• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.296-299
• /
• 2008

In the present research, the exclusive analysis system based on the CFD method were suggested to predict the fire-suppression performance of water mist fire-suppression equipments for design applications. The computing scope is ranged from starting pump to fire-suppression equipments, composed of three parts that calculation of flow rate and pressure distribution at each nozzle, examining of spray performance and predicting of fire-suppression performance in the fire space. Application were done to the fire-suppression system for electric power generation plants. The results were analyzed by comparison between numerical results and initial design conditions in terms of thermal and fluid mechanics.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.723-730
• /
• 2013

Due to the event of hazardous chemical injection into a water storage tank in Hongseong, Chungcheongnam-do in 2012, the Korean Ministry of Environment has revised the enforcement rules of the Water Supply and Waterworks Installation Act to install surveillance equipments such as closed-circuit television(CCTV). However, the enforcement rules still do not provide concrete provision for installation of physical security equipments. Thus we studied vulnerability of small-scale water supplies in Korea and developed guidelines for the physical security system of the facilities. The guidelines include selection and recommendation of the physical security approaches and measures to detect, delay and response to the presence of an intruder in small-scale water supplies. The security features include protection utilities(e.g., fencing and fence topping), exterior intrusion detectors and alarms, locks and padlocks, surveillance utilities(e.g., CCTV), and others.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.784-785
• /
• 2010

전북대학교 고온플라즈마 응용연구센터 구축사업단에서는 MW급 초음속 플라즈마 풍동을 구축하고 있다. 구축되는 장비는 0.4MW/2.4MW급 Huels형 DC 플라즈마 장치 및 60kW/200kW급 RF 플라즈마 장치 등으로 구성되며 이러한 장비를 지원하는 공통지원설비가 별도로 구축되게 된다. 공통지원설비는 플라즈마 풍동을 구동하기 위한 수변전설비 및 가스공급설비, 냉각수공급설비, NOx 제거용 후처리 설비, 예비전원설비 등으로 구성되어 있다.

• 한국식품영양학회지
• /
• 제20권2호
• /
• pp.218-225
• /
• 2007

This study was conducted to investigate the satisfaction of school dietitians with foodservice facilities and utilities in the Chonbuk area of Korea. Self-administered questionnaires were collected from a total of 22 dietitians. Statistical data analysis was completed using the SPSS v. 10.0 program. The results are summarized as follows. Among the 222 school foodservice systems, 68.5% of the schools prepared meals the conventional way and 31.5% prepared them the commissary way. Most of the school foodservice facilities were located on the first floor. Satisfaction with the location of the foodservice facility was not significantly different between the conventional and commissary systems. However, overall dietitian satisfaction with the foodservice facility locations was poor. Approximately 30% of the dietitians responded that one of the most important problems for foodservice management was the limited space and worn-out equipments in the kitchens. For dietitians' satisfaction on the types of facilities present, most schools had constructed dietitian offices, food storage facilities, cafeterias, rest rooms, dressing rooms, and preparation facilities. Yet, the amenities most often missing were storage facilities, preparation facilities, dressing rooms, rest rooms, etc. For overall satisfaction with the status of facilities and utilities, we found no significant differences between dietitians in the conventional(2.89) and commissary foodservice systems(2.86); however, the satisfaction level among the dietitians was poor. Therefore, governmental regulation agencies need to review and approve plans prior to the new construction or extensive remodeling of school foodservice facilities. Finally, content analysis was also conducted regarding the dietitians' opinions on foodservice facilities and utilities.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.147-155
• /
• 2008

대부분의 화학공장에서는 유틸리티의 운용에 따라 경제성이 크게 좌우된다. 공장에서 이용되는 유틸리티는 중앙 집중화된 유틸리티 시스템에 의해 제공되는데 유틸리티 가운데 가장 큰 비중을 차지하는 것은 수증기로서 이의 효율적인 관리는 공장의 전력 및 용수의 수급에도 직접적인 영향을 미치게 된다. 이에 따라 대학교 4학년 학생 및 회사의 신입사원들이 유틸리티의 효율적 분배에 대한 개념을 바르고 신속하게 정립하고 실제 운전에 활용할 수 있도록 하는 것이 중요하다. OOUS(optimal operation of utility system)는 빠른 시간 내에 유틸리티, 특히 수증기의 효율적 생산과 최적 배분방법들을 학생들이나 신입사원들에게 교육시킬 수 있도록 구성된 시스템이다. OOUS에서는 다양한 유틸리티 관련장치 및 공정들을 다루고 있으며 유틸리티 관련 장치 모델과 운전지식 베이스를 기반으로 최적 운전조건이 제시되도록 함으로써 전체 유틸리티 플랜트의 조업 경비가 절감될 수 있도록 하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.177-179
• /
• 2018

After Fukushima nuclear accident at 2011, nuclear industrial has been focused on operation and maintenance phase, not design and construction phase. Continued good operating performance of nuclear power plants has been the best critical issue to nuclear utilities. Replacement for complete components as well as parts of components is being procured because nuclear utilities must maintain safety and reliability of operating nuclear power plants. However, many suppliers and manufacturers are giving up a nuclear quality assurance program under reduction in new construction of nuclear power plants. It is able to be increased difficulty in procuring spare parts to support operations and maintenance of nuclear power plants. Over 20% of nuclear power plant equipment in some countries is obsolete. Owing to obsolescence of nuclear safety-related items and/or withdrawing a nuclear quality assurance program of suppliers and manufactures, some replacement item and part might be procured to the item not covered by appendix B to USNRC 10 CFR Part 50. Under various methods of the nuclear repair and replacement methodology, utilities are supposed to establish a typical program for a repair and replacement of an electrical equipment and its parts in conjunction with a nuclear quality assurance. Concerning this typical program, this study suggests the repair and replacement methodology of electrical equipments used in nuclear power plants by procurement of a power supply, based on nuclear regulations, codes, standards, guidelines, specific and general technical information, etc..

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.196-197
• /
• 2006

Preventive maintenance can avail the generation utilities to reduce cost and gain more profit in a competitive supply-side power market. So, it is necessary to perform reliability analysis on the systems in which reliability is essential. In this paper, RCM (Reliability -Centered Maintenance) analytical method is adopted using real historical failure data in Korean power plants. Therefore, the reliability -based Probability model for predicting the failures of components in the power plant is also established, and application to FMECA(Failure Mode Effects and Critical Analysis) consideration of failure probability, Based on the weighting ranking of generating equipments which status to be probability estimation by FMECA. The FMECA is an engineering analysis and a core activity performed by reliability engineers to review the effects of probable failure modes of generating equipments and assemblies of the power system on system performance. The results of this paper show that application of FMECA with stochastic approach to the preventive maintenance can efficiently avail decreasing the cost on maintenance and hence improve the total benefit.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권2호
• /
• pp.90-98
• /
• 2003

Recently, the increasing application of electronic equipments and information devices has heightened the interest in power qualify. The term power quality is applied to a wide range of electromagnetic phenomena on the power system and is also concentrated by all areas such as utilities, their customers and suppliers of load equipments. In engineering terms, power Qualify is expressed by voltage qualify because the power supply system can only control the quality of the voltage. Therefore, the standards in power quality area are devoted to keep the supply voltage within allowable limits. This paper deals with single-phase unified power quality conditioner (UPQC), which ai s at the integration of series-active and shunt-active filter. The series filter il used to compensate for the voltage distortions and the shunt filter is used to provide reactive power and counteract the harmonic current injected by the load. Also, the voltage of the DC link capacitor is controlled to a desired value by the shunt active filter. The validity of the proposed UPQC is demonstrated using both the MATLAB/SIMULINK simulation and the experimental device with DSP (TMS320C32).

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.764-767
• /
• 2010

전북대학교 고온플라즈마 응용연구센터 구축사업단에서는 MW급 초음속 플라즈마 풍동을 구축하고 있다. 구축되는 장비는 0.4MW/2.4MW급 Huels형 DC 플라즈마 장치 및 60kW/200kW급 RF 플라즈마장치 등으로 구성되며 이러한 장비를 지원하는 공통지원설비가 별도로 구축되게 된다. 공통지원설비는 플라즈마 풍동을 구동하기 위한 수변전설비 및 가스공급설비, 냉각수공급설비, NOx 제거용 후처리 설비, 예비전원설비 등으로 구성되어 있다. 4기의 플라즈마 장치와 공통지원설비를 위한 건축물은 시험동, 연구동, 수변전동, 기체저장동, 냉각탑 기초로 구성되어 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.353-357
• /
• 2004

This paper presents the result of survey of case study for harmonics in electrical installations of buildings. Recently, many power electronic equipments(power converter, computers, air conditioners electronic ballasts for fluorescent lamps and so on) are used in office buildings, and harmonic current from them influence the other equipments in a distribution line. Notably, voltage distortion or voltage harmonics may approach or exceed is allowable level in power distribution system. Individual electric power consumers and end-users and responsible for reducing current harmonics while companies or utilities are responsible for reducing voltage harmonics at the point of common coupling in distribution system. As for harmonics, which one of the electric power qualities, it becomes important to obtain harmonic voltage/current distribution of the power system precisely because the use of power electronic apparatus in increasing. To suppress harmonics in electrical ins tallations of buildings, one of many methods suggest that resonance frequencies are controlled by modulating the capacities of high-voltage customer's capacitors.