• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.381.2-381.2
• /
• 2016

It was known conceptually that ferrofluid or air driven flows induced by waste heat energy could generate electric power in surrounding windings by changing the magnetic flux with time through the colis. In the last decade, a ferrohydrodynamics energy harvesting system based on magnetorheology has been investigated experimentally and numerically. However, it was focused on the movement of air droplets or nanoparticles in the ferrofluid, therefore the electric power generated in the device was not enough to use practically. In this study, we developed the electrical generation concept based on magnetic particle flows for harvesting large amount of electric power and conducted measurements and computations for verifying the concept of electrical generation. In order to obtain a significant amount of electrical energy by using magnetic particle flows, it was critical to control the magnetization direction of magnetic nanoparticles in the fluid by a permanent magnet and to change the magnetic flux with time by air bubbles when the fluid flows in a millimeter-sized channel passed through surrounding windings.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.209.2-209.2
• /
• 2016

Up to now, Plasma applications are thought as a leading technology in industrial, chemical and even medical and biological field. Especially, Due to direct discharge in liquid with reaction in ambient solution, plasma in liquid is useful plasma technology. Such as electro-surgery, water purification, radical generation for synthesis. For using those plasma applications efficiently, plasma characteristics should be understood in advance. But discharge in liquid is not much well-known about its characteristics. And plasma discharge in solution is difficult to generate and analysis due to electrolysis, vaporization and radical generation. So, We make stable plasma discharge in solution(saline 0.9%) without input gas. We also analyze new type of plasma source in thermal and electrochemical view. And we check characteristics of plasma in liquid. For example, plasma density and radical density(OH) with optical emission, thermal energy with thermometer, electrical energy with oscilloscope and so on. And we try to explain the bubble and plasma formation with circuit analysis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.420.1-420.1
• /
• 2016

Colloidal quantum dot (CQD) is emerging as a promising active material for next-generation solar cell applications because of its inexpensive and solution-processable characteristics as well as unique properties such as a tunable band-gap due to the quantum-size effect and multiple exciton generation. However, the most widely used spin-coating method for the formation of the quantum dot (QD) active layers is generally hard to be adopted for high productivity and large-area process. Instead, the spray-coating technique may potentially be utilized for high-throughput production of the CQD solar cells (CQDSCs) because it can be adapted to continuous process and large-area deposition on various substrates although the cell efficiency is still lower than that of the devices fabricated with spin-coating method. In this work, we observed that the subsequent treatment of two different ligands, halide ion and butanedithiol, on the lead sulfide (PbS) QD layer significantly enhanced the cell efficiency of the spray CQDSCs. The maximum power conversion efficiency was 5.3%, comparable to that of the spin-coating CQDSCs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.82-82
• /
• 2015

Industrial crystalline silicon (c-Si) solar cells with using a screen printing technology share the global market over 90% and they will continue to be the same for at least the next decade. It seems that the $2^{nd}$ generation and the $3^{rd}$ generation technologies have not yet demonstrated competitiveness in terms of performance and cost. In 2014, new world record efficiency 25.6% (Area-$143.7cm^2$, Voc-0.740V, $Jsc-41.8mA/cm^2$, FF-0.827) was announced from Panasonic and its cell structure is Back Contact $HIT^*$ c-Si solar cell. Here, amorphous silicon passivated contacts were newly applied to back contact solar cell. On the other hand, 24.9% $TOPCon^{**}$ cell was announced from Fraunhofer ISE and its key technology is an excellent passivation quality applying tunnel oxide (<2 nm) between metal and silicon or emitter and base. As a result, to realize high efficiency, high functional technologies are quite required to overcome a theoretical limitation of c-Si solar cell efficiency. In this presentation, Si solar cell technology summarized in the International Technology Roadmap for Photovoltaics ($^{***}ITRPV$ 2014) is introduced, and the present status of R&D associated with various c-Si solar cell technologies will be reviewed. In addition, national R&D projects of c-Si solar cells to be performed by Korea University are shown briefly.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.676-676
• /
• 2013

무기물 양자점을 광감응 염료로 사용하는 경우 양자점의 사이즈 조절만으로 밴드갭을 조절할 수 있어 광학적 특성 조절이 용이하며, 유기 염료보다 광흡수 능력이 뛰어난 장점을 가진다. 특히 카드뮴 계열의 CdS, CdSe 양자점을 순차적으로 증착하여 사용하는 경우 가시광 전 영역을 효율적으로 흡수, 이용할 수 있어 광전기화학 셀의 광전극으로 사용 시 높은 성능을 기대할 수 있다. 하지만, 카드뮴 계열 양자점의 경우 광전기화학 셀로의 구동에 있어 안정성이 낮은 문제점이 있으며, 이는 양자점에 남아있는 정공이 관여하는 양자점 부식 반응으로 인한 것이다. 본 연구에서는 보다 안정적이면서도 고효율의 광전기화학적 수소생산 시스템을 위해, CdSe/CdS 양자점 감응형 ZnO 나노선 광전극에 IrO2 촉매물질을 증착하였다. CdSe/CdS 양자점이 가시광 전 영역을 흡수하며, ZnO 나노선 구조를 통해 생성된 광전자를 효율적으로 포집하여 높은 광전류 특성을 기대할 수 있다. 나아가 산소생산용 조촉매로 많이 사용하는 $IrO_2$ 촉매 물질의 추가증착을 통해 양자점에서 생긴 정공을 빼 줌으로서 정공이 관여하는 양자점 부식 반응을 방지할 수 있다. 실험결과 촉매물질의 증착 이후 광전류 생성 특성 및 수소생산량이 증가하였으며, 안정성 또한 상당히 향상된 것을 확인할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.639-639
• /
• 2013

In this research we report the significant contribution of the as-spun multi-walled carbon nanotube (MWCNT) on the x-ray images formation using a low tube voltage x-ray source. The MWCNT, which was used for the fabrication of the spun CNT, was grown using a microwave plasma-enhanced chemical vapor deposition machine. Electrical-optics simulation software was utilized to determine the electron field emission trajectory of the triode-structure-as-spun CNT-based x-ray source. It was shown that a significant amount of converging electrons hit the target anode producing a clear x-ray image. These x-ray images where produced at a small amount of anode current of 0.67 mA at a tube voltage of 5 kV with the gate voltage of 0 V. Also, comparisons of the radiographs at various exposure times of the sample where analyzed with and without an x-ray dose filter. Results showed that spatially-resolved images were formed using the as-spun CNT at a low tube voltage with a $54-{\mu}m$ Al x-ray filter. This study can be used for low-voltage medical applications.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.428-435
• /
• 2000

정전 탐침을 이용하여 유도 결합형 반응기에서 발생하는 산소 플라즈마의 음이온 발생 특성을 관찰하였다. 입력전력과 운전압력 조건에 따른 산소 플라즈마에서 electronegative 음이온 플라즈마의 입력전력과 운전압력에 따른 정전 탐침에 흐르는 포화 양 전류 대 포화 음 전류(전자 전류와 음 이온 전류의 합)의 전류 비율과 플라즈마 부유 전위와 플라즈마 전위 차의 변화로부터 음이온 발생 특성관찰을 하였다. 전류비의 증가와 전위차 값의 감소는 입력전력이 증가함에 따라 약 30∼60 mTorr 운전압력 영역에서 나타났으며 이 조건에서 음이온의 발생량이 증가함을 의미하고, 플라즈마내의 이온들은 음이온과 재결합에 의한 손실이 증가하여 플라즈마 밀도가 감소함을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.240.2-240.2
• /
• 2013

The device scale of flash memory was confronted with quantum mechanical limitation. The next generation memory device will be required a break-through for the device scaling problem. Especially, graphene is one of important materials to overcome scaling and operation problem for the memory device, because ofthe high carrier mobility, the mechanicalflexibility, the one atomic layer thick and versatile chemistry. We demonstrate the hybrid memory consisted with the metal-oxide quantum dots and the mono-layered graphene which was transferred to $SiO_2$ (5 nm)/Si substrate. The 5-nm thick secondary $SiO_2$ layer was deposited on the mono-layered graphene by using ultra-high vacuum sputtering system which base pressure is about $1{\times}10^{-10}$ Torr. The $In_2O_3$ quantum dots were distributed on the secondary $SiO_2$2 layer after chemical reaction between deposited In layer and polyamic acid layer through soft baking at $125^{\circ}C$ for 30 min and curing process at $400^{\circ}C$ for 1 hr by using the furnace in $N_2$ ambient. The memory devices with the $In_2O_3$ quantum dots on graphene monolayer between $SiO_2$ thin films have demonstrated and evaluated for the application of next generation nonvolatile memory device. We will discuss the electrical properties to understating memory effect related with quantum mechanical transport between the $In_2O_3$ quantum dots and the Fermi level of graphene layer.

• Applied Science and Convergence Technology
• /
• 제26권5호
• /
• pp.110-113
• /
• 2017

The two-dimensional layered $MoS_2$ has high mobility and excellent optical properties, and there has been much research on the methods for using this for next generation electronics. $MoS_2$ is similar to graphene in that there is comparatively weak bonding through Van der Waals covalent bonding in the substrate-$MoS_2$ and $MoS_2-MoS_2$ heteromaterial as well in the layer-by-layer structure. So, on the monatomic level, $MoS_2$ can easily be exfoliated physically or chemically. During the $MoS_2$ field-effect transistor fabrication process of photolithography, when using water, the water infiltrates into the substrate-$MoS_2$ gap, and leads to the problem of a rapid decline in the material's yield. To solve this problem, an epoxy-based, as opposed to a water-based photoresist, was used in the photolithography process. In this research, a hydrophobic $MoS_2$ field effect transistor (FET) was fabricated on a hydrophilic $SiO_2$ substrate via chemical vapor deposition CVD. To solve the problem of $MoS_2$ exfoliation that occurs in water-based photolithography, a PPMA sacrificial layer and SU-8 2002 were used, and a $MoS_2$ film FET was successfully created. To minimize Ohmic contact resistance, rapid thermal annealing was used, and then electronic properties were measured.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.369-369
• /
• 2016

A nanostructure composite is a highly suitable substance for photoacoustic ultrasound generation. This allows an input laser beam (typically, nanosecond pulse duration) to be efficiently converted to an ultrasonic output with tens-of-MHz frequency. This type of energy converter has been demonstrated by using a carbon nanotube (CNT)-polydimethylsiloxane (PDMS) composite film that exhibit high optical absorption, rapid heat transition, and mechanical durability, all of which are necessary properties for high-amplitude ultrasound generation. In order to develop the CNT-PDMS composite film, a high-temperature chemical vapor deposition (HTCVD) method has been commonly used so far to grow CNT and then produce a CNT-PDMS composite structure. Here, instead of the complex HTCVD, we use a mixed solution of hydrophobic multi-walled CNT and dimethylformamid (DMF) and fabricate a solution-processed CNT-PDMS composite film over a spherically concave substrate, i.e. a focal energy converter. As the solution process can be applied over a large area, we could easily fabricate the focal transmitter that focuses the photoacoustic output at the moment of generation from the CNT-PDMS composite layer. With this method, we developed photoacoustic energy converters with a large diameter (>25 mm) and a long focal length (several cm). The lens performance was characterized in terms of output pressure amplitude for an incident pulsed laser energy and focal spot dimension in both lateral and axial. Due to the long focal length, we expect that the new lens can be applied for long-range ultrasonic treatment, e.g. biomedical therapy.