• Title/Summary/Keyword: use behaviors

Search Result 1,782, Processing Time 0.028 seconds

Rheological Properties of Gelatinized Model Foods (모형식품의 리올로지 특성)

  • Chun, Ki-Chul;Park, Young-Deok;Chang, Kyu-Seob
    • Korean Journal of Agricultural Science
    • /
    • v.22 no.1
    • /
    • pp.103-109
    • /
    • 1995
  • The model foods were prepared by simulating mositure, protein and starch, and they were heated for 30 mins, at $80^{\circ}C$ and then cooled at $25^{\circ}C$ in water bath. Their rheological properties were investigated by the use of Brookfield wide-gap rotational viscometer at $30{\sim}60^{\circ}C$, and the rotation speed ranged from 0.6 to 6 rpm and solid content ranged from 8% to 11%, the results obtained were as follows. 1. All the model foods ($P_1S_3$, $P_2S_2$, $P_1S_1$, $P_2S_1$, $P_3S_1$, $P_4S_0$) exhibited pseudoplastic behaviors with yeild stress and were thixotropic foods which showed time - dependent structural decays, but the starch food of 8 ~ 11 % solid content did not show the flow behavior. 2. The correlation between the rheological parameters and the protein content of model foods in various moisture content did not appeared a constant relationship. 3. The change of shear stress against shear rate in high starch foods was larger than that in high protein foods and the structure at initial shear time was decayed with a quatic equation according to the Tiu's Model and structural decay was in parallel with the increase of shear rate. 4. The temperature dependency of the apparent viscosity of $P_1S_2$, and $P_2S_1$ was fully expressed by Arrhenius equation and activation energies of their food were 2.35 and $1.34Kcal/g{\cdot}mol$, respectively.

  • PDF

Efficient Adaptive Finite Element Mesh Generation for Dynamics (동적 문제에 효율적인 적응적 유한요소망)

  • Yoon, Chongyul
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.26 no.5
    • /
    • pp.385-392
    • /
    • 2013
  • The finite element method has become the most widely used method of structural analysis and recently, the method has often been applied to complex dynamic and nonlinear structural analyses problems. Even for these complex problems, where the responses are hard to predict, finite element analyses yield reliable results if appropriate element types and meshes are used. However, the dynamic and nonlinear behaviors of a structure often include large deformations in various portions of the structure and if the same mesh is used throughout the analysis, some elements may deform to shapes beyond the reliable limits; thus dynamically adapting finite element meshes are needed in order for the finite element analyses to be accurate. In addition, to satisfy the users requirement of quick real run time of finite element programs, the algorithms must be computationally efficient. This paper presents an adaptive finite element mesh generation scheme for dynamic analyses of structures that may adapt at each time step. Representative strain values are used for error estimates and combinations of the h-method(node movement) and the r-method(element division) are used for mesh refinements. A coefficient that depends on the shape of an element is used to limit overly distorted elements. A simple frame example shows the accuracy and computational efficiency of the scheme. The aim of the study is to outline the adaptive scheme and to demonstrate the potential use in general finite element analyses of dynamic and nonlinear structural problems commonly encountered.

Seismic Performance of Reinforced Concrete Shear Wall Buildings with Piloti (필로티를 갖는 철근콘크리트 전단벽식 건물의 내진성능)

  • Kwon Young-Wung;Kim Min-Su
    • Journal of the Korea Concrete Institute
    • /
    • v.17 no.4 s.88
    • /
    • pp.587-594
    • /
    • 2005
  • The purpose of seismic design is to ensure the serviceability of buildings against earthquake, which might be occurred during the service life of buildings, and to minimize the loss of life by preventing their failure under strong earthquake. The lack resistance of walls resulting from a tendency toward high-rise apartment buildings with shear walls and use of piloti would lead to a concentration of inelastic behaviors in their weak story. In this study, the seismic performance of reinforced concrete shear wall buildings haying piloti was analyzed by using the evaluation techniques which was proposed by FEMA 273 and ATC-40. The results from comparison with these two techniques are summarized as follows.; The results of elastic analysis method for seismic performance evaluation show that the effect of piloti and building height decrease performance index. In case of shear wall building, the state of insufficient shear stress governs their overall performance and it becomes evident in the case of the buildings with more than 25 stories. For the buildings of piloti, the change of mass, weak story, as well as insufficient shear stress, decrease the performance index rapidly compared with the performance index of the buildings without piloti. The results, obtained from the nonlinear static analysis using capacity spectrum method, indicate that the performance Point increases for the structure having Piloti and high story. Also, deformation limits of buildings satisfy the allowable criteria at the life safety level, but the immediate occupancy level is exceeded in buildings which have more than 25 stories.

USN's Efforts to Rebuild its Combat Power in an Era of Great Power Competition (강대국 간의 경쟁시대와 미 해군의 증강 노력)

  • Jung, Ho-Sub
    • Strategy21
    • /
    • s.44
    • /
    • pp.5-27
    • /
    • 2018
  • The purpose of this paper is to look at USN's efforts to rebuild its combat power in the face of a reemergence of great powers competition, and to propose some recommendations for the ROKN. In addition to the plan to augment its fleet towards a 355-ships capacity, the USN is pursuing to improve exponentially combat lethality(quality) of its existing fleet by means of innovative science and technology. In other words, the USN is putting its utmost efforts to improve readiness of current forces, to modernize maintenance facilities such as naval shipyards, and simultaneously to invest in innovative weapons system R&D for the future. After all, the USN seems to pursue innovations in advanced military Science & Technology as the best way to ensure continued supremacy in the coming strategic competition between great powers. However, it is to be seen whether the USN can smoothly continue these efforts to rebuild combat strength vis-a-vis its new competition peers, namely China and Russian navy, due to the stringent fiscal constraints, originating, among others, from the 2011 Budget Control Act effective yet. Then, it seems to be China's unilateral and assertive behaviors to expand its maritime jurisdiction in the South China Sea that drives the USN's rebuild-up efforts of the future. Now, some changes began to be perceived in the basic framework of the hitherto regional maritime security, in the name of declining sea control of the USN as well as withering maritime order based on international law and norms. However, the ROK-US alliance system is the most excellent security mechanism upon which the ROK, as a trading power, depends for its survival and prosperity. In addition, as denuclearization of North Korea seems to take significant time and efforts to accomplish in the years to come, nuclear umbrella and extended deterrence by the US is still noting but indispensible for the security of the ROK. In this connection, the naval cooperation between ROKN and USN should be seen and strengthened as the most important deterrents to North Korean nuclear and missile threats, as well as to potential maritime provocation by neighboring countries. Based on these observations, this paper argues that the ROK Navy should try to expand its own deterrent capability by pursuing selective technological innovation in order to prevent this country's destiny from being dictated by other powers. In doing so, however, it may be too risky for the ROK to pursue the emerging, disruptive innovative technologies such as rail gun, hypersonic weapon... etc., due to enormous budget, time, and very thin chance of success. This paper recommends, therefore, to carefully select and extensively invest on the most cost-effective technological innovations, suitable in the operational environments of the ROK. In particular, this paper stresses the following six areas as most potential naval innovations for the ROK Navy: long range precision strike; air and missile defense at sea; ASW with various unmanned maritime system (UMS) such as USV, UUV based on advanced hydraulic acoustic sensor (Sonar) technology; network; digitalization for the use of AI and big data; and nuclear-powered attack submarines as a strategic deterrent.

Problems of Metallic Dental Instruments for Dental Use (치과에서 사용되는 금속치과기구의 임상적용시 문제)

  • 최한철
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2003.10a
    • /
    • pp.15-15
    • /
    • 2003
  • 치과재료에 사용되는 금속재료는 주로 스테인리스강, 타이타늄, Ni-Ti, Co-Cr등과 같은 특수합금이 주로 사용되고 있다. 이들 재료는 치과 보철물과 교정재료 및 충전재료로 주로 사용되고 있으며 그 외 치과에서 사용되는 기기나 기구에도 많이 활용되고 있다. 특히 치과 보철물을 사용하여 치료를 원하는 환자가 최근에 급격히 증가하면서 임플란트 고정체와 나사 등을 이용한 치료법의 연구와 개발이 필요하게 되어 세계적으로 연구와 투자가 활발히 진행되고 있다. 그러나 재료의 설계나 합금의 설계 및 제품의 설계상의 문제로 인하여 생체조직과 결합하는데 많은 문제점이 임상적으로 발생되고 있다. 즉 임플란트 표면의 생체적합성부여, 고정체와의 결합시 파절이나 풀림현상, 골에 고정체로 사용하는 나사의 강도와 내마모성문제 등이 개선되어야 할 문제점으로 남아있다. 또한 총의치에 사용되는 자석 어태치먼트의erosion-corrosion문제, 교정선의 탄성 과 마모저항문제 등은 앞으로 계속적인 연구를 행하여야할 과제로 남아있다. 또한 국소의치에서 사용되는 frame은 정밀주조법을 통하여 제조하며 주조상의 결함 등으로 인한 클라스프의 파절 문제점이 발생되고 있다. 따라서 본 연구에서는 치과재료로 사용되는 임플란트 고정체, 나사, 교정용 선등의 문제점을 고찰하고, 지금까지 이루어진 연구를 중심으로 최적의 개선 조건을 찾고자하였다. 최근첨단소재 및 금속재료를 사용하여 치과재료 합금을 설계할 수 있는 연구가 활발히 진행된다면 수입에 의존하고 있는 고가의 치과재료를 값이 싼 고성능의 제품으로 대체할 수 있는 효과가 클 것으로 생각된다.>$\rho$$\sub$0/=1.8 %. As t$\sub$Co/ increases, a transition from the regime of co-existence of superparamagnetic and ferromagnetic behaviors to ferromagnetic behavior was observed. Tunneling barrier called "decay length for tunneling" for the films having the thickness of Co layer from 1.4 to 1.6 nm was measured to be ranged from 0.004 to 0.021 ${\AA}$$\^$-1/.문에 기업간 관계를 연구하는 측면에서는 탐험적 연구성격이 강하다. 더 나아가 본 산업의 주된 연구가 질적이고 기업내부만을 연구했던 것에 비교하면 시초적이라고 할 수 있다. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너

  • PDF

Characterization of Physical Factor of Unsaturated Ground Deformation induced by Rainfall (강우를 고려한 불포화 지반변형의 영향인자 평가)

  • Kim, Man-Il;Jeon, Gyo-Cheol
    • The Journal of Engineering Geology
    • /
    • v.18 no.2
    • /
    • pp.127-136
    • /
    • 2008
  • Geophysical survey for establishing a wide site for the distribution of water content, wetting front infiltration due to the rainfall, and distribution of groundwater level has been performed by using 8round penetration radar (GPR) method, electrical resistivity method, and so on. On the other hand, a narrow area survey was performed to use a permittivity method such as time domain reflectometry, frequency domain reflectometry, and amplitude domain reflectometry methods for estimating volumetric water content, soil density, and concentration of contaminant in surface and subsurface. The permittivity methods establish more corrective physical parameters than different found survey technologies mentioned above. In this study for establishment of infiltration behaviors for wetting front in the unsaturated soil caused by an artificial rainfall, soil physical parameters for volumetric water content, pore water pressure, and pore air pressure were measured by FDR measurement device and pore water pressure meter which are installed in the unsaturated weathered granite soil with different depths. Consequently, the authors were proposed to a new establishment method for analyzing the variations of volumetric water content and wetting front infiltration from the responses of infiltrating pore water in the unsaturated soil.

Associations among the health status, behavior, and periodontitis in Korean adults with metabolic syndrome (한국 성인 대사증후군의 건강상태 및 건강행동과 치주염의 관련성)

  • Han, Su-Jin
    • Journal of Korean society of Dental Hygiene
    • /
    • v.20 no.3
    • /
    • pp.313-324
    • /
    • 2020
  • Objectives: The aim of this study was to confirm the association among the health status, health behaviors, and periodontitis according to total, age and sex in cases of adult metabolic syndrome(MetS). Methods: This cross-sectional study used collected data from the 7th Korea National Health and Nutrition Examination Survey (KNHANES) conducted from 2016 to 2018 with 3,394 adults with MetS aged 19-79 years. The complex samples logistic regression analysis confirmed the relevant factors for periodontitis. Results:Periodontitis was diagnosed in 43.6% of all MetS cases. Diabetes (Odds Ratio [OR]=1.554), abdominal obesity (OR=1.336), current smoking (OR=2.465), past smoking (OR=1.379), and not-using oral care products (OR=1.414) were associated with periodontitis in MetS. In the age of 19-39 years with MetS group, diabetes (OR=5.379), elevated blood pressure (OR=3.975), current smoking (OR=7.430), and not using oral care products (OR=3.356) were associated with periodontitis. In the 40-79 age group, diabetes (OR=1.398), abdominal obesity (OR=1.360), current smoking (OR=2.022), and not using oral care products (OR=1.416) were associated with periodontitis. In the male MetS group, current smoking (OR=3.119), past smoking (OR=1.625), and brushing teeth more than three times (OR=0.743) were associated with periodontitis. In the female MetS group, diabetes (OR=1.733), impaired fasting glucose (OR=1.434), abdominal obesity (OR=1.479), and not using oral care products (OR=1.992) were associated with periodontitis. Conclusions: Improvement in blood sugar control, obesity, smoking cessation, and oral health education, including how to use oral care products in all individuals with MetS may result in improved oral health. In addition, improvement in elevated blood pressure in the MetS group aged under 40 years, and brushing teeth more than three times a day in the male MetS group can reduce the risk of periodontitis. Therefore, public and oral health professionals should emphasize on the relationship between age and sex during the metabolic syndrome management program and share relevant information with patients.

Developing a Customized Sexually Transmitted Infections (STIs) Smartphone Application for Adolescents: An Application of the Instructional System Design Model (청소년 성매개 감염병 교육을 위한 스마트폰 어플리케이션 개발과정)

  • Jeong, Soo-Kyung;Cha, Chi-Young
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.2
    • /
    • pp.651-659
    • /
    • 2017
  • Although the need for education on sexually-transmitted-infections (STIs) for adolescents has been increasing, a limited number of adolescents receive STI education. Importantly, the exposure of youth to an STI during their adolescence period can seriously affect their genital health. Smartphones are an innovative medium that can be used to change individual behaviors, especially useful when used to educate adolescents. Therefore, we developed a customized smartphone application for Korean adolescents. The application was based on Dick and Carey's instructional system design model. In this paper, we describe the process for development of the smartphone application, and the strategies we applied to attract adolescents to use the smartphone application. Six experts verified the educational content of the application. The application's easygoing words were chosen to help adolescents understand the topic. Strategies such as cartoon clips, secret chat rooms, buttons changing color from blue to grey, questions and answers, and a repeated-learning function were used to attract Korean adolescents to the application. The smartphone application developed in this study could be used in schools, youth centers, and hospital centers to improve STI knowledge, STI prevention, and STI coping skills.

Study on Controlled Horticulture Farmers' Attitude of Energy-Saving Facilities using the IPA method (시설원예 농가의 에너지 절감시설에 대한 만족도 분석: IPA방법을 이용하여)

  • Kim, Yean-Jung;Han, Hye-Sung;Choi, Chil-Koo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.10
    • /
    • pp.6114-6125
    • /
    • 2014
  • This paper analyzed the issues related to focus on farmers behaviors of energy saving facilities. This study conducted questionnaire and field surveys of controlled horticulture farmers and economic analysis using an IPA(Importance-Performance Analysis) matrix. According to the research results, the performance level was low on average ranging from 2.33 to 2.56 in a five point Likert-scale on greenhouse mandarin and grape-related facilities. On the other hand, the importance levels were high in the mean rating from 2.69 to 4.8. The results show that energy loss reduction of complementary facility and alternative energy supply support for low cost implementation are more important in terms of the respondents concerns than performance quadrant III. Therefore, it is important to provide financial support to energy-saving facilities to promote the use of energy efficiency improvement. In addition, the government should invest continuously in research and development.

A Study on Escape Safety Assessment of High-Rise Office Buildings for Security Plans (경호경비계획을 위한 사무용 고층건축물의 피난안전성평가에 관한 연구)

  • Park, Nam-Kwun;Lee, Young-Ju;Yoon, Myong-O
    • Korean Security Journal
    • /
    • no.28
    • /
    • pp.57-77
    • /
    • 2011
  • Recently, property and life loss is increasing internally and externally, due to fire spread in high-rise buildings which results from a variety of disasters like fire and terror. In this study, therefore, an evacuation simulation was performed to predict escape behaviors of occupants and assess escape safety in high-rise office buildings after setting up each scenario, as part of safety measures for high-rise buildings. Based on the results and data obtained, escape safety was assessed, finally. The results and suggestions of this study are as follows. Firstly, most of the present researches on high-rise building and multiple-use facilities are weighted towards qualitative perspectives. It is, therefore, considered that we have to establish concrete, practical, systematical and rational safety measures to minimize damages in dangerous situations, by analyzing security plans for high-rise buildings in depth and preparing for those situations from various angles. Secondly, setting up evacuation sections in security plans for high-rise buildings is an important factor which influences refuge. Thirdly, in relation to security plans for high-rise buildings, it is possible to reduce the entire time for escape, by setting up escape exits of each floor in consideration of a simultaneous evacuation situation.

  • PDF