• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.320-323
• /
• 2007

The vacuum sealing method is adopted to minimize the residual impurity gas by enhancing a base vacuum level, and the resultant changes in the reset, address, and sustain discharge characteristics, such as a firing voltage, IR emission, and ICCD image, were examined in comparison with the conventional sealing method in the 42-in. AC-PDP. In the PDP cells fabricated by the vacuum sealing method, the ICCD observation illustrates that the discharge is initiated and extinguished very fast and its IR emission intensity is high.

• Journal of Information Display
• /
• 제9권4호
• /
• pp.39-44
• /
• 2008

This paper investigates the effects of the existing sealing methods, such as the conventional atmospheric-pressure sealing method and vacuum sealing, on temporal bright-image sticking. To produce a residual image caused by temporal brightimage sticking, the entire region of a 42-in panel with an Xe-(11%)-He(35%) gas mixture was abruptly changed to a full-white background image after displaying a square-type image at peak luminance for about 60s. From the monitoring of the difference in the display luminance, infrared emission, color temperature, and disappearing time between the cells with and without temporal bright-image sticking, it was observed that the vacuum sealing method contributes to the reduction of temporal bright-image sticking.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.703-706
• /
• 2004

This paper deals with the various sealing conditions in a vacuum and the discharge characteristics. The MgO thin film is prepared by e-beam evaporation method. Sealing process was performed in a vacuum at panel temperature of 430 $^{\circ}C$. We find the cracks on the MgO film surface, which results in higher discharge voltage and lower luminous efficiency. The vacuum in-line sealing technology does not require additional annealing process but induces the MgO cracks because of the high temperature sealing cycle in a vacuum. Therefore we modify the vacuum in-line sealing cycle which the MgO cracks are not found and the good characteristics of plasma displays are found in higher sealing pressure at sealing temperature of 430 $^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1688-1691
• /
• 2007

This paper shows that the boundary image sticking can be prohibited completely by using the vacuum sealing process, which means that the residual impurities such as nitrogen or oxygen can be a critical factor inducing the boundary image sticking. The production of boundary image sticking was checked in the test panel fabricated by the $N_2$ or $O_2$ flow during the vacuum sealing process. As a result, the boundary image sticking did not appear in the case of $N_2flow$, whereas the boundary image sticking was observed in the case of $O_2$ flow even though the test panel was fabricated by the vacuum sealing process.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.181-185
• /
• 2016

One of the important issues for fabricating the microelectronic display devices such as FED, PDP, and VFD is to obtain a high vacuum level inside the panel. In addition, sustaining the initial high vacuum level permanently is also very important. In the conventional packing technology using a tabulation method, it is not possible to obtain a satisfiable vacuum level for a proper operation. In case of FED, the poor vacuum level results in the increase of operating voltage for electron emission from field emitter tips and an arcing problem, resultantly shortening a life time. Furthermore, the reduction of a sealing process time in the PDP production is very important in respect of commercial product. The most probable method for obtaining the initial high vacuum level inside the space with such a miniature and complex geometry is a vacuum in-line sealing which seals two glass plates within a high vacuum chamber. The critical solution for the vacuum sealing is to develop a frit glass to avoid the bubbling or crack problems during the sealing process at high temperature of about $400^{\circ}C$ under the vacuum environment. In this study, the suitable frit power was developed using a mixture of vitreous and crystalline type frit powders, and a vacuum sealed CNT FED with 2 inch diagonal size was fabricated and successfully operated.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.961-966
• /
• 2012

고유가 시대를 맞아 에너지 절약이 사회적으로 이슈화됨에 따라 진공유리에 대한 관심이 높아지고 있다. 진공유리 개발을 위한 핵심 공정 중 유리모서리 접합공정은 두 장의 유리 사이를 진공으로 유지하기 위해 높은 신뢰도를 요한다. 본 논문에서는 유리 모서리 접합 시 기존 프릿을 이용하여 접합하는 방법과 달리 고밀도열원인 수소혼합가스를 이용하여 모서리를 접합하는 공정을 제시하였다. 또한 유리의 파손 및 변형방지를 위해 전기로내의 분위기 온도를 설정하고 균일도를 측정하였다. 기초시험을 통해 모서리접합 공정변수를 설정하고 공정변수에 따른 유리 모서리 접합부 면적과의 수학적관계식을 다중회귀분석으로 도출하였다.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.40-45
• /
• 2012

The glass edge sealing is one of the vacuum glazing core manufacturing process and it needs the high reliability for the vacuum keeping. Conventionally, the glass edge sealing had been being researched by the method that pasted the flit on the glass edge part and bonded two sheets of glass. But this way has the defect that can't make tempered glass. In order to remedy it's faults, in this paper, the glass edge was sealed by using the hydrogen mixture gas torch within the furnace. The parameter having an effect on the glass edge sealing through the basic test was set. And the correlation of the thickness of the glass edge and parameter were analyzed through the design of experiment. By using the Taguchi method, the optimal process condition for the glass edge sealing was drawn and the validity was verified.

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.436-439
• /
• 2006

This study was carried out to obtain basic information for optimum storage method of leaf, stem and root of Angelica acutiloba Radix, which is being utilized as major cultivated herbal medicine materials, root of Angelica acutiloba was stored for 3 months in different packing materials and sealing methods, such as punched packing, sealing and vacuum packing. The results are summarized as follows. The loss in weight as influenced by packing materials and sealing degree was the lowest at vacuum packing and complete sealing condition with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between polyethylene films, but it was significantly different between sealing conditions. Therefore, vacuum packing and complete sealing with polyethylene film are desirable storage condition for Angelica acutiloba Radix.

• Journal of Information Display
• /
• 제5권4호
• /
• pp.7-11
• /
• 2004

Effects of base vacuum level on the electrical and optical characteristics of the plasma display panel (PDP) were investigated. The relationship between efficiency and base vacuum level before filling discharge gas was analyzed. For the base vacuum level of $1{\times}10^{-4}$ torr, firing voltage of a 2-inch diagonal PDP panel was 232 V at the discharge gas pressure of 400 torr and luminous efficiency was 1.5 lm/W at 180V sustaining pulse. On the other hand for $1{\times}10^{-6}$torr, the firing voltage was reduced to 215 V and luminous efficiency was improved considerably to 2.5 lm/W. We successfully demonstrated the smooth operation of tip-less PDP fabricated using vacuum in-line sealing method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.709-710
• /
• 2012