• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.81-85
• /
• 2009

In the recent years, the high strength concrete has increasingly been used according to extending market of tall buildings. However, Ministry of Land, transport and Maritime Affairs was established by law with an alternative plan after June 2008 because of the weakness of high strength concrete accompanied spalling phenomena in fire. The mix design of concrete has to properly meet standards which are the spalling resistance of concrete and limited temperature of steel reinforcement. The fire proof concrete mixed fiber has widely been used to meet spalling safety on the many construction sites, the most researches about the fire proof concrete mixed fiber had being carried out focused on fire resistance, compressive strength and cast in place of concrete. But the most important thing is column shortening used the fire proof concrete within the vertical members. In this paper, the fire proof concrete filled spalling safety standards was experimented by required material when the column shortening is revised between normal concrete and fire proof concrete mixed fiber and then the results have done a comparative analysis. Also, The paper aimed to indicate a basic data for revision of column shortening of fire proof concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.173-174
• /
• 2009

본 연구는 최근 초고층 건축물의 등장으로 인하여 기존의 토목 구조물에서만 사용되었던 축소량에 대하여 검토가 시작되었다. 이러한 수직부재에 대한 축소량의 검토는 기본적으로 콘크리트가 받는 하중, 재료특성 등으로 발생되는 변형을 기본으로 하고 있다. 하지만 이러한 콘크리트가 받는 작용 인자나 특성을 가지고 계수 산정을 통한 축소량 해석을 하고 있지만, 각각의 재료시험적인 측면에서의 분석을 다소 미미하게 되고 있다. 따라서 본 연구에서는 수직부재 즉 기둥축소량 보정을 위한 기본적인 재료시험항목에 대하여 각각을 분석하여 축소량 보정을 위한 계수산정전 재료시험의 신뢰성을 파악하고 이에 대한 성능적인 검토를 하고자 하는데 목적이 있다.

• 한국전산구조공학회논문집
• /
• 제24권2호
• /
• pp.141-148
• /
• 2011

본 논문에서는 기둥축소량 보정의 효율성을 증진시키기 위한 방안으로서 유사한 축소 경향을 보이는 기둥들을 동일 그룹으로 묶는 기둥의 최적그루핑기법에 대하여 연구하였다. 기둥의 최적그루핑은 무감독학습에 의해 입력데이타의 패턴을 스스로 분류할 수 있는 코호넨의 자기조직화 형상지도 알고리즘을 이용하였다. 본 연구에 적용된 코호넨 네트워크는 두 개의 입력뉴런과 분류할 기둥그룹 개수만큼의 출력뉴런으로 구성된다. 입력뉴런에는 기둥축소량의 정규화된 평균과 표준편차가 입력되며, 출력뉴런에는 각 기둥이 속하게 될 기둥그룹이 출력된다. 제안된 알고리즘을 실제 축소량 해석이 수행된 두 개의 건물에 적용하여 그 적용성을 평가하였다. 적용결과 동일 그룹으로 분류된 기둥들은 서로 인접하고 있으며 서로 다른 기둥그룹끼리는 교차하지 않는 등 유사한 축소 경향을 보였다. 이로부터 본 연구의 기둥축소량의 최적그루핑 알고리즘은 충분한 실무적용성이 있음을 확인하였다.

• 대한물리의학회지
• /
• 제18권2호
• /
• pp.49-59
• /
• 2023

PURPOSE: This study examined the relationship between lumbar instability and shortening of the iliopsoas muscles in patients with chronic low back pain. METHODS: Forty-nine patients with chronic low back pain participated in this study. The modified Thomas test was used to examine the shortening state of the iliopsoas muscle. The length of the iliopsoas muscle was measured using the hip flexion angle, and those with a flexion angle of 10° or more were classified as positive. Five subtests were used for the lumbar instability test: testing for prone lumbar instability, passive lumbar extension, anterior-posterior mobility, passive straight leg raise, and age. Those who tested positive for at least three of these tests were classified as positive for the lumbar segment instability test. RESULTS: There was a significant association between the results of the lumbar instability test and the shortening of the iliopsoas test (p < .05). After analyzing the association between the iliopsoas length test and the five lumbar instability subtests, the results of the prone lumbar instability test (p < .001) and the anterior-posterior mobility test (p < .05) showed a significant association with the iliopsoas length test. CONCLUSION: The association between lumbar instability and shortening of the iliopsoas muscles was examined in 49 patients with chronic low back pain. Patients with shortened iliopsoas muscles tested positive in the lumbar instability tests more often. Hence, the length test of the iliopsoas muscle can be used to determine lumbar instability in patients with chronic low back pain.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.397-402
• /
• 1998

The objectives of this paper are to estimate differential column Shortening and to determine appropreate compensation amount in 52 story Amatapura Apartment in Indonesia. for this, a computer program based on PCA and CEB-FIP code is developed. The results show that Elastic and Creep strain are the main factors of column shortening and the maximum differential shortening is appeared near the middle of the building height. The results between field survey and estimation have some difference, the most influential factor of the difference can be lateral restraints provided by horizontal members, which cannot be handled in this developed program. Hence introducing the modification factors from various field survey, this program can be used properly in design and construction procedures.

• 한국전산구조공학회논문집
• /
• 제21권2호
• /
• pp.189-197
• /
• 2008

본 연구에서는 3개 이상의 기둥그룹에 대해서도 일반적으로 적용 가능한 기둥축소량의 최적보정기법을 제안하고, 이를 실제 시공된 건물에 적용하여 그 적용성을 평가하였다. 제안된 최적보정기법은 성능 및 시공상의 제약조건을 만족하면서 보정개소를 최소한으로 할 수 있는 층그룹 및 이때의 보정량을 산정하며, 상대보정뿐만 아니라 절대보정을 고려한 혼합보정도 가능하다. 최적보정에는 시뮬레이티드 어닐링(simulated annealing)이 주요 알고리즘으로 사용되었다. 제안된 기법을 실제 축소량 보정이 수행된 61층 건물에 적용한 결과, 보정량을 쉽게 산출할 수 있고 또한 실무방식보다 보정개소를 줄일 수 있어 적용성이 뛰어남을 확인하였다.

• 한국식생활문화학회지
• /
• 제24권3호
• /
• pp.344-349
• /
• 2009

약과 반죽시 참기름 대용으로 쇼트닝을 이용할 목적으로 쇼트닝의 혼합비율을 달리하여(참기름 100%, 참기름 75%+쇼트닝 25%, 참기름 50%+쇼트닝 50%, 쇼트닝 100%) 약과를 제조하고, 약과 유지의 지방산 조성, 유지함량, 원료유지의 잔존율, 저장 중의 유지산패도(산가, 과산화물가, 카르보닐가)를 측정하여 쇼트닝 약과의 유지안정성을 비교 분석한 결과 다음과 같았다. 1. 약과 반죽의 유지 함량은 9.33%였으나, 튀김 후 시료 구별 약과의 유지함량은 25.20-29.12%로서 아주 높았다. 이들 약과의 유지 구성은 반죽에 첨가되었던 원료유지와 튀김에 사용된 튀김유(대두유)의 비율이 각각 16-10%와 84-90%로서 튀김유가 대부분을 차지하였다. 2. 모든 약과의 지방산 조성은 쇼트닝의 첨가수준에 관계 없이 시료구간에 거의 유사하여 linoleic acid 49.71-51.27%, oleic acid 26.05-26.77%, palmitic acid 10.07-11.71%, linolenic acid 5.51-5.72% stearic acid 4.51-4.68%였으며, 이것은 튀김유(대두유)의 지방산 조성과 유사하였다. 3. 쇼트닝 첨가에 따른 약과의 저장중 산가, 과산화물가, 카르보닐가의 변화는 쇼트닝 첨가가 산가의 증가를 다소 지연시켰으나 과산화물가와 카르보닐가는 시료구간에 차이를 나타내지 않았다. 약과 제조시에 반죽에 첨가되는 유지의 지방산 조성이 크게 다르더라도 약과의 유지 산패도는 큰 차이를 보이지 않았다. 이것은 튀김 과정 중 튀김유가 약과내로 다량 흡유되어 약과반죽의 원료유지보다도 큰 영향을 준 것으로 생각된다. 따라서 쇼트닝은 약과 반죽에 참기름 대용으로 사용될경우 약과의 유지 산패 면에서는 참기름 100% 약과와 차이가 없어 약과 제조시 참기름 대체효과가 있을 것으로 기대된다.

• 동아시아식생활학회지
• /
• 제18권2호
• /
• pp.181-189
• /
• 2008

In this study, changes in total trans fatty acid (tFA) and fat contents were determined in soybean oil, shortening, and olive oil after potato sticks were fried 30 consecutive times, respectively. Prior to frying, the potato sticks contained 3.8% fat, with 43.2% tFAs, After the first frying in soybean oil, the total tFA content of the potato sticks sharply decreased to 3.2%, and then it gradually increased to 8.1 % after 30 consecutive times of frying. However, the total fat content of the potato sticks, fried in soybean oil increased to 15.2% after the first frying and thereafter it decreased to 9.75% with 30 repeated episodes of frying. When the potato sticks were fried in olive oil, similar changes in tFA and fat contents were shown; while such changes were not observed when shortening was used. After 30 consecutive frying events, the tFA contents in the soybean oil and olive oil increased to 4.15 and 5.75%, respectively; however, such an increase was not observed in the shortening. One can assume that most of the tFAs in the fried oils were from the potato sticks, which contained relatively high tFA content during the repeated deep-frying process.

• 상하수도학회지
• /
• 제24권2호
• /
• pp.203-210
• /
• 2010

The signification of calorie/water (C/W) ratio was investigated in the treatment of highly concentrated organic wastes by thermophilic oxic process (TOP). Swine waste was used in this study. When C/W ratio was 1.6, most of swine waste was decomposed and all water was evaporated in the 24-h injection cycle. To improve treatment efficiency of TOP treating swine waste, the effect of shortening the swine waste injection cycle was examined. The shortening of injection cycle was conducted to stimulate the activity of thermophilic bacteria. A high temperature in the reactor was maintained by shortening of the injection cycle. When the swine waste injection cycle was shortened, the C/W ratio was fixed at 1.6. As a result, by shortening the swine waste injection cycle from 24-h to 12 and 6-h, the maximum loading rate of swine waste per day could be improved 1.9 and 3.5 times, respectively.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.989-1003
• /
• 2014

In the preliminary design stage of an RC 3D-frame, repeated sequential analyses to determine optimal members' sizes and the investigation of the parameters required to minimize the differential column shortening are computational effort consuming, especially when considering various types of loads such as dead load, temperature action, time dependent effects, construction and live loads. Because the desired accuracy at this stage does not justify such luxury, two backpropagation feedforward artificial neural networks have been proposed in order to approximate this information. Instead of using a commercial software package, many references providing advanced principles have been considered to code a program and generate these neural networks. The first one predicts the typical amount of time between two phases, needed to achieve the minimum maximorum differential column shortening. The other network aims to prognosticate sequential analysis results from those of the simultaneous analysis. After the training stages, testing procedures have been carried out in order to ensure the generalization ability of these respective systems. Numerical cases are studied in order to find out how good these ANN match with the sequential finite element analysis. Comparison reveals an acceptable fit, enabling these systems to be safely used in the preliminary design stage.