engine power by ignition fire leakage because of spark plug threaded part damage assembling in cylinder head. The second example, the timing mark that accurately adjusting the camshaft and crankshaft position were twisted about 0.5 block each other. Finally, the researcher seeked the disharmony phenomenon as it couldn't set ignition timing. The third example, the researcher knew the failure phenomenon by interrupted the closing period for intake valve moving with air flow in the number 3 port of cylinder head as the foreign substance in cylinder head didn't remove. Therefore, the manager of a car has to thorough going inspect and the manufacture of a car must remove the cause of failure with quality assurance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.9
• /
• pp.1185-1194
• /
• 2000

The characteristics of intake port flow and engine performance with swirl ratio variance in a turbocharged D.I. diesel engine were studied in this paper. The intake port flow is important factor which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. Through these experiments it can be expected to satisfy performance and emission by optimizing the main parameters; the swirl ratio of intake port, injection timing and compression ratio. The swirl ratio for ports was modified by hand-working and measured by impulse swirl meter. For the effects on performance and emission, the brake torque and brake specific fuel consumption were measured by engine dynamometer, NOx and smoke were measured by gas analyzer and smoke meter. The results of steady flow test are as follows; as the valve eccentricity ratio are closed to cylinder wall, the flow coefficient and swirl intensity are increased. Also we realized that there is a trade-off that the increase of swirl ratio decreases mean flow coefficient and increases the Gulf factor. And the optimum parameters to meet performance and emission through engine test are as follows; the swirl ratio 2.43, injection timing BTDC 13oCA and compression ratio 15.5.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.179-188
• /
• 1990

The characteristic of volumetric efficiency considering gas exchange process in a reciprocating engine is presented in this paper. The characteristic method is used for solving gas exchange problems of engine system in theoretical studies. The validity of the simulation is investigated by a comparison with the results obtained by the experiment which have been performed on the practical 4-cycle, 4-cylinder gasoline engine. The relationship between the volumetric efficiency and the intake pressure variation according to configuration of intake pipe, position of branch point, valve timing, compression ratio is clarified through simulation and experiment. The results predicted by the simulation are found to be in approximate agreement with those obtained by the experiment.

• Journal of Chest Surgery
• /
• v.50 no.4
• /
• pp.255-262
• /
• 2017

Background: Transcatheter aortic valve replacement (TAVR) has been suggested as a less invasive treatment for high-risk patients with aortic valve disease. I n this study, we compared the outcomes of conventional surgical aortic valve replacement (AVR) and TAVR in elderly patients aged over 80. Methods: A total of 108 patients aged 80 years or older who underwent isolated AVR (n=35) or TAVR (n=73) from 2010 through 2015 at Asan Medical Center were identified. Early and late clinical outcomes, including echocardiographic findings, were evaluated in both groups. The mean follow-up duration was $766.4{\pm}528.7days$ in the AVR group and $755.2{\pm}546.6days$ in the TAVR group, and the average timing of the last follow-up echocardiography was at $492.6{\pm}512.5days$ in the AVR group and $515.7{\pm}526.8days$ in the TAVR group. Results: The overall early mortality was 2.8% (0 of 35, 0% in the AVR group vs. 3 of 73, 4.1% in the TAVR group). Permanent pacemaker insertion was significantly more common in the TAVR group (p=0.010). Renal failure requiring dialysis and new-onset atrial fibrillation was more frequent and the length of hospital stay was longer in the AVR group; however, this difference did not reach statistical significance. In the TAVR group, 14 patients (19.2%) were rehospitalized due to cardiac problems, and 13 patients (17.8%) had developed significant paravalvular leakage by the time of the last follow-up echocardiography. Conclusion: TAVR could be a good alternative to conventional surgical AVR in elderly patients. However, TAVR has several shortcomings, such as frequent significant paravalvular leakage or readmission, which should be considered in decision-making.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1100-1106
• /
• 2009

Recently, there are quite a lot of attention is drown on the researches related to of Miller method applied high expansion cycle. For this study, high expansion cycles are formed and analyzed with the base view point of thermodynamics, and the features of each factors are also investigated. As a result of analysis, the expansion-compression ratio is expected with a decrease of effective compression ratio as intake valve closing time retarded, however, the decrease of mean effective pressure and its output is accompanied with the counterflow of intake air. Accordingly, as the consequence of such failure, it is expected that an alternative is needed for the realization of high expansion cycles, and the improvement over thermal efficiency. To materialize such cycle, the control system to delay the closing time of intake valve was designed and VVT, the 3 S/B low speed diesel engine, is applied to evaluate the efficiency. The result of the trial shows that there was no significant errors.