• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.430-441
• /
• 2023

Velvet antler is widely used as a traditional medicine, and numerous studies have demonstrated its tremendous nutritional and medicinal values including immunity-enhancing effects. This study aimed to investigate different deer velvet extracts (Sample 1: raw extract, Sample 2: dried extract, and Sample 3: freeze-dried extract) for proximate composition, uronic acid, sulfated glycosaminoglycan, sialic acid, collagen levels, and chemical components using ultra-performance liquid chromatography-quadrupole-time-of-light mass spectrometry. In addition, we evaluated the cytotoxic effect of the deer velvet extracts on BV2 microglia, HT22 hippocampal cells, HaCaT keratinocytes, and RAW264.7 macrophages using the cell viability MTT assay. Furthermore, we evaluated acute toxicity of the deer velvet extracts at different doses (0, 500, 1000, and 2000 mg/kg) administered orally to both male and female ICR mice for 14 d (five mice per group). After treatment, we evaluated general toxicity, survival rate, body weight changes, mortality, clinical signs, and necropsy findings in the experimental mice based on OECD guidelines. The results suggested that in vitro treatment with the evaluated extracts had no cytotoxic effect in HaCaT keratinocytes cells, whereas Sample-2 had a cytotoxic effect at 500 and 1000 ㎍/mL on HT22 hippocampal cells and RAW264.7 macrophages. Sample 3 was also cytotoxic at concentrations of 500 and 1000 ㎍/mL to RAW264.7 and BV2 microglial cells. However, the mice treated in vivo with the velvet extracts at doses of 500-2000 mg/kg BW showed no clinical signs, mortality, or necropsy findings, indicating that the LD50 is higher than this dosage. These findings indicate that there were no toxicological abnormalities connected with the deer velvet extract treatment in mice. However, further human and animal studies are needed before sufficient safety information is available to justify its use in humans.

• Economic and Environmental Geology
• /
• v.47 no.3
• /
• pp.205-217
• /
• 2014

As Mt. Backdu is expected to erupt, the social and economic impacts of the eruption on the Korean peninsula as well as on the world become a research topic of interest. If the volcano erupts, South Korea can be directly impacted by volcanic ash, which will bring out secondary damages in various ways. Given that the direct damage is a basis to estimate indirect and secondary damages, this paper was to review a method to estimate direct damages, called catastrophe risk models, and estimate the direct damages of available eruption scenarios of Mt. Baekdu. Based on the results, the damages by volcanic ash will occur mostly around Gangwon province if the Mt. Backdu erupts. Thus the inventory lists and their damage functions of Gangwon provinces were collected. In particular agricultural and forestry products were surveyed based on the land use. Direct damages were estimated using volcanic ash distribution of eruption scenarios, inventory information and their damage functions. In result, a scenario in winter caused the damage of 299.8 billion KRW (20.4% of total agricultural production in 2010) and 28.9 billion KRW (9.0% of total forestry production in 2010) in agriculture and forestry, respectively. The damages in agriculture was larger, and it is due to the damage functions which show the agricultural products are more vulnerable to volcanic ash than forestry products. Also the agricultural production (1,471.7 billion KRW in 2010) are more than 4.5 times the forestry production (322.3 billion KRW in 2010) in Gangwon province. Inje and Gangnung had the most damages in the scenario in winter. Inje had the most damage due to the thick ash deposit (8.5 mm in average) despite the low production. On the other hand, Goseong had a low damage compared to the ash thickness larger than 20mm, owing to the low production. The direct damage estimated through this process can be used to estimate indirect damages.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.463-471
• /
• 2017

The purpose of this study was to examine the causes of career interruptions among dental hygienists, institutional measures required for their long service and ways of creating a stable employment culture for them in determine how to resolve labor shortage, create stable jobs, and step up the reemployment of idle manpower. In addition, the following suggestions are made for the establishment of a stable employment culture for dental hygienists by analyzing related literature, research materials, and information such as forums for establishing appropriate jobs for female dental workers. First, a system should be set up to prevent career interruption among dental hygienists. The work environment should be improved to prevent career breaks, and the wages, working hours, and working style should be efficiently structured to maintain the tenure of employees. Second, a plan should be devised to make use of idle manpower, and a variety of necessary programs should be developed. With respect to regular working hours, the time conversion system should be used, which reduces the amount of time one would want to work while receiving a national subsidy. Third, dental hygienists working in different occupations for marriage, childbirth, childcare, school and personal hygiene should make a way to return to the dental system immediately when they want. Fourth, the government should take institutional measures and offer down-to-earth support and benefits for women consideration their social characteristics to guarantee a balance between work and childcare.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.1
• /
• pp.101-116
• /
• 2008

Most who were polled stated that they use the internet everyday. Also, it is undeniable that Internet has become one of the popular shopping markets with the spatial-convenience and time-saving it provides. With the growth of Internet and Internet shopping malls, effects on clothing purchasing of adolescents. The purpose of this study was to investigate the clothing shopping orientation and Internet clothing purchasing type of high school students. Subjects were 685(male 354, female 331) high school students located in Jeollabukdo province. In this statistical analysis, SPSS 11.5 for Windows Program. These data were analyzed by factor analysis, $x^2$ test, t-test, One-way Anova, Duncan' multiple range, Pearson's correlation coefficient. The results of this study were as follows. Six dimensions of clothing shopping orientation were derived by factor analysis: fashion hedonic shopping brand ostentation time convenience economic esthetics orientation. The clothing purchasing type in Internet had 3 factors(convenience active impulse buying economic pursuit). The groups were significantly different in regard to clothing shopping orientation, clothing purchasing type in Internet shopping mall according to demographic variables(gender, educational background of parents, a school record). Clothing shopping orientation variables had positive correlations except of hedonic shopping economic orientation with clothing purchasing type in Internet. As a conclusion, high school students' shopping orientation and purchasing type of apparel in Internet shopping mall constituted important characteristics which could affect directly Internet purchase behavior of adolescents. These results should be fundamental information for clothing and textile education in secondary school.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.1
• /
• pp.15-20
• /
• 2021

Purpose This article studies the relationship between the length of a kidney measured by two scanning methods: Kidney Computed Tomography (CT) and ^99mTc-Dimercaptosuccinic acid (DMSA) renal scan. Kidney CT provides a better anatomic assessment, while ^99mTc-DMSA renal scan is superior in the kidney function test. Materials and Methods From January to December of 2019, two hundred patients who had Kidney CT and Tc^99m-DMSA renal scan were chosen for this study. SPSS17.0 was selected for statistical analysis. Results Due to the effect of the breathing and resolution of ^99mTc-DMSA renal scan, it showed the kidney's relatively longer length than the length of Kidney CT. For the same kidney, the length comparison among different brands' Gamma cameras was negligible. The length difference within the same age group did not show a noticeable discrepancy. However, there was a length difference between the radio technologists. Kidney CT and ^99mTc-DMSA renal scan indicated a strong positive correlation between the length of the left and right kidney. Conclusion It is necessary to establish a standardized measurement method for measuring kidney length using ^99mTc-DMSA renal scan. The kidney's functional changes and length changes are indications of Kidney diseases. Especially, pediatric patients tend to use ^99mTc-DMSA renal scan for assessing the kidney's shape and the function to avoid potential radiation exposure during the Kidney CT. Therefore, it is significant to provide not only the kidney's functional information but also an anatomic analysis, including the kidney's size, length, and location through the ^99mTc-DMSA renal scan.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.11
• /
• pp.471-480
• /
• 2023

The Korean construction order volume in South Korea grew significantly from 91.3 trillion won in public orders in 2013 to a total of 212 trillion won in 2021, particularly in the private sector. As the size of the domestic and overseas markets grew, the scale and complexity of EPC (Engineering, Procurement, Construction) projects increased, and risk management of project management and ITB (Invitation to Bid) documents became a critical issue. The time granted to actual construction companies in the bidding process following the EPC project award is not only limited, but also extremely challenging to review all the risk terms in the ITB document due to manpower and cost issues. Previous research attempted to categorize the risk terms in EPC contract documents and detect them based on AI, but there were limitations to practical use due to problems related to data, such as the limit of labeled data utilization and class imbalance. Therefore, this study aims to develop an AI model that can categorize the contract terms based on the FIDIC Yellow 2017(Federation Internationale Des Ingenieurs-Conseils Contract terms) standard in detail, rather than defining and classifying risk terms like previous research. A multi-text classification function is necessary because the contract terms that need to be reviewed in detail may vary depending on the scale and type of the project. To enhance the performance of the multi-text classification model, we developed the ELECTRA PLM (Pre-trained Language Model) capable of efficiently learning the context of text data from the pre-training stage, and conducted a four-step experiment to validate the performance of the model. As a result, the ensemble version of the self-developed ITB-ELECTRA model and Legal-BERT achieved the best performance with a weighted average F1-Score of 76% in the classification of 57 contract terms.

• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.468-478
• /
• 2004

It is essential in various application areas of data mining and bioinformatics to effectively retrieve the occurrences of interesting patterns from sequence databases. For example, let's consider a network event management system that records the types and timestamp values of events occurred in a specific network component(ex. router). The typical query to find out the temporal casual relationships among the network events is as fellows: 'Find all occurrences of CiscoDCDLinkUp that are fellowed by MLMStatusUP that are subsequently followed by TCPConnectionClose, under the constraint that the interval between the first two events is not larger than 20 seconds, and the interval between the first and third events is not larger than 40 secondsTCPConnectionClose. This paper proposes an indexing method that enables to efficiently answer such a query. Unlike the previous methods that rely on inefficient sequential scan methods or data structures not easily supported by DBMSs, the proposed method uses a multi-dimensional spatial index, which is proven to be efficient both in storage and search, to find the answers quickly without false dismissals. Given a sliding window W, the input to a multi-dimensional spatial index is a n-dimensional vector whose i-th element is the interval between the first event of W and the first occurrence of the event type Ei in W. Here, n is the number of event types that can be occurred in the system of interest. The problem of‘dimensionality curse’may happen when n is large. Therefore, we use the dimension selection or event type grouping to avoid this problem. The experimental results reveal that our proposed technique can be a few orders of magnitude faster than the sequential scan and ISO-Depth index methods.hods.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2011

Design and Implementation of Clipcast Service via Terrestrial DMB This paper outlines the system design and the implementation process of clipcast service that can send clips of video, mp3, text, images, etc. to terrestrial DMB terminals. To provide clipcast service in terrestrial DMB, a separate data channel needs to be allocated and this requires changes in the existing bandwidth allocation. Clipcast contents can be sent after midnight at around 3 to 4 AM, when terrestrial DMB viewship is low. If the video service bit rate is lowered to 352 Kbps and the TPEG service band is fully used, then 320 Kbps bit rate can be allocated to clipcast. To enable clipcast service, the terminals' DMB program must be executed, and this can be done through SMS and EPG. Clipcast service applies MOT protocol to transmit multimedia objects, and transmits twice in carousel format for stable transmission of files. Therefore, 72Mbyte data can be transmitted in one hour, which corresponds to about 20 minutes of full motion video service at 500Kbps data rate. When running the clip transmitted through terrestrial DMB data channel, information regarding the length of each clip is received through communication with the CMS(Content Management Server), then error-free files are displayed. The clips can be provided to the users as preview contents of the complete VOD contents. In order to use the complete content, the user needs to access the URL allocated for that specific content and download the content by completing a billing process. This paper suggests the design and implementation of terrestrial DMB system to provide clipcast service, which enables file download services as provided in MediaFLO, DVB-H, and the other mobile broadcasting systems. Unlike the other mobile broadcasting systems, the proposed system applies more reliable SMS method to activate the DMB terminals for highly stable clipcast service. This allows hybrid, i.e, both SMS and EPG activations of terminals for clipcast services.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.4
• /
• pp.49-57
• /
• 2015

This research is to analyze the mediating effect of product innovation between work-life balance (work-family balance, work-leisure balance and work-development balance) and corporate performance in venture SMEs. We test four hypothesis. First, we test the hypothesis that work-life balance has a positive effect on product innovation. Second, we test the hypothesis that product innovation has a positive effect on corporate performance. Third, we test the hypothesis that work-life balance has a positive effect on corporate performance. Fourth, we test a positive mediating role of product innovation between work-life balance and corporate performance. For this research, we administered the questionnaire surveys, and got the 162 effective data of korean venture SMEs. We use CFA and SEM analysis of research model by AMOS 18.0. As a result, we can find the four meaningful results. First, work-life balance, especially only work-development balance, has a positive effect on product innovation. Second, product innovation has a positive effect on corporate performance. Third, the relationships between work-life balance (work-family balance, work-leisure balance and work-development balance) and corporate performance are no significant after the mediating variable (product innovation) is added. Fourth, product innovation has a positive mediating effect between work-life balance, especially only work-development balance, and corporate performance. Although this research has some limitations of generalization because of the limited size of samples, we has meaningful information related to the venture companies in the academic and business field. Additionally, the Multiple Indicator Multiple Cause(MIMIC) model is recommended in the future research.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.345-352
• /
• 2009

This study utilized 332,625 records of linear type scores consisting for 15 primary traits, 22,175 final score and 84,612 pedigree information of 22,175 Holstein cows from 1993 to 2007 in Korea to estimate genetic parameters for 16 type traits. Genetic and error (co)variances between two traits selected from 16 traits were estimated using bi-trait pairwise analyses with DFREML package. The estimated heritabilities for stature (ST), strength (STR), body depth (BD), dairy form (DF), rump angle (RA), thurl width (TW), rear legs side view (RLSV), foot angle (FA), fore udder attachment (FUA), rear udder height (RUH), rear udder width (RUW), udder cleft (UC), udder depth (UD), front teat placement (FTP), front teat length (FTL) and final score (FS) were 0.31, 0.21, 0.25, 0.10, 0.29, 0.19, 0.09, 0.06, 0.12, 0.13, 0.12, 0.08, 0.26, 0.20, 0.28 and 0.15, respectively. ST had the highest positive genetic correlation with BD (0.90), while RLSV had the highest negative genetic correlation with FA (-0.56). RA had negative genetic correlation with most udder traits (-0.17~-0.02). Especially, RUW had the higher positive genetic correlation with STR (0.60), BD (0.62), and TW (0.49), however, UD had the higher negative genetic correlation with STR (-0.40) and BD (-0.40). FTL had negative genetic correlation with FUA, RUH, RUW, UC and UD. FS had positive genetic correlation with UC, UD and FTP (0.12, 0.18 and 0.20). However, additional research is needed on the use of these parameters in the genetic evaluation because estimated genetic and error variance-covariance matrices were not positive definite.