• 한국진공학회지
• /
• 제5권4호
• /
• pp.333-340
• /
• 1996

Cu 확산방지막으로서의 Tin의 특성을 면저항 특정, X선 회절 분석, SEM, AES, capacitance-voltage(C-V) 측정에 의하여 평가하고, Cu의 확산을 민감하게 알아내는 정도를 특성 평가 방법간에 비교하였다. 여러 가지 증착방법에 의하여 Cu/TiN/Ti/SiO2/Si 구조의 다층 박막시편을 제작하였으며, 이 시편을 10% H2/90% Ar분위기, 열처리 온도 500~$800{\circ}C$ 범위에서 2시간 동안 열처리하였다. TiN의 Cu 확산방지 효과가 소멸된 경우 Cu 박막 표면에서 불규칙한 모양의 spot을 관찰할 수 있었으며 outdiffusion된 Si를 검출할 수 있었다. MOS capacitor의 C-V 특성은 열처리 온도에 따라 급격하게 변화하였다. C-V 측정에서 inversion capacitance는 열처리 온도 500~$700^{\circ}C$범위에서 열처리 온도가 높아질수록 감소하다가 $800^{\circ}C$에서 크게 증가하였으며, 이러한 특성의 변화는 TiN을 통해서 $SiO_2$와 Si내로 확산된 Cu에 의하여 발생되는 것으로 생각된다.

• Journal of Microbiology and Biotechnology
• /
• 제4권4호
• /
• pp.316-321
• /
• 1994

We investigated the possibility of industrial application and economit process of high temperature fermentation by thermotolerant alcohol producing yeasts as previously reported. From the 20% glucose media, the RA-74-2 produced 11.8% (v/v) ethanol at $32^{\circ}C$ (0.5% inoculum) and 10.6% (v/v) ethanol at $40^{\circ}C$ (3% inoculum), respectively. Also, 11.3% (v/v) ethanol was produced for 96 hours in the temperature-gradient fermentation. These results suggest that the RA-74-2 could isuccessfully be applied to save the cooling water and energy in industrial scale without re-investment or modification of established fermentation systems. When potato starch was used as the substrate for the RA-74-2, high temperature fermentation above $40^{\circ}C$ was more appropriate for industrial utilization because organic nitrogen was not necessary to economical fermentation. As the naked barley media just prior to industrial inoculation, taken from the Poongkuk alcohol industry Co., were used, 9.6% (v/v) ethanol was produced at $40^{\circ}C$ for 48 hours in jar-fermentor scale (actually, 9.5-9.8% (v/v) ethanol was produced at 30~$32^{\circ}C$ for 100 hours in industrial scale). The ethanol productivity was increased by the high glucoamylase activity as well as the high metabolic ratio at $40^{\circ}C$ Therefore, if the thermotolerant yeast RA-74-2 would be used in industrial scale, we could obtain a high productivity and saving of the cooling water and energy. Meanwhile, the RA-912 produced 6%(v/v) ethanol in 10% glucose media at $45^{\circ}C$ and showed the less ethanol-tolerance compared with industrial strains. As the produced alcohol was recovered by the vacuum evaporator at $45^{\circ}C$ in 15% glucose media, the final fermentation ratio was enhanced (76% of theoretical yields). This suggest that a hyperproductive process could be achieved by a continuous input of the substrate and continuous recovery of the product under vacuum in high cell-density culture.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.111-115
• /
• 2003

200nm 정도의 두께를 가진 SBT 박막이 liquid delivery MOCVD 공정에 의해 (111) oriented Pt/Ti/$SiO_2$/Si 기판 위에 증착되었다 이 실험에서는 $Sr(TMHD)_2$tetraglyme, $Bi(ph)_3$ 그리고 $Ta(O^iPr)_4$(TMHD)를 출발 물질로 사용하였다. Sr 출발 물질의 열적 안정화를 위해서 adduct로 tetraglyme를 사용하여 실험하였고 유기 용매로는 n-butyl acetate를 사용하였다 Substrate temperature와 reactor pressure는 각각 $570^{\circ}C$와 5Torr로 유지시켰다. 또한 vaporizer의 용도는 $190-200^{\circ}C$, 그리고 delivery line 의 온도는 vaporizer 보다 높게 유지 $(220-230^{\circ}C)$하여 출발 용액을 분당 0.1ml로 50분간 주입하였다. 수송가스로 Ar, 산화제로 $O_2$ 가스를 사용하였다. 제조한 SBT 박막은 $750^{\circ}C$에서 열처리한 후 인가전압 3V와 5V에서 $2P_r$값이 각각 6.47, $8.98{\mu}C/cm^2$이었으며, $2E_c$값은 인가전압 3V와 5V에서 각각 2.05, 2.31V이었다 그리고 $800^{\circ}C$에서는$750^{\circ}C$에서 열처리한 SBT 박막보다 다소 우수한 이력특성을 나타내어 $2P_r$ 값은 인가전압 3V와 5V에서 각각 7.59, $10.18{\mu}C/cm^2$ 이었으며, $2E_c$값은 인가 전압 3V와 5V에서 각각 2.00, 2.21V 이었다.

• Geomechanics and Engineering
• /
• 제6권6호
• /
• pp.577-592
• /
• 2014

The methods for estimating in-situ hydraulic conductivity ($k_{hp}$) and coefficient of consolidation ($c_{hp}$) in the horizontal direction from piezocone penetration and dissipation test results have been investigated using test results at two sites in Saga, Japan. At the two sites the laboratory values of hydraulic conductivity ($k_v$) and coefficient of consolidation ($c_v$) in the vertical direction are also available. Comparing $k_{hp}$ with $k_v$ and $c_{hp}$ with $k_v$ values, suitable methods for estimating $k_{hp}$ and $c_{hp}$ values are recommended. For the two sites, where $k_{hp}{\approx}k_v$ and $c_{hp}{\approx}2c_v$. It is suggested that the estimated values of $k_{hp}$ and $c_{hp}$ can be used in engineering design.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.17-26
• /
• 2007

본 연구에서는 수증기댐처리 또는 횡단면 코팅처리 등이 오동나무 장고용 초갈이재의 송풍오븐건조 특성에 미치는 영향을 구명코저하였다. 건조개시 직후의 중량감소량은 무처리(C-NC treatment), 엔드코팅처리(C-CO treatment), 수증기댐처리(V-NC treatment), 수증기댐-엔드코팅처리(V-CO treatment)재의 순으로 크게 나타났다. V-CO처리재는 V-NC처리재와 비교하여 전(全)건조기간에 걸쳐 더 완만한 온도경사를 보였으며 내층과 외층간에 온도경사가 거의 존재하지 않았다. C-CO처리재의 경우 C-NC처리재와 비교하여 건조중기까지는 외층과 내층의 수증기압 모두가, 그리고 건조중기 이후에는 내층의 수증기압이 더 높게 나타났다. V-CO처리재의 경우 건조초기에는 V-NC처리재와 유사한 분포를 보였으나, 건조초기 이후 통공, 외층, 내층의 순으로 절대수증기압이 큰 분포를 보이면서 V-NC처리재와는 전혀 다른 분포모형이 관찰되었다. 재면할렬과 윤할은 모든 처리재에서 전혀 발생하지 않았으나 엔드코팅을 실시하지 않은 C-NC와 V-NC에서는 횡단면할렬이 심하게 발생하였다.

• 충청수학회지
• /
• 제24권3호
• /
• pp.609-616
• /
• 2011

Observing that $vX{\times}vY$ is a Wallman realcompactification of $X{\times}Y$ if $v(X{\times}vY)=vX{\times}vY$, we show that $v(X{\times}Y)=vX{\times}vY$ if and only if $X{\times}Y$ is z-embedded in $vX{\times}vY$ and $vX{\times}vY$ is a Wallman compactification of $X{\times}Y$.

• 한국자원식물학회지
• /
• 제19권6호
• /
• pp.700-705
• /
• 2006

Present studies were performed to determine the physiology of seed germination in Viola species native to Korea. Twelve species, 1 variety and 1 form were collected, classified and used as materials: V. collina, V. blandaefomis, V. rosii, V. chaerophylloides, V. phalacrocarpa, V. patrinii, V. mandshurica, V. mandshurica for. albescence, V. seoulensis, V. yedoensis, V. keiskei, V. variegata, V. variegata var. chinensis, and V. verecunda. V. tricolor 'Helen Mount' was also used to compare wild with cultivated species. In order to investigate the effect of temperature on seed germination, seeds stored at $4{\pm}2^{\circ}C$ for 10 months or 4 years were incubated at 10, 15, 20, $25^{\circ}C$ under 16h illumination with 4 replicates per treatment. Seeds which had not germinated at $10^{\circ}C$ were transferred to $30^{\circ}C$ to assess the effect of temperature change in germination. Germination percent and the days of first, 40% and 80% germination were assessed. Capability of seed germination varied with taxon; Species belonging to subsection Patellares had high ability of germination, compared to species in the other subsections, and series Chinensis was the best among subsection Patellares. Species capable of high germination germinated in all temperatures with reasonably high germination rate, but the other species responded sensitively to temperature with different germination patterns. Higher the temperature, shorter the incubation time required for first, 40% and 80% of germination. Therefore, high temperature was effective in almost all species, not only for inducing high rate of germination but also the uniformity of germination. Temperature change from $10^{\circ}C\;to\;30^{\circ}C$ had a positive effect on seed germination.

• 한국주조공학회지
• /
• 제18권4호
• /
• pp.340-348
• /
• 1998

C/V graphite iron has superior tensile strength, toughness and ductility than grey iron, and better castability than ductile iron. The retained austenite content of C/V graphite iron by austempering treatment affects on the mechanical properties such as ductility, hardness, wear properties and machinability. C/V graphite iron alloyed with Cu and Mo were carried out on the austenitizing at $900^{\circ}C$ for 1 hour, and the austempering at $240{\sim}400^{\circ}C$ for 1 hr. And then the mechanical and wear properties of austempered C/V graphite iron have been investigated by the retained austenite content. In consequence, the retained austenite content was found to be 18.2% in austempering temperature at $240^{\circ}C$, and was increased 39.2% at $400^{\circ}C$. Tensile strength and hardness of austempered C/V graphite iron were decreased as the retained austenite content increased, but elongation was increased. The rolling wear loss were increased as the retained austenite content increased. The wear surface of as-cast became to be rough. The microstructure of austempered C/V graphite iron was became to be acicular ausferrite in austempering at $240^{\circ}C$, and feathery ausferrite at $400^{\circ}C$.

• Archives of Plastic Surgery
• /
• 제34권5호
• /
• pp.653-655
• /
• 2007

Purpose: The umbilicus is an important aesthetic component of the abdomen. Its absence is both cosmetically and psychologically distressing to the patient. Umbilical reconstruction should always be aimed at creating an umbilicus of sufficient depth and good morphology with less scarring. The C-V flap developed for nipple reconstruction was used in an inverted fashion in case of umbilical reconstruction. The aim of this article is to report our experience of scarred umbilical reconstruction using inverted C-V flap. Methods: A 22-year-old woman presented with contracted scar tissue in the umbilical region because she had undergone surgical correction of an umbilical hernia at 5 year of age. Pedicle of the inverted C-V flap was based cephalically. For enhancing depth of the umbilicus, three anchoring sutures to linea alba were done at both lateral and caudal aspects of the umbilical tube. Primary closures were done at donor sites of the V flaps and bolster sutures were done in the caudal direction of the inverted umbilical tube. Results: The patient was satisfied with the appearance of umbilicus. Major complications such as dehiscence, infection, and delayed healing did not occur. Conclusion: The inverted C-V flap is easy and simple technique, and it can produce a satisfactory reconstruction of umbilical structure.

• 약학회지
• /
• 제40권2호
• /
• pp.193-201
• /
• 1996

In order to study the role of C-terminal aromatic region of T4 endonuclease V in the interaction with substrate DNA, NMR and Fluorescence spectrum were recorded. Analysis of flu orescence emission spectra showed that C-terminal region of T4 endonuclease V is in or very near the binding site. In the HSQC spectrum of $^{15}N$-Tyr-labeled T4 endonuclease V*DNA complex, the broadening of a peak was observed. It is presumed that this peak corresponds to one among three tyrosine residues which belong to the WYKYY segment of C-terminal region of T4 endonuclease V. Interactions of peptide fragments consisting of C-terminal residues of T4 endonuclease V with DNAs(TT-, T^T-DNA) were investigated by NMR and Fluorescence experiment. The results suggest that two peptide fragments themselves bind to DNAs and their binding pattern is not an intercalation mode.