• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1094-1103
• /
• 2001

According to standard procedures as defined in the users handbook for sea level data processes, I was compared to Topex/Poseidon sea level data from the first 350days of mission and Tide Gauge sea level data from the Amsterdam- Crozet- Kerguelen region in the South Indian Ocean. The comparison improves significantly when many factors for the corrections were removed, then only the aliased oceanic tidal energy is removed by oceanic tide model(11) in this period. Making the corrections and smoothing the sea level data ()ver 60km along-track segments and the Tide Gauge sea level data for the time series results in the digital correlation and RMS difference between the two data of c=-0.12 and rms= 11.4cm, c=0.55 and rms=5.38cm, c=0.83 and rms=2.83cm, and c=0.24 and rms=6.72 for the Amsterdam, Crozet and Kerguelenplateau, and Kerguelen coast, respectively. It was also found that the Kerguelen plateau has a comparisons due to propagating signals(the baroclinic Rossby wave with velocity of -3.9 ~-4.2cm/sec, period of 167days and amplitude of 10cm) that introduce temporal lags(${\gamma}$: 10~30days) between the altimeter and tide gauge time series. The conclusion is that on timescales longer than about 10days the RMS sea level errors are less than or of the order of several centimeters and are mainly due to the effects of currents rather than the effects of stories(water temperature, density) and winds.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.316-322
• /
• 2012

In the port of Ulsan with the area of harbor limit of $83km^2$, 25,432 vessels have been entering annually and only 35 vessels can anchor simultaneously at the anchorage. The area of harbor limit of Ulsan constitutes just 65 percent compared to $127.5km^2$ which is an average of main ports in Korea. In this regard, the port of Ulsan needs to expand the area of anchorages inevitably for enhancing the efficiency of port operation. To select the best anchorage area in Mipo harbor with the introduction of a concept of emergency anchorage, this study analyzed the safety of navigation and anchorage, and safety management, etc. in the prospected anchorage on the basis of the marine traffic survey observing traffic density. Furthermore, after drawing preliminary and final schemes through gathering the opinions from maritime users, safety management organizations and academic experts group, the best arrangement of emergency anchorage has been selected through the conference of interested parties. Then, the final scheme was also verified through figuring out the marine traffic system and carrying out the ship handling simulation.

• Journal of Global Scholars of Marketing Science
• /
• v.13
• /
• pp.209-229
• /
• 2004

Although the site evaluation factors that affect the navigation pattern are well documented, the attempt to explore the difference in the relationship between navigation pattern and site evaluation factors by post hoc segmentation approach has been relatively rare. For this purpose, this study constructs the structure equation model using web-evaluation data and log file of a community site with 300,000 members. And then it applies the structure equation model to each segment. Each segment is identified by mixture model. Mixture model is to unmix the sample, to identify the segments, and to estimate the parameters of the density function underlying the observed data within each segment. The study examines the opportunity to increase GFI, using mixture model which supposes heterogeneous groups in the users, not through specification search by modification index from structure equation model. This study finds out that AGFI increases from 0.819 at total sample to 0.927, 0.930, 0.928, 0.929 for each 4 segments in the case of the community site. The results confirm that segment level approach is more effective than model modification when model is robust in terms of theoretical background. Furthermore, we can identify a heterogeneous navigation pattern and site evaluation variation in the community website at segment level.

• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.183-192
• /
• 1995

This study was conducted to investigate bird community and to suggest a proper way how to manage and protect wildbirds in Chuwangsan National Park. The survey was carried out over two survey sections by the line transect method in spring, summer and autumn in 1994. Total number of observed birds were 42 species(33 species in spring, 32 species in summer, and 26 species in autumn), and the result was the same with the typical pattern of temperate bird communities. Total number of natural monument and rare birds were 7 species, which included Golden Eagle(Aquila chrysaetos), Chinese Sparrow Hawk(Accipter soloensis), Eagle Owl(Bubo bubo), etc. In breeding season, species richness was high in canopy nesting guild, and density(ea/ha) was high in hole nesting guild. Canopy foraging guild was dominated in spring and summer, ratio of bush(or ground) foraging guild was increased in autumn. Since the habitats of observed natural monuments and rare species were roughly overlapped with the nature preservation area, it is necessary to preserve the area completely and to investigate and protect these species continuously. For the protection of the bush(or ground) foraging guild, it needs to plant bushes around trails and to control users. Food plants, artificial food planting of bushs, and artificial nest are needed for the habituation of wildbirds, and as the damage of wild cats is increasing lately, it needs to control these cats.

• 한국가스학회:학술대회논문집
• /
• 2005.10a
• /
• pp.37-43
• /
• 2005

The questionnaires about the safety of the urban gas have been carried out for the end users. about 8 of 10 persons said that the urban gas Is safe to use, whereas $35\%$ of them said there exists a hazard of an accident in thier residences. There cannot be found the clear evidences that the understandings on the safety of the urban gas have no relations to their ages, sex, and monthly incomes, while the safety is less confidential to the highly educated, the accident-experienced, or the mans who are poor at the safety inspections. Most of the questioned man know the inspection knacks for the gas utilities, but only $60\%$ of them carry out it. They said that they do not feel the necessity of the inspection because they are inspected routinely by the suppliers or the inspection companies. This says that the end user does not concern the safety inspections, and in order to improve the dependency of the user for the self-inspections, the inspection staff should educate the user for the necessity and the knack of inspections to encourage the self-inspection of the gas utilities.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.119-120
• /
• 2002

The aim is to urge the need of elaborate commissioning of 3D RTP system from the firsthand experience. A 3D RTP system requires so much data such as beam data and patient data. Most data of radiation beam are directly transferred from a 3D dose scanning system, and some other data are input by editing. In the process inputting parameters and/or data, no error should occur. For RTP system using algorithm-bas ed-on beam-modeling, careless beam-data processing could also cause the treatment error. Beam data of 3 different qualities of photon from two linear accelerators, patient data and calculated results were commissioned. For PDD, the doses by Clarkson, convolution, superposition and fast superposition methods at 10 cm for 10${\times}$10 cm field, 100 cm SSD were compared with the measured. An error in the SCD for one quality was input by the service engineer. Whole SCD defined by a physicist is SAD plus d$\sub$max/, the value was just SAD. That resulted in increase of MU by 100${\times}$((1_d$\sub$max//SAD)$^2$-1)%. For 10${\times}$10 cm open field, 1 m SSD and at 10 cm depth in uniform medium of relative electron density (RED) 1, PDDs for 4 algorithms of dose calculation, Clarkson, convolution, superposition and fast-superposition, were compared with the measured. The calculated PDD were similar to the measured. For 10${\times}$10 cm open field, 1 m SSD and at 10 cm depth with 5 cm thick inhomogeneity of RED 0.2 under 2 cm thick RED 1 medium, PDDs for 4 algorithms were compared. PDDs ranged from 72.2% to 77.0% for 4 MV X-ray and from 90.9% to 95.6% for 6 MV X-ray. PDDs were of maximum for convolution and of minimum for superposition. For 15${\times}$15 cm symmetric wedged field, wedge factor was not constant for calculation mode, even though same geometry. The reason is that their wedge factor is considering beam hardness and ray path. Their definition requires their users to change the concept of wedge factor. RTP user should elaborately review beam data and calculation algorithm in commissioning.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.55-62
• /
• 2009

Location based Services in the ubiquitous computing environment, namely u-LBS, use very large and skewed spatial objects that are closely related to locational information. It is especially essential to achieve fast search, which is looking for POI(Point of Interest) related to the location of users. This paper examines how to search large and skewed POI efficiently in the u-LBS environment. We propose the Dynamic-level Grid based R-Tree(DGR-Tree), which is an index for point data that can reduce the cost of stationary POI search. DGR-Tree uses both R-Tree as a primary index and Dynamic-level Grid as a secondary index. DGR-Tree is optimized to be suitable for point data and solves the overlapping problem among leaf nodes. Dynamic-level Grid of DGR-Tree is created dynamically according to the density of POI. Each cell in Dynamic-level Grid has a leaf node pointer for direct access with the leaf node of the primary index. Therefore, the index access performance is improved greatly by accessing the leaf node directly through Dynamic-level Grid. We also propose a K-Nearest Neighbor(KNN) algorithm for DGR-Tree, which utilizes Dynamic-level Grid for fast access to candidate cells. The KNN algorithm for DGR-Tree provides the mechanism, which can access directly to cells enclosing given query point and adjacent cells without tree traversal. The KNN algorithm minimizes sorting cost about candidate lists with minimum distance and provides NEB(Non Extensible Boundary), which need not consider the extension of candidate nodes for KNN search.

• Korean Journal of Environment and Ecology
• /
• v.1 no.1
• /
• pp.24-34
• /
• 1987

This study was conducted to investigate avifauna and user's effect on the avifauna in Bukhan Mountain district of Bukhan Mountain National Park. Avifauna were investigated bimonthly from April to October 1987 over four districts which were main trail and sub-trail in each valley and ridge-midslope region by line transect methods. The observed birds in Bukhan Mountain districts was 34 species and 753 individuals and these consist of 19 species for residents. 11 species for summer visitor. 2 species for passage migrant and 2 species for winter visitor. The dominant species were Parus major (22.7%), Paradoxornis webbina(10%), Parus palustris (10.8%), Pica pica (10.0%) in order. No. of species and species diversities was higher in valley region than in ridge-midslope region. No. of species, individuals and species diversities were lower in main trail of high user's density than in sub-trail. Especially avifauna in main trail was severely decreased in August in valley region in which users were concentrated. But there was no change in similarity indices according to user's intensities. Therefore avifauna protection policy such as restoration and rehabilitation of edge species along trail, user's control in valley region during breeding periods, etc., shall be made for Bukhan Mountain National Park.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.24-30
• /
• 2008

In this paper we analyze the performance of an adaptive sector cell system, which is adopted to maintain the traffic balance between sectors and to utilize the cell resources effectively, using the data collected from real channel environments. In the data measurements, we transmitted the QPSK modulated signal with carrier frequency of 1.95GHz and received the signals using the 8x4 array antenna equipped on the top of buildings in the urban area. We analyzed the angular distribution and the delay spread of a user signal and analyzed angular distribution of mobile users in a cell using the collected data. Also, we propose the vector channel modeling using the estimated pdf(probability distribution function) of the analyzing results. Through the proposed channel modeling the improvement of the call blocking rate was analyzed when using the adaptive sector cell system, and computer simulations show that the call blocking rate of the adaptive sector cell system was much lower than that of the fixed sector cell system. Additionally, it shows that the call blocking rate increases severely in the fixed sector cell system while the difference of the call blocking rate was smaller in the adaptive sector cell system, as the user density of the spatial distribution increases.

• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.389-394
• /
• 2016

Background: Tetrahedral-mesh geometries can be used in the MCNP code, but the MCNP code accepts only the geometry in the Abaqus input file format; hence, the existing tetrahedral-mesh models first need to be converted to the Abacus input file format to be used in the MCNP code. In the present study, we developed a simple but useful computer program, TET2MCNP, for converting TetGen-generated tetrahedral-mesh models to the Abacus input file format. Materials and Methods: TET2MCNP is written in C++ and contains two components: one for converting a TetGen output file to the Abacus input file and the other for the reverse conversion process. The TET2MCP program also produces an MCNP input file. Further, the program provides some MCNP-specific functions: the maximum number of elements (i.e., tetrahedrons) per part can be limited, and the material density of each element can be transferred to the MCNP input file. Results and Discussion: To test the developed program, two tetrahedral-mesh models were generated using TetGen and converted to the Abaqus input file format using TET2MCNP. Subsequently, the converted files were used in the MCNP code to calculate the object- and organ-averaged absorbed dose in the sphere and phantom, respectively. The results show that the converted models provide, within statistical uncertainties, identical dose values to those obtained using the PHITS code, which uses the original tetrahedral-mesh models produced by the TetGen program. The results show that the developed program can successfully convert TetGen tetrahedral-mesh models to Abacus input files. Conclusion: In the present study, we have developed a computer program, TET2MCNP, which can be used to convert TetGen-generated tetrahedral-mesh models to the Abaqus input file format for use in the MCNP code. We believe this program will be used by many MCNP users for implementing complex tetrahedral-mesh models, including computational human phantoms, in the MCNP code.