• 제목/요약/키워드: using present conditions

검색결과 2,906건 처리시간 0.037초

생태계 모델에 의한 총허용 오염부하량 산정을 통한 연안해역의 수질관리 (Estimation of Total Allowable Pollutant Loads Using Eco-hydrodynamic Modeling for Water Quality Management on the Southern Coast of Korea)

  • 이대인;김종규
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제10권1호
    • /
    • pp.29-43
    • /
    • 2007
  • 한국 남해의 연안역(진해만에서 부산연안)에 있어서 효율적인 수질관리를 위해서, 3차원 생태-유체역학 모델을 적용하여 하계 수질을 예측하고, 목표 수질회복을 위한 오염부하 삭감량을 산정하였다. 현재의 오염부하량 조건하에서 연안해역의 수질(화학적 산소요구량과 영양염류 농도 등)은 설정된 해양환경수질기준을 초과하였고, 또한 부영양화 상태에 있기 때문에 유입하는 오염부하량의 저감이 필요하였다. 이러한 배경하에서, 모델이 적용되어 보정과 검증과정을 통해 연구해역의 유동장과 수질 분포를 유사하게 모의하였다. 시나리오 분석결과, 진해만 해역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$$COD\;3\;mg\;1^{-1}$ 이하를 동시에 만족하기 위해서는 육상 점오염원으로부터 90% 정도의 오염물질 저감뿐만 아니라, 장기간 오염물질의 유입으로 인한 베이스 농도 자체가 높아서 이를 저감하기 위한 퇴적물로부터 용출되는 질소와 인도 약 70% 정도 삭감해야 하는 것으로 나타났다. 낙동강 하구해역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$$COD\;2\;mg\;1^{-1}$ 이하를 만족하기 위해서는 낙동강 자체의 유입부하량을 약 80% 정도 저감해야 하며, 낙동강 하구해역을 제외한 부산 연안역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$$COD\;1\;mg\;1^{-1}$ 이하를 만족하기 위해서는 유입부하의 70% 정도의 삭감이 이루어져야 하는 것으로 예측되었다. 연구해역의 수질이 공간적으로 차이가 있으나 대체적으로 상당히 오염된 상황이라 이러한 삭감량은 매우 커서 현실적으로 단기간에 달성하기는 어려울 것이다. 그러므로 장기적인 관점에서 지속적인 노력 즉, 해역으로 유입하는 미처리된 오염물질 차단, 수처리시설의 확충과 제거 능력 향상 및 오염된 퇴적물 정화 등이 필요하다.

  • PDF

내부가열을 이용한 보장성어육(고등어) 연제품의 가공 및 제품개발에 관한 연구 2. 제품저장중의 품질변화 (Processing of Water Activity Controlled Fish Meat Paste by Dielectric Heating 2. Storage Stability of the Product)

  • 이강호;이병호;유병진;서재수;조진호;정인학;제외권
    • 한국수산과학회지
    • /
    • 제17권5호
    • /
    • pp.361-367
    • /
    • 1984
  • In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

  • PDF

공동이 있는 수직 분사 초음속 연소기 내의 불안정 연소유동 해석 (Numerical Analysis of Unstable Combustion Flows in Normal Injection Supersonic Combustor with a Cavity)

  • Jeong-Yeol Choi;Vigor Yang
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
    • /
    • pp.91-93
    • /
    • 2003
  • A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

  • PDF

제2차 고기후 모델링 비교 프로그램 시뮬레이션 자료를 이용한 마지막 최대빙하기의 북극 기후변화 연구 (Arctic Climate Change for the Last Glacial Maximum Derived from PMIP2 Coupled Model Results)

  • 김성중;우은진
    • 한국기후변화학회지
    • /
    • 제1권1호
    • /
    • pp.31-50
    • /
    • 2010
  • 제2차 고기후 모델링 비교 프로그램(Paleoclimate Modelling Intercomparison Program phase II, PMIP2)의 대기-해양-해빙 접합모형을 통해 얻어진 시뮬레이션 자료를 이용하여 마지막 최대빙하기(Last Glacial Maximum)의 북극 기후변화를 연구하였다. 연구에 이용된 모형은 미국 해양대기청의 CCSM, 독일 막스플랑크 연구소의 ECHAM3-MPIOM, 영국 기상청의 HadCM3M2, 프랑스 라플라스 연구소의 IPSL-CM4, 프랑스 기상연구소의 CNRM-CM3, 일본 동경대 기후연구소의 MIROC3.2, 그리고 중국 대기물리연구소의 FGOALS을 포함해 총 7개로 구성된다. 7개 모형들에 의해 재현된 현재 기후를 관측에 기초로 한 재분석 자료와 비교해 본 결과, 모든 모형에서 관측에 나타나는 북극기후의 특징들이 비교적 잘 재현되었다. 모든 기후 모형들에 마지막 최대빙하기의 대기 이산화탄소 농도를 포함한 온실기체, 지구공전궤도함수, 그리고 빙상 및 지형의 경계 조건이 적용되었다. 빙하기 경계 조건에 대하여 대륙빙하가 발달했던 북미와 북유럽에서 $24^{\circ}C$ 이상의 온도 감소가 나타나는데, 이는 빙하의 발달에 따른 표층의 알베도 증가와 고도의 증가에 기인하는 것으로 여겨진다. 또한 빙하의 발달에 기인하여 북극해에서도 $10^{\circ}C$ 이상의 온도 감소가 나타난다. 여름철에 비해 겨울철 온도 감소가 대체로 더 크게 나타나며, 북극 주변에서 평균 약 $14^{\circ}C$ 정도의 연평균 온도 감소를 보이고 있다. 저위도에 비해 북극 지역의 온도 감소가 모든 계절, 특히 겨울철에 더 크게 나타나는데, 이는 최근 지구 온난화의 정도가 극 지역에서 저위도나 중위도에 비해 더 크게 나타나고 있는 것과도 잘 대비된다. 본 연구결과와 최근의 온난화가 서로 대비되게 일어나기 때문에, 마지막 최대빙하기의 연구를 통해 미래 지구온난화 하에서 나타날 수 있는 기후변화를 간접적으로 이해할 수 있을 것으로 사료된다.

농장맞춤형 농업기상정보 생산을 위한 소기후 모형 구축 (Establishment of Geospatial Schemes Based on Topo-Climatology for Farm-Specific Agrometeorological Information)

  • 김대준;김수옥;김진희;윤은정
    • 한국농림기상학회지
    • /
    • 제21권3호
    • /
    • pp.146-157
    • /
    • 2019
  • 우리나라 농산촌 환경의 가장 큰 특징 중 하나는 지형이 복잡하여 좁은 지역 내에서도 기상/기후 분포변이가 크다는 점이다. 이를 효과적으로 모의하기 위하여 '소기후 모형'이 개발되었고 현재까지 지속적으로 개선 연구가 진행되고 있다. 소기후 모형은 우리나라 전역에 대해 농장필지 단위까지 공간적으로 정밀한 농업기상/기후 정보를 표현할 수 있는 모형으로 기후요소별로 독자적으로 개발되었다. 소기후모형을 이용하여 2000년대에는 국지규모의 현재평년 및 미래 시나리오 기반 기후정보를 산출하였다. 평년 전자기후도는 과거 30년 기간의 월별 최저기온, 최고기온, 강수량, 일사량을 30 m 격자해상도로 상세화 한 분포도이며, 이 전자기후도를 기반으로 미래 기후변화 시나리오를 고해상도로 상세화하여 제작하였다. 이 들 전자기후도는 농업분야 기후변화 영향평가에 다양한 형태로 재가공 되어 이용되었다. 2010년대에는 농장맞춤형 기상 실황 및 예보자료를 국지규모로 생성하고 있다. 소기후 모형은 지속적인 개선 과정을 통해 일별 관측기상자료를 기반으로 실황정보를 상세화하는 기술로 발전하고 있으며, 기상청 동네예보 및 중기예보를 30 m 격자해상도로 상세 모의하여 농업분야 종사자에게 예측 정보를 실시간 제공할 수 있는 '농업기상 재해 조기경보 서비스' 기반의 핵심기술로 인정 받고 있다. 현재 상세 기상 실황 및 예보정보로는 일 최저 및 최고기온과 강수량, 일사량, 일조시간 등이 산출되고 있으며, 과거-현재-미래의 농장규모 기상정보를 토대로 각종 농작물의 생육정보와 기상재해 예측정보를 생산하고 있다.

서태평양 마젤란해산군 OSM-XX 해저산 망간각의 광물학적, 지화학적 특성과 고해양 고환경 복원 연구 (Revealing the Paleo-ocean Environment of OSM-XX in the Western Pacific Magellan Seamount with Mineralogical and Geochemical Properties of Ferromanganese Crust )

  • 박진섭;양기호
    • 자원환경지질
    • /
    • 제56권1호
    • /
    • pp.55-63
    • /
    • 2023
  • 망간각의 지화학적, 광물학적 특성의 변화는 인근 환경 변화를 반영한다. 따라서 서태평양 마젤란해산군 OSM-XX의 망간각에 대한 특성 파악과 고해양 복원 연구를 위하여 지화학적, 광물학적 분석을 각각 micro X-ray fluorescence (μ-XRF) 과 X-ray diffraction (XRD)를 이용하여 실시하였다. OSM-XX의 망간각은 인산염화 여부 및 구조에 의해 인산염화 작용을 받은 부분(L4-L5), 인산염화 작용을 받지 않은 치밀한 부분(L3), 인산염화 작용을 받지 않은 다공성 부분(L1-L2)의 세 부분으로 구분되었다. 철망간 산화광물 층에서는 모두 버나다이트 피크가 확인되었으며, 인산염화 작용을 받은 부분은 carbonate fluorapatite(CFA)의 존재와 높은 Ca, P의 특성을 나타내었다. 인산염화 작용을 받지 않은 치밀한 부분은 높은 Mn, Ni, Co를 나타내었고, 인산염화 작용을 받지 않은 다공성 부분은 높은 Fe값과 detritus quartz, feldspar가 확인되었다. OSM-XX의 망간각이 성장하는동안 나타난 특성의 변화는 인근 해양환경의 변화를 반영하였다. 약 51.87 Ma의 연대를 나타내는 망간각의 인산염 퇴적체는 약 36-32 Ma의 전지구적 인산염화 작용에 의해 형성된 것으로 보이며, 이는 당시의 상승된 해수면 높이와 낮은 해수온을 지시한다. 또한, 치밀한 구조에서의 높은 Mn, Ni, Co, Mn/Fe 비는 강화된 산소최소층과 환원환경을 지시하며, 다공성 구조에서의 높은 Fe와 낮은 Mn/Fe 비는 약화된 산소최소층과 산화환경을 지시한다. 이는 마이오세-올리고세 경계의 Mi-1 빙하기가 끝난 후 환경변화를 반영하였다. 9 Ma부터 이어진 한랭화의 결과로 인한 저층류와 산소최소층의 강화에 의해 망간각 최외각의 Mn/Fe 비와 Co/Mn 비가 미세하게 증가하였지만, 6 Ma부터 태평양에 발생한 탄산염 용해율의 감소로 성장속도의 감소를 야기하였다.

예비유니콘 선정기업의 이익조정에 대한 연구 (Earnings Management of Firms Selected as Preliminary Unicorn)

  • 한학준;양동훈
    • 벤처창업연구
    • /
    • 제18권1호
    • /
    • pp.173-188
    • /
    • 2023
  • 본 연구는 예비유니콘 선정기업을 대상으로 선정시점에 대한 이익조정을 분석하였다. 경영자는 예비 유니콘기업에 선정되면 최대 200억원에 달하는 금융지원을 받을 수 있어 이익조정의 유인이 생긴다. 경영자에게 이익조정의 동기에는 자본시장과 관련된 동기가 있는데 회계정보는 투자자와 재무분석가에게 이용이 되고 기업의 이익은 기업가치에 영향을 주고 있다. 따라서 회계 이익을 상향으로 조정하면 기업가치가 상향되어 투자조건이 유리하게 된다. 본 연구에서는 이익의 질은 대체적인 발생액 예측모형을 이용하여 추정된 재량적 발생액 중에서 Dechow et al.(1995)에 의한 수정 Jones모형 및 Kothari et al.(2005)에 의한 성과대응모형으로 측정하였다. 선정기업과 동일시장에서 경쟁할 것을 예상되는 유사한 대응기업을 구성하여 재량적발생액을 상호 비교하여 연구가설을 검증하고 선정기업만을 대상으로 심사년도와 심사년도 이후를 분석하였다. 분석 결과 예비유니콘 선정기업이 대응기업과 비교하여 이익조정이 높은 것으로 나타나서 회계 이익의 질에 부정적인 영향을 주는 것을 알 수 있었다. 그리고 선행연구에서와 다르게 선정후에도 이익의 질이 낮은 것으로 나타나서 예비유니콘 선정기업은 선정 후에도 경영자의 이익조정의 유인이 계속 지속되는 것을 알 수 있었다. 본 연구를 통해 예비유니콘 선정기업은 기업의 내부 성장보다는 기업의 외형 성장을 통해 시장에서의 가치를 인정받아서 외부 투자자로부터 유리한 조건의 투자를 유치하기 위한 경영자에게 이익조정의 유인이 지속되고 있는 것으로 분석되었으며 향후 예비유니콘 선정평가에서 회계 이익의 질에 대한 검토가 필요한 것을 제시할 수 있었다. 본 연구의 시사점은 경영자의 이익조정 유인이 결국 투자자나 채권자로 하여금 회계정보의 신뢰성을 판단하는데 저해가 되고 있어 이러한 경영자의 이익조정에 대한 것을 감안하여 예비유니콘기업 선정평가에 있어서 회계정보의 투명성과 신뢰성을 높이는 K-유니콘 프로젝트의 정책대안으로 재량적발생액을 통한 이익의 질에 대한 평가를 반영하여 이익조정을 예방할 것을 시사하고 있다.

  • PDF

지방과 근육 세포주의 단독 및 공동배양을 통한 세포형태학 및 세포물질 비교 연구 (Comparison between Single and Co-culture of Adipocyte and Muscle Cell Lines in Cell Morphology and Cytosolic Substances)

  • 최창원;조원모;연성흠;황보순;송만강;박성권;백경훈
    • Journal of Animal Science and Technology
    • /
    • 제54권2호
    • /
    • pp.103-109
    • /
    • 2012
  • 본 연구는 기존 단독배양 위주로 이루어져온 세포배양 연구의 방법학적 한계의 극복과 대안을 제시하고자 지방과 근육세포주의 단독 및 공동배양에서 배양기법에 따른 지방 및 근육세포의 분화에 미치는 영향을 비교 조사하고자 실시하였다. 3T3-L1 (지방세포) 및 L6 (근육세포) 세포주는 성장배지인 10% FBS/DMEM (1% Pen-Strep solution 및 0.1% Fungizone 첨가) 하에서 48h 동안 단독배양 후 5% FBS/DMEM에서 배양하였다. 분화를 위한 단독 및 공동배양에서는 지방 및 근육세포 모두 분화유도물질 없이 2% FBS/DMEM으로 배양하였고, 공동배양에서는 $0.4{\mu}m$ insert membrane을 사용하여 6 well plate 하단에 L6 cell을, 상단에는 3T3-L1 cell을 공생시켰다. 지방 및 근육세포 분화정도 측정은 세포별 형태학적 측정과 glycerol-3-phosphate dehydrogenase (GPDH) 및 creatine kinase (CK) 분석을 통해 조사되었다. 형태학적으로 볼때 3T3-L1 세포주는 공동배양보다 단독배양 시 분화가 더욱 잘 일어났고 L6 세포주의 경우 역으로 같았다. 세포물질 분석에서는 분화배지 처리일(day 0)과 비교해 단독 및 공동배양 모두 지방세포 내 GPDH의 활성도가 유의적으로(P<0.05) 증가했음을 확인할 수 있었고 단독배양이 공동배양보다 유의적으로(P<0.05) 높은 수준의 GPDH 활성도를 보였다. L6 역시 마찬가지로 분화배지 처리일에 비하여 단독 및 공동배양 모두 CK 활성도가 유의적으로(P<0.05) 높았고, CK 활성도가 공동배양에서 유의적으로(P<0.05) 높게 나타남을 확인할 수 있었다. 이러한 결과는 기존 연구에서 이용된 단독 배양을 통한 세포 분화 결과 등은 생체와 비교 시 방법학적 한계로 인해 실제 생체 내에서는 그 분화정도가 매우 다를 것으로 생각되며, 이것은 앞으로 정확한 세포배양 결과 확보를 위해서는 단독배양보다는 공동배양기법을 사용해야 함을 의미한다. 향후 다양한 조건과 분화조절 물질들의 첨가를 통한 추가적인 공동배양실험이나 지방분화관련 분자생물학적 물질분석 등 다양한 실험 수행 시 보다 현실적이고 대량의 기초자료 확보가 가능할 것으로 판단된다.

중파자외선에 대한 남극산 해조류의 광합성 및 자외선 흡수물질 형성 반응 (Photosynthesis and Formation of UV-absorbing Substances in Antarctic Macroalgae Under Different Levels of UV-B Radiation)

  • 한태준;박병직;한영석;강성호;이상훈
    • 환경생물
    • /
    • 제20권3호
    • /
    • pp.205-215
    • /
    • 2002
  • 남극에 생육하는 5종의 홍조류(Curdiea racouitzae, Gigartina skottsbergii, Mazzaella obovata, Myriogramme manginii, Palmaria decipiens)를 대상으로 인공 중파 자외선과 태양광선에 대한 종별 생리적 반응을 광합성이라는 파라미터를 사용하여 조사 연구하였다. 실험실연구 결과, 종간에 중파 자외선에 대한 내성 차이가 확인되었으며 이러한 차이는 각 종들이 채집되기 전에 서식하고 있었던 수심과 매우 밀접한 관계가 있어서 20-30m의 수심에서 채집된 M. manginii와 P. decipiens의 자외선 내성이 다른 종들에 비하여 작게 나왔다. 본 연구 결과는 서식지 주변의 광환경이 해조류의 자외선 내성을 결정해 주는 한 요인이라는 가설을 입증해주었을 뿐 아니라 형광 변화를 이용한 광합성 측정법은 자외선 내성을 타진하는데 있어서 매우 신속하고 비파괴적인 방법으로 이용될 수 있음을 입증하였다. 두 종의 흥조류(M. manginii, P. decipiens)를 대상으로 태양광선 하에서의 광합성 효율을 관찰한 결과, 정오에 최저 광합성을 보인 반면 저녁에는 광합성 능력이 회복되는 현상을 나타내었다. 이같은 동적인 광저해 현상(dynamic photoinhibition)은 일종의 광적응 능력으로서 식물이 비교적 강한 태양광선에 노출된 지역에 성공적으로 서식하는데 크게 기여하는 것으로 사료된다. 본 연구에서는 또한 태양광선내 중파자외선 포함 유무에 따라 광합성 회복 속도에 차이가 나는 것을 볼 수 있었는데 중파자외선이 포함된 태양 광선 하에서는 광합성의 회복이 느린 반면, 중파 자외선이 제거된 조건에서는 광합성이 비교적 빨리 회복되는 것을 관찰할 수 있었고 이는 중파 자외선이 광합성 회복 기작을 지연시키는 작용을 한 것으로 해석될 수 있다. 야외에서 자외선 민감성을 비교한 결과, P. decipiens가 M. manginii에 비하여 자외선 내성이 큰 것으로 나타났는데, 두 종 공히 조간대로부터 조하대 상부까지 서식하는 종임에도 불구하고 이러한 내성차이를 보인 이유는 자외선 흡수물질의 정량적인 차이에 기인한다고 할 수 있다. M. manginii와 P decipiens에서 발견된 자외선 흡수물질의 양은 약 1:2 정도의 비율을 보였는데 이러한 정량적 차이가 자외선 민감성에 기여한 것으로 사료된다. 본 연구에서는 또한 계절별 그리고 채집 수심별로 자외선 흡수물질의 정량적 차이를 발견할 수 있었는데 태양광선이 풍부한 여름철에 그리고 고광량이 도달되는 수심 얕은 곳에 서식하는 개체가 더욱 많은 양의 자외선 흡수물질을 함유한 것으로 나타났다.

사상자세방(蛇床子洗方)의 Gardnerella vaginalis에 대한 시험관 내 항균력 및 Metronidazole과 병용효과 (Antibacterial Effects of Sasangjasaebang Aqueous Extracts Against Gardnerella Vaginalis ATCC14018, and Combination Effects with Metronidazole)

  • 성현아;박영선;김동철
    • 대한한방부인과학회지
    • /
    • 제23권2호
    • /
    • pp.20-37
    • /
    • 2010
  • Purpose: The objective of this study was to observe the antibacterial effects of Sasangjasaebang (SSJSB) aqueous extracts, traditionally used for treating various gynecological diseases including vaginitis in Korea and their individual components - Cnidi Fructus(CF), Zanthoxyli Fructus(ZF) and Alumen(AL) against Gardnerella vaginalis ATCC14018, and combination effects of SSJSB extracts and Metronidazole were also monitored in this study. Methods: Antibacterial activities against Gardnerella vaginalis ATCC14018 of SSJSB (CF : ZF : AL = 10 : 3 : 3) aqueous extracts and their individual components were detected using standard agar microdilution methods. In addition, the effects on the bacterial growth curve were also monitored at MIC and $MIC{\times}2$ levels. The combination effects of SSJSB aqueous extracts and Metronidazole were observed by Checkboard Microtiter Assay and effects on bacterial growth curve treated with SSJSB aqueous extracts MIC + Metronidazole MIC, 1/2MIC and 1/4MIC, respectively. In the present study, Gardnerella vaginalis ATCC14018 were incubated under $37^{\circ}C$, 10% CO2 and bacterial growth curves were calculated at 24, 48, 72, 96 and 120 hrs after incubations. Results: MIC of CF aqueous extracts, ZF aqueous extracts, AL powders and SSJSB aqueous extracts against Gardnerella vaginalis ATCC14018 were detected as $27.5\;{\pm}\;13.693$(12.5~50), $6.875\;{\pm}\;3.423$(3.125~12.5), $4.375\;{\pm}\;1.713$(3.125~6.25) and $2.188\;{\pm}\;0.856(1.563{\sim}3.125)mg/m{\ell}$, respectively. MIC of Metronidazole was detected as $7.6\;{\pm}\;5.367(2{\sim}16){\mu}g/m{\ell}$ at same conditions. In addition, Metronidazole, CF aqueous extracts, ZF aqueous extracts, AL powders, and SSJSB aqueous extracts showed marked dosage-dependent inhibition of bacterial growth, and more dramatical inhibitions were detected in Metronidazole 1/2 MIC + SSJSB aqueous extracts MIC treatment as compared with each of single Metronidazole MIC and SSJSB aqueous extracts MIC treatments, respectively. Especially, quite similar inhibitory effects on bacterial growth were detected in Metronidazole 1/4 MIC + SSJSB aqueous extracts MIC treatment as compared with single Metronidazole MIC treatment in the present study. FIC index were detected as $0.475\;{\pm}\;0.137$(0.375~0.625) at Checkboard Microtiter Assay. Conclusion: The results obtained in this study suggest that CF aqueous extracts, ZF aqueous extracts, AL powders, and SSJSB aqueous extracts showed antibacterial effects against Gardnerella vaginalis ATCC14018, and they also showed dosage-dependent inhibitory effects on the bacterial growth. More potent antibacterial effects were detected in SSJSB aqueous extract as compared with individual components, respectively. In addition, combination treatment of SSJSB aqueous extract and Metronidazole showed more potent inhibitory effects on the growth of Gardnerella vaginalis with FIC index $0.475\;{\pm}\;0.137$(0.375~0.625). According to these results, the combination of SSJSB aqueous extract and Metronidazole is synergistic, and it is expected that effective dosages of Metronidazole could be reduced to 1/4 levels in combination with SSJSB extracts. And it might be needed to make further studies to seek the herbs which have antibacterial effects on the Gardnerella vaginalis ATCC14018.