• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.97-102
• /
• 2006

Anodic alumina with self-organized and ordered nano hole arrays can be a good candidate of an irradiation mask to modify the properties of nano-scale region. In order to try using porous anodic alumina as a mask for ion-beam patterning, ion beam transmittance of anodic alumina was tested. 4 Um thick self-standing AAO templates anodized from Al bulk foil with two different aspect ratio, 200:1 and 100:1, were aligned about incident ion beam with finely controllable goniometer. At the best alignment, the transmittance of the AAO with aspect ratio of 200:1 and 100:1 were $10^{-8}\;and\;10^{-4}$, respectively. However transmittance of the thin film AAO with low aspect ratio, 5:1, were remarkably improved to 0.67. The ion beam transmittance of self-standing porous alumina with a thickness larger than $4{\mu}m$ is extremely low owing to high aspect ratio of nano hole and charging effect, even at a precise beam alignment to the direction of nano hole. $SiO_2$ nano dot array was formed by ion irradiation into thin film AAO on $SiO_2$ film. This was confirmed by scanning electron microscopy that the $SiO_2$ nano dot array is similar to AAO hole array.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.2
• /
• pp.41-48
• /
• 2020

In this study, organic carbon was extracted from the condensed water of food waste drying process to estimate the applicability as external organic carbon sources. The COD, TN, TP and TS of condensed water were 21,374 mg/L, 148 mg/L, 4.19 mg/L, and 455.7 mg/L, respectively. In addition, the content of biodegradable organics in condensed water was 47%. The fractional distillation and the vacuum evaporation were employed for extracting organic carbon. There were 8 extraction conditions, but 4 conditions were available for extraction. They were 1) 0mmHg, 110℃ 2) -600mmHg, 70℃ 3) -500mmHg, 80℃ 4) -600mmHg, 80℃. All 4 conditions showed the highest organic concentration and the highest quantity of organics when extracted 10% of initial volume. It was estimated that optimum conditions were 80℃, -600mmHg and 10% extraction. Then, extraction concentration, extraction quantity, extraction efficiency, extraction time, BOD/TCOD ratio, TVFAs/TCOD ratio and NH₃-N were 174,200 mg/L, 8,710 mg, 46%, 10 min, 0.97, 0.74 and 75.5 mg/L respectively. Therefore, the extracted organic carbon can be utilized as external organic carbon sources.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.107-112
• /
• 1994

The phase transition and the surface and interface morphologies of $TiSi_2$ formed on atomically clean Si substrates are investigated. 200$\AA$ Ti and 400$\AA$ Si films on Si(ll1) have been codeposited at elevated temperatures (400~$800^{\circ}C$) in ultrahigh vacuum. The phase transition of TiSiL is characterized with using XRD. The results distinguish the formation of the C49 and C54 crystalline titanium silicides. The surface and interface morphologies of titanium silicides have been examined with SEM and TEM. A relatively smootb surface is observed for the C49 phase while a rough surface and interface are observed for C54 phase. The islanding of the C54 phase becomes severe at high temperature ($800^{\circ}C$). Islands of TiSiL have been observed at temperatures above $700^{\circ}C$ but no islands are observed at temperatures below $600^{\circ}C$. For films deposited at $400^{\circ}C$ and 500%. weak XRD peaks corresponding to TiSi were observed and TEM micrographs exhibited small crystalline regions of titanium silicide at the interface.

• Korean Journal of Human Ecology
• /
• v.5 no.2
• /
• pp.55-74
• /
• 2002

This study, observing each respectively packaged Kongdduk during 12-day storing period and comparing it with unpackaged Kongdduk, through a cross-sectional view of its fiber and temperament, through a sensory evaluation rheometer measurement of rheological change depending on storing period and packaging type and through the organic acid content, micro-organic change, and retrogressive process. The results are as follows: 1. Kongdduk made of bean oil shows better chewiness, cohesiveness, and moistness than Kongdduk made of bean flour while Kongdduk made of bean flour shows better rheological properties as to roasted nutty taste or roasted nutty order. 2. The test of the cutted loaves of Kongdduk shows that adding oil of proper proportion to the dough of steamed rice cake in accordance with the amount of rice flour has a good influence on rheological properties of softness. 3. Rice cakes were prepared by addition of yellow soybean flour or peanut flour and packaged with CMP or VP, and their physical characteristics were monitored by sensory evaluation and mechanical measurement while storing for 6 days. For VP samples, yellow soybean rice cake showed little changes in cohesiveness, moistness and chewiness for 6 days of storage, while pure rice cake and peanut rice cake showed an increase in strength and hardness from the 4th day of storage. In case of CMP, yellow soybean rice cake hardly showed a difference in cohesiveness, moistness and chewiness for 6 days, while pure rice cake and peanut rice cake showed a significant difference from the 4th day in sensory evaluation. 4. For rheometer measurement, yellow soybean rice cake with CMP or VP showed little changes in strength or hardness for 6 days, while peanut rice cake and pure rice cake showed a drastic decrease in cohesiveness, from the End day and adhesiveness from the 4th day of storage. As there was no remarkable difference or deterioration for 6 days of storage in yellow soybean rice cake between CMP and VP, the ingredients of rice cakeappeared to be more important than the type of packaging in terms of quality deterioration of rice cake. 5. As the storing period passed by, organic acid is detected less at CMP-packaged Knngdduk than at wrapped. and its increasing speed proves to be slower as well. 6. The one wrapped with plyethylene film began to get moldy from pure rice cake or Kongdduk (rice cake mixed with yellow soybean or peanut) after 6 days, and more and more modly after 9 daysor after 12 days, but the CMP-packaged ones didn't get modly until 12 days or more. 7. CMP-packaged Kongdduk showed higher enthalpy of retrogradation than PE-wrapped one. As storing Period Passed by, Kongdduk,s enthalpy grew high. That is to say, it shows that Kongdduk got retrograded.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.24-32
• /
• 1984

In order to process instant foods which hold appropriate moisture contents and soft texture, four kinds of retort pouched seasoned-oyster products were prepared as control, seasoned products, solid smoked and liquid smoked product after seasoning and their processing conditions and quality stability during 100 days of storage were investigated. The optimum processing conditions of retort pouched seasoned-oyster product were as follows ; namely, raw oyster was seasoned at $105^{\circ}C$ for 10 min with seasoning solution prepared from sugar, sorbitol, salt, monosodium glutamate and 5'-ribonucleotide and then dipped for 30 seconds in Smoke-EZ solution(Alpha Foods Co., Ltd.) after predried for 30 min in hot-air drier. After. smoking, the seasoned and liquid smoked oyster was dried at $40-42^{\circ}C$ for 2.5 hours, vacuum packed in plastic film bag, and sterilized in a hot water circulating retort at $120^{\circ}C$ for 16 min. Comparing their quality before and after sterilization, TBA value of all the products after sterilization slightly decreased and among texture profiles hardness, toughness and chewiness slightly decreased, while elasticity and cohesiveness were rarely changed. Color value (a value) of the product treated with solid smoke or liquid smoke increased after sterilization. During storage pH, VBM and water activity of all products changed little and TBA values of the solid smoked product and liquid smoked one were lower than that of the others. Viable cell count was negative and texture changed little during storage. As for color difference during storage, green meat appeared on the surface of control and seasoned product after 15 days storage, while the masking of green meat could achieved by solid and liquid smoking treatment. And liquid smelling treatment was more effective than solid smoking. As a conclusion, retort pouched seasoned-oyster product treated with liquid smoke kept their good quality during 100 days storage and it seemed to be consumed as one of the instant foods which hold appropriate moisture contents and soft texture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.407-410
• /
• 2018

As the operating frequency of an electromagnetic wave increases, the maximum output and wavelength of the wave decreases, so that the size of the circuit cannot be reduced. As a result, the fabrication of a circuit with high power (of the order of or greater than kW range) and terahertz wave frequency band is limited, due to the problem of circuit size, to the order of ${\mu}m$ to mm. In order to overcome these limitations, we propose a source design technique for 0.1 THz~0.3 GW level with cylindrical shape (diameter ~2.4 cm). Modeling and computational simulations were performed to optimize the design of the high-power electromagnetic sources based on Cherenkov radiation generation technology using the principle of plasma wakefield acceleration with ponderomotive force and artificial dielectrics. An effective design guideline has been proposed to facilitate the fabrication of high-power terahertz wave vacuum devices of large diameter that are less restricted in circuit size through objective verification.

• Korean Journal of Plant Resources
• /
• v.26 no.4
• /
• pp.411-416
• /
• 2013

This study was conducted not only to analyze ${\alpha}$-glucosidase inhibition activity with fronds and rhizomes of nine Pteridophyte species, but also to select the plant materials suitable for natural ${\alpha}$-glucosidase inhibitor. Harvested rhizomes and fronds were washed, freeze-dried and grinded. After conducting ultrasonification extraction for 30 minutes in ultrasonic water tank with 100% methanol solvent, and vacuum filtration, ${\alpha}$-glucosidase inhibition activity was measured. Acarbose was used as the positive control. After mixing $100{\mu}L$ of 0.7 unit ${\alpha}$-glucosidase enzyme solution into $50{\mu}L$ of extract and reacting them at $37^{\circ}C$ for 10 minutes, $50{\mu}L$ of 1.5 mM ${\rho}$-NPG solution was taken and reacted at $37^{\circ}C$ for 20 minutes. The reaction was stopped with 1 mL of 1 M $Na_2CO_3$ and absorbance was measured in 405 nm. With the regression analysis, the content of solubility solids (the value of $IC_{50}$) which can inhibit 50% of 0.7 unit ${\alpha}$-glucosidase solution's activity was investigated. The frond ($IC_{50}=14.00{\sim}913.33{\mu}g{\cdot}mL^{-1}$) and rhizome extracts ($IC_{50}=12.93{\sim}205.84{\mu}g{\cdot}mL^{-1}$) of nine Pteridophyte species showed higher ${\alpha}$-glucosidase inhibition activity in comparison with acarbose ($IC_{50}=1413.70{\mu}g{\cdot}mL^{-1}$). The extracts of fronds and rhizomes showed higher value than acarbose by 1.55~100.98 and 6.87~109.33 times each. Especially, ${\alpha}$-glucosidase inhibition activities of Pyrrosia lingua in fronds and Osmunda cinnamomea var. fokiensis in rhizomes were the highest. The necessary biomass of fronds and rhizomes for inhibiting 50% of ${\alpha}$-glucosidase activity showed the lowest value, 0.35, 0.27 mg each, in O. cinnamomea var. fokiensis. $IC_{50}$ value of P. lingua was the highest among fronds of nine Pteridophyte species, but content of soluble solids was 2.4 times less than O. cinnamomea var. fokiensis. So frond of O. cinnamomea var. fokiensis is more economic in comparison with P. lingua. As the result of this study, O. cinnamomea var. fokiensis showed high ${\alpha}$-glucosidase inhibition activity even with small biomass. Therefore it was considered to be high-valued economic material as natural ${\alpha}$-glucosidase inhibitor.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.831-836
• /
• 1998

The B1914 Ni-base superalloy was manufactured according to crystal structures of poly-, directionally solidified- and single crystals. We observe deformation as type of different crystal structure from room to high temperature. Specimens are controled by cooling rate and thermal gradient and then heat treatment in vacuum and then cooling with Ar gas. Different crystal structure has different stress-strain characteristic. At $600^{\circ}C$, yield strength and ultimate strength is increased single-, directionally solidified- and poly crystals in order.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.351-361
• /
• 2007

The samples composed of a GST thin film and the protective layers of $ZnS-SiO_2$ or $Al_2O_3$ coated on c-Si substrate were prepared by using the magnetron sputtering method. Samples of three different structures were prepared, that is, i) the GST single film on c-Si substrate, ii) the GST film sandwiched by the protective $ZnS-SiO_2$ layers on c-Si substrate, and iii) the GST film sandwiched by $Al_2O_3$ protective layers on c-Si substrate. The ellipsometric constants in the temperature range from room temperature to $700^{\circ}C$ were obtained by using the in-situ ellipsometer equipped with a conventional heating chamber. The measured ellipsometric constants show strong variations versus temperature. The variation of ellipsometric constants at the temperature region higher than $300^{\circ}C$ shows different behaviors as the ambient medium is changed from in air to in vacuum or the protective layers are changed from $ZnS-SiO_2$ to $Al_2O_3$. Since the long heating time of 1-2 hours is believed to be the origin of the high temperature variation of ellipsometric constants upon the heating environment and the protective layers, a PRAM (Phase-Change Random Access Memory) recorder is introduced to reduce the heating time drastically. By using the PRAM recorder, the GST samples are heated up to $700^{\circ}C$ decomposed preventing its partial evaporation or chemical reactions with adjacent protective layers. The surface image obtained by SEM and the surface micro-roughness verified by AFM also confirmed that samples prepared by the PRAM recorder have smoother surface than the samples prepared by using the conventional heater.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.979-995
• /
• 1997

The purpose of this study was to identify the preventive and the progressive inhibitory effects of enamel demineralization with fluoride releasing light-and self-cured orthodontic sealants(FluoroBond), in vitro, under the polarizing light microscope and the scanning electon microscope. The polarizing light microscopic group was subdivided into seven groups(Group A-Group G). The scanning electron microscopic group was also subdivided into seven groups(Group A'-Goup G'). For polarizing light microscopic evaluation, longitudinal sections were made longitudinally by Maruto cutter(Maruto Co., Japan) and Maruto grinding machine(Maruto Co., Japan). Sections were examined and photographed by the polarizing light microscope(Olympus Optical Co., Japan) using crossed polars and with the enamel rod longitudinal axis oriented at $45^{\circ}$ to the extinction position. For scanning electron microscopic evaluation, the specimens were coated with a highly conducting layer of gold palladium in a model Hus-4 high-vacuum evaporator and examined in an ISI-100B scanning electron microcope operated at 20kV. The results of this study were as follows : 1. The mean depths of artificial carious lesions under a polarized light microscope were $Group\;A(5.08{\mu}m),\;Group\;B(47.82{\mu}m,\;Group\;C(8.42{\mu}m),\;Group\;D(7.20{\mu}m),\;Group\;E(85.41{\mu}m),\;Group\;F(60.38{\mu}m),\;Group\;G(60.13{\mu}m)$. 2. There were statistically significant differences in Group B compared with Group A, C, and D(p<0.05), and also, in Group I compared with Group F and Group G(p<0.05). 3. Light-and self-cured orthodontic sealants had the preventive effects of enamel demineralization. 4. Light-and self-cured orthodontic sealants had the progressive inhibitory effects of enamel demineralization. 5. The time progress of demineralizing agent had no influence on the samples of light-and self-cured orthodontic sealants under the scanning electron microscope. 6. There was no difference between the specimens of light-and self-cured orthodontic sealants both in the polarized light microscopic group and in the scanning electron microscopic group.