• Title/Summary/Keyword: use condition

Search Result 5,772, Processing Time 0.034 seconds

Hermetic Characteristics of Negative PR (Negative PR의 기밀 특성)

  • Choi, Eui-Jung;Sun, Yong-Bin
    • Journal of the Semiconductor & Display Technology
    • /
    • v.5 no.2 s.15
    • /
    • pp.33-36
    • /
    • 2006
  • Many issues arose to use the Pb-free solder as adhesive materials in MEMS ICs and packaging. Then this study for easy and simple sealing method using adhesive materials was carried out to maintain hermetic characteristic in MEMS Package. In this study, Hermetic characteristic using negative PR (XP SU-8 3050 NO-2) as adhesive at the interface of Si test coupon/glass substrate and Si test coupon/LTCC substrate was examined. For experiment, the dispenser pressure was 4 MPa and the $200\;{\mu}m{\Phi}$ syringe nozzle was used. 3.0 mm/sec as speed of dispensing and 0.13 mm as the gap between Si test coupon and nozzle was selected to machine condition. 1 min at $65^{\circ}C$ and 15 min at $95^{\circ}C$ as Soft bake, $200\;mj/cm^2$ expose in 365 nm wavelength as UV expose, 1 min at $65^{\circ}C$ and 6 min at $95^{\circ}C$ as Post expose bake, 60 min at $150^{\circ}C$ as hard bake were selected to activation condition of negative PR. Hermetic sealing was achieved at the Si test coupon/ glass substrate and Si test coupon/LTCC substrate. The leak rate of Si test coupon/glass substrate was $5.9{\times}10^{-8}mbar-l/sec$, and there was no effect by adhesive method. The leak rate of Si test coupon/LTCC substrate was $4.9{\times}10^{-8}mbar-l/sec$, and there was no effect by dispensing cycle. Better leak rate value could be achieved to use modified substrate which prevent PR flow, to increase UV expose energy and to use system that controls gap automatically with vision.

  • PDF

A Study on the Factors Promoting the Use of Memory-based Emotion in Evaluating the Brand (상표평가에서 기억감정의 이용을 촉진하는 요인에 관한 연구)

  • Choi, Nak-Hwan;Na, Ji-Eun
    • Journal of Global Scholars of Marketing Science
    • /
    • v.13
    • /
    • pp.49-70
    • /
    • 2004
  • Recently, consumer researchers have suggested that consumers evaluate brand by subjective memory-based-emotion which was formed by their experience. However, relatively little consumer research has been done to explore conditions under which memory-based-emotion is used in brand evaluation. Therefore, this study explored the conditions to facilitate usage of memory-based- emotion such as accessibility, representativeness, relevance of consumption goal, when consumers evaluate brand. In addition, we investigated the factors that influence responses of memory-based- emotion, such as similarity of encoding and retrieving condition and level of organization. The results of this study suggest that level of organization was positively related to accessibility and representativeness. But similarity of encoding and retrieving condition was not related to them. And accessibility, representativeness influence on use of memory-based-emotion in consumer brand evaluation. But relevance of consumption goal did not influence on use of memory-based-emotion in consumer brand evaluation.

  • PDF

A Study on The transducer of acoustic sensor to be Single-mode FBG using Hopper Type WDM be in the Making (Hopper type WDM을 이용한 단일모드 FBG(Fiber Bragg Grating)음향센서 트랜스듀서 개발연구)

  • Kim, Kyung Bok
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.10
    • /
    • pp.256-263
    • /
    • 2014
  • We have designed and made three kinds of FBG(Fiber Bragg Grating) Acoustic Transducer using Hopper type WDM on the use of recently developed FBG in Korea. The newly designed three kinds of FBG Acoustic Transducer using Hopper type WDM have an excellent merit of practical use with simple structure of sensors arm as well as the merit with existing fiber sensors. It was possible to detect sound waves in the range of 10 Hz to 18 kHz through the newly designed three kinds of FBG Acoustic Transducer and also, possible to detect its signal within the maximum range of 8.6 m by the use of most suitable resonance condition of the transducer. Especially, we can expect the utilization of low-frequency signal detection instead of existing acoustic sensor in the environment of electric noise and inferior condition. Furthermore, they can be developed as the high-sensibility and multi-point signal detection system through the sensor array system.

Survey of Preference and Present Use of Convenience Foods for North Korean Refugees (새터민들의 편의식품에 대한 선호도와 이용현황에 관한 연구)

  • Lee, Eun-Jung;Kim, Eun-Mi
    • Culinary science and hospitality research
    • /
    • v.20 no.6
    • /
    • pp.147-158
    • /
    • 2014
  • The purpose of this study is to investigate the preference and present use condition of convenience foods for North Korean refugees in South Korea. Questionnaires were completed by 211 North Korean refugees and data was analyzed with SPSS software. The preference for convenience foods of half of the questionnaires was investigated as 'moderate'. More than half of the North Korean refugees enjoy eating the convenience foods. They enjoy them as a snack. The reason to eat convenience foods is due to the convenience(n=122, 57.8%), and taste(n=42, 10.0%). North Korean refugees under the age of 29 years think the fastfood is good due to the convenience and taste. The longer the period of residence in South Korea, the less they enjoy convenience foods. The reason to choose the convenience foods is 'good for health', 'convenient', 'exotic', and 'economical'. The results suggest that it is necessary to educate people to buy reasonably by understanding the relationship between the convenience foods and health.

GPS Software Development for Calculation of Cadastral Control Points (지적기준점 성과계산을 위한 GPS 소프트웨어 개발)

  • 우인제;이종기;김병국;이민석
    • Spatial Information Research
    • /
    • v.12 no.1
    • /
    • pp.101-110
    • /
    • 2004
  • Research that establish new cadastral survey model that use GPS to introduce GPS observation technique in cadastral survey and research that develop connection technologies are now abuzz. The purpose of this research is to keep in step in such trend and grasp present condition and performance of surveying connection to common use GPS data processing software, and analyze data processing algorithm, and develop suitable GPS data processing software in our real condition regarding GPS data processing and result of control point calculation. This research studies analysis common use software and error occurrence by data processing method that college and company have. Also, It analyzes algorithm that is applied to existing GPS data processing software. After that we study algorithm that is most suitable with cadastral survey and then develop cadastral survey calculation software for new cadastral control points.

  • PDF

Garments Waterproofness Test Using Rain Tower System (인공강우시스템을 활용한 의복의 방수성능 평가)

  • Cha, Hee Chul;Park, Jun Ho;Lim, Jee Young;Shim, Huen Sup
    • Fashion & Textile Research Journal
    • /
    • v.17 no.6
    • /
    • pp.1013-1019
    • /
    • 2015
  • As the interest in leisure and health increases, the domestic outdoor wear industry becomes bigger. The waterproofness of fabrics does not ensure the waterproofness of garments because of the stitch holes during the sewing process even with the seam sealing tapes. Thus the water leakage often becomes a problem during the end use. Still companies use fabrics waterproofness data for garments marketing because they are simple to run the test, less expensive than the whole garment testing, and easy to achieve the quality control. In this study the rain tower system for evaluating the waterproofness of garments has been developed and the waterproofness of the selected waterproof and breathable garments in the market were tested. The rain tower was consisted of rain tower room, rainfall forming system and measurement system. Two different levels of rainfall can be simulated with this system(100l/m2/hr and 450l/m2/hr). Jackets in the market have been tested at two different rainfall conditions. The temperature and humidity data inside jackets didn't provide much information on the waterproofness at severe rainfall condition(450l/m2/hr, 1 hour). However, water leakage was detected on the cotton undershirt inside jacket. 5 out of 8 jackets passed the normal rainfall condition(100l/m2/hr, 30 minutes). The newly developed rain tower system was able to evaluate the waterproofness of the jacket seams. It is recommended the further study on the detailed test conditions for the end use of the waterproof and breathable garments.

Analyzing the Changes in Speed Due to High Occupancy Vehicles Using Median Bus Lane (다인승차량의 중앙버스전용차로 이용에 따른 영향분석)

  • Lee, Jung-Beom
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.12 no.4
    • /
    • pp.87-94
    • /
    • 2013
  • This study estimated the changes in delays and speeds of vehicles in exclusive bus lane and road when the High Occupancy Vehicles(HOV) use the median bus lane. Synchro simulation tool was used to optimize the traffic signal time on the network and VISSIM was applied to simulate various scenarios. Here, drivers behavior parameters in VISSIM was optimized using Simultaneous Perturbation Stochastic Approximation(SPSA) algorithm in order to represent real traffic condition. Based on the simulation results, the delay in Doan daero was decreased when the volume of HOV in current condition runs on the median bus lane, whereas delay in Doan dongro was increased in all scenarios. The changes in bus speed was not sharply decreased for both study sites, even though the number of HOV increased to 10%. Thus, it could be allowed that the HOV use the median bus lane in Doan dongro and Doan daero. Future research tasks include studying about changes in delay when the HOV use the curb bus lane.

A Study on the Medical Care System using Essential Oil (메디컬피부케어를 위한 에센셜 오일 적용방법에 대한연구)

  • Lee, Ae-Sun
    • Journal of the Korean Society of Fashion and Beauty
    • /
    • v.5 no.3
    • /
    • pp.111-117
    • /
    • 2007
  • Essential oils aims to rejuvenate and beautify medical skin care the body through the use of essential oils, and generally to improve our outward appearance. Much of this section fouses on the different methods by which essential oils can be used to improve the complexion or to treat specific medical care skin conditions. Beauty, however, is not just skin-deep. The condition of the medical care express the overall health of an individual. A relaxed attitude, together with a well-balanced diet, enough exercise, and a daily intake of plenty of spring water or herbal teas, all help to keep the system in top condition. Essential oils is a healing art which has powerful effects on both mind and body. The vital element in essential oils is the pure oils which are extracted from various part of different plants. The key to medical aromatherapy care lies in its dual use of essential oils and medical care massage, thus masking full use of two of our most important senses-smell and touch. Medical aromatherapy care is holistic, working mainly on the nervous system and including the head and body as part of the same treatment. Using pressure points along the spine, Medical aromatherapy care on the autonomic nervous system and has an immediate effect of relexation. In directly it also acts on mood. Many of the medical massage movements help lymphatic drainage. Essential oils have many different qualities; they can be relaxing or invigorating and are generally antisepic and antibacterial. Medical aromatherapy care can have psychological benefits. The power of essences in healing has been recognized in the treatment of insect bites. Clove, thyme, sandalwood, and lavender are a few of the essences that have antiseptic. Essential oils effect the dry skin for small visual pores, dull matte finish, rough sandy feeling, tantskin. Essential oils effect the mature/sun damaged skin for some red or couperose areas, loose saggy skin, exposure to a lot of ultraviolet light. Essential oils effect the medical care nomal skin good elasticity, healthy color(good circulation), smooth terture.

  • PDF

Improvement of Biotope-Area-Ratio-Indicator and Appraisal System Applicable to Environmental Impact Assessment Projects (환경영향평가 대상사업에 적용가능한 생태면적률 지표 평가체계 개선)

  • Lee, Gwan-Gyu;Lee, Sang-Hyuk;Kim, Gyung-Ho;Lee, Jung-Hwan
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.14 no.5
    • /
    • pp.113-125
    • /
    • 2011
  • Since the government of Korea (Ministry of Environment, MOE) introduced the policy applying 'Biotope-Area-Ratio-Indicator (BARI)' to huge residential land developments which Environmental Impact Assessment (EIA) should be performed, MOE has come to have the necessity to apply the indicator concretely at the stage of Prior Environment Review System (PERS) and EIA in various types of large scale land development projects. This study was conducted with the aim of supporting the application of BARI and related decision making in various other types of EIA projects as well as residential development projects through remodeling the system to apply the indicator of the past. Through the analysis of the problems in applying the past BARI and experimental appraisals to 11 types of EIA projects, the results and implications as follows were drawn. First, it's possible to extend the range of applications of BARI, which has been applied to only residential land development project, to all kinds of projects with area-typed land use pattern out of environmental impact assessment target projects. Second, it's also possible to set a target value into which regional characteristics and differences among locational properties are reflected. In addition, it's come to be able to differentially apply the target value of BARI according to the condition of the existing site. Third, it's improved to be able to suggest a macroscopic target value at the stage of PERS and to set detailed target values in each detailed land use at the stage of EIA. The key point underlies inducing methodology to determine target values to secure more permeable land coverage ratio for detailed land use patterns at the stage of EIA by making it possible to calculate BARI of the present land cover condition of the EIA target projects.

Rotation Point of Laterally Loaded Pile Under Multi Layered Soil (다층지반 하에서 수평하중을 받는 말뚝의 회전점)

  • Kang, Beong-Joon;Kyung, Doo-Hyun;Hong, Jung-Moo;Lee, Jun-Hwan
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2008.10a
    • /
    • pp.708-712
    • /
    • 2008
  • Piles and pile foundations have been in common use since very early times. Usually function of piles is to carry load to a depth at which adequate support is available. Another important use of piles is to furnish lateral support and nowadays it is getting highlighted due to the wind load, lateral action of earthquake, and so on. After Broms (1964), many researchers have been suggested methods for estimating lateral capacity of pile. But each method assumes different earth pressure distribution and lateral earth pressure coefficient and it gives confusion to pile designers. Lateral earth pressure, essential in lateral capacity estimation, influenced by pile's behavior under lateral load. Prasad and Chari (1999) assumed the rotation point of pile and suggested an equation of ultimate lateral load capacity. In this study, we investigate the depth of rotation point in both homogeneous soil and multi layered soil, and compare to the estimation value by previous research. To model the pile set up in the sand, we use the chamber and small scale steel pile, and rain drop method. Test results show the rotation point is formed where the Prasad and Chari's estimation value, and they also show multi layered condition affects to location of rotation point to be scattered.

  • PDF