• Asian-Australasian Journal of Animal Sciences
• /
• 제30권1호
• /
• pp.34-41
• /
• 2017

Objective: Two experiments were performed to evaluate the effects of coated slow-release urea on nutrient digestion, ruminal fermentation, nitrogen utilization, blood glucose and urea concentration (Exp 1), and average daily gain (ADG; Exp 2) of steers. Methods: Exp 1: Eight ruminally fistulated steers [$503{\pm}28.5kg$ body weight (BW)] were distributed into a d $4{\times}4$ Latin square design and assigned to treatments: control (CON), feed grade urea (U2), polymer-coated slow-release urea A (SRA2), and polymer-coated slow-release urea B (SRB2). Dietary urea sources were set at 20 g/kg DM. Exp 2: 84 steers ($350.5{\pm}26.5kg$ initial BW) were distributed to treatments: CON, FGU at 10 or 20 g/kg diet DM (U1 and U2, respectively), coated SRA2 at 10 or 20 g/kg diet DM (SRA1 and SRA2, respectively), and coated SRB at 10 or 20 g/kg diet DM (SRB1 and SRB2, respectively). Results: Exp 1: Urea treatments (U2+SRA2+SRB2) decreased (7.4%, p = 0.03) the DM intake and increased (11.4%, p<0.01) crude protein digestibility. Coated slow-release urea (SRA2+-SRB2) showed similar nutrient digestibility compwared to feed grade urea (FGU). However, steers fed SRB2 had higher (p = 0.02) DM digestibility compared to those fed SRA2. Urea sources did not affect ruminal fermentation when compared to CON. Although, coated slow-release urea showed lower (p = 0.01) concentration of $NH_3-N$ (-10.4%) and acetate to propionate ratio than U2. Coated slow-release urea showed lower (p = 0.02) urinary N and blood urea concentration compared to FGU. Exp 2: Urea sources decreased (p = 0.01) the ADG in relation to CON. Animals fed urea sources at 10 g/kg DM showed higher (12.33%, p = 0.01) ADG compared to those fed urea at 20 g/kg DM. Conclusion: Feeding urea decreased the nutrient intake without largely affected the nutrient digestibility. In addition, polymer-coated slow-release urea sources decreased ruminal ammonia concentration and increased ruminal propionate production. Urea at 20 g/kg DM, regardless of source, decreased ADG compared both to CON and diets with urea at 10 g/kg DM.

• Korean Journal of Soil Science and Fertilizer
• /
• 제44권5호
• /
• pp.745-751
• /
• 2011

In most agricultural soils, ammonium ($NH_4^+$) from fertilizer is quickly converted to nitrate ($NO_3^-$) by the process of nitrification which is crucial to the efficiency of N fertilizers and their impact on the environment. However, nitrification studies have been studied extensively in agricultural soils, not in a newly reclaimed tidal soil which show saline-sodic and high pH. Therefore, understanding the fate of nitrogen species transformed from urea introduced into reclaimed tidal soil is important for nutrient management and environmental quality. This paper reviewed studies regarding to transformation and fate of nitrogen sources such as urea under the circumstances of a reclaimed tidal soils located in a western coastal area.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제20권4호
• /
• pp.125-132
• /
• 2012

Urea-SCR system, which converts nitrogen oxides to nitrogen and water in the presence of a reducing agent, usually AdBlue urea solution, is known as one of the powerful NOx reduction systems for mobile as well as stationary applications. For its consistent and reliable operation in mobile applications, such various problems as transient injection, ammonia slip, and freezing in cold weather have to be resolved. In this work, therefore, numerical study on three-dimensional unsteady heating problems were analyzed to understand the melting and heat transfer characteristics such as urea liquid volume fraction, temperature profiles and generated natural convection behavior in urea solution by using the commercial software Fluent 6.3. After validating by comparing numerical and experimental data with pure gallium melting phenomena, numerical experiment for urea melting is conducted with three different coolant heating models named CH1, 2, and 3, respectively. Finally, it can be found that the CH3 model, in which more coolant is concentrated on the lower part of the urea tank, has relatively better melting capability than others in terms of urea quantity of $1{\ell}$ for start-up schedule.

• Journal of Power System Engineering
• /
• 제13권4호
• /
• pp.5-10
• /
• 2009

Urea-SCR system, the selective catalytic reduction using urea as reducing agent, is a powerful technique to reduce nitrogen oxides(NOx) emitted from diesel engines. However, a tank of urea(32.5 wt%)-water solution can be frozen in low ambient temperature levels of below $-11^{\circ}C$. The purpose of this study is to understand freezing and melting phenomena of the urea-water solution, and its can be applied to get the urea-water solution from frozen it within 5 minutes after cold start. Factors considered were the type of heater and the urea tank shape. From the results, it was found that melting volume of cartridge heater B during 5 minutes of heating period was 83ml when supplying electric power of 150W. Horizontal heater B, which was put in the narrow bottom space of the tank T1, had fast melting characteristics.

• Journal of the Korean Applied Science and Technology
• /
• 제22권2호
• /
• pp.168-174
• /
• 2005

Aluminum tri-butoxide was mixed with the water/ethanol solution and then chloroplatinic acid was added to the solution. The solution was dried at $100^{\circ}C$ for 15hrs to remove the solvent and water then it was calcined at $500^{\circ}C$. The catalyst was activated with a gas mixture. During the activation, the temperature was increased from $150^{\circ}C$ to $500^{\circ}C$. The necessary amount of urea was dissolved in 50mL water and injected. Aqueous urea solution was then mixed with the feed gas stream. At low temperatures, nitrogen containing compounds of urea decomposition are used as reductants in the reducton of $NO_X$. However at high temperatures the nitrogen containing compounds are oxidized to NO and $NO_2$ by oxygen instead of being used in the reduction. The activity of the catalyst was dependent on urea concentration in the feed stream when there was not adequate water vapor in the feed. The maximum conversion was shifted from $250^{\circ}C$ to $150^{\circ}C$ when water concentration was increased from 2 to 17%. It seems that the maximum temperature shifts to lower temperatures because the hydrolysis rate of HNCO increases with water, resulting in higher amounts of $NH_3$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권3호
• /
• pp.358-363
• /
• 2011

To investigate the effect of nitrogen fertilization on the quality of tropical grass silage, guinea grass grown with 3 types of nitrogen fertilizers, namely, urea, ammonium sulfate, and compound fertilizer 804, at 2 fertilization levels, 0.5 and 2.5 kg $Na^{-1}$ (0.5 N and 2.5 N, respectively), was subjected to silage fermentation. Silage fertilized with 0.5 N showed butyrate-dominant fermentation, irrespective of the type of fertilizer used. On the other hand, fermentation of silage fertilized with 2.5 N was significantly affected by the type of fertilizer used; fertilization with ammonium sulfate and compound fertilizer 804 resulted in silage that contained a large amount of butyrate and no lactate; this silage was considered to be of a significantly low quality as compared with silage fertilized with 0.5 N. Among silage fertilized with 2.5 N, the desirable butyrate-free fermentation was found only in urea-fertilized silage, which had the best quality. Grass material fertilized with a high level of urea accumulated a relatively high concentration of nitrate nitrogen (0.22% dry matter). Our results presented here suggest that nitrogen fertilizer management could affect the quality of tropical grass silage and that a relatively high concentration of nitrate in silage may promote butyrate-free fermentation even in tropical grass silage.

• Asian Journal of Turfgrass Science
• /
• 제11권2호
• /
• pp.97-104
• /
• 1997

The objective of this study was to observe the differences in growth of creeping bentgrass turf to 'polymer coated urea fertilizer' and 'uncoated urea fertilizer', and to analyze durability of fertilizer effect with the 'polymer coated urea'. The experiment was initiated on June 3, 1996, at the Iowa State University Horticulture Research Station, north of Ames, Iowa. The experiment was conducted on an area of 'Penneagle' Creeping bentgrass(Agrostis palustris) maintained at fair-'way mowing height (1.3cm). The study was repeated at the same arrangement beginning on July 25, 1996. Visual quality data, clipping fresh and dry weight, and nitrogen(N) content in the clippings were taken weekly. Quality of the turf increased with increasing N rate. While quality ratings were higher for turf receiving polymer coated urea than for turf receiving uncoated urea at several times following treatment, but not significant. Fresh and dry clipping weights were quite variable during the trial. Visual quality rating and clipping yields improved with increasing rates of N but these differences were not statically significant between polymer coated and uncoated urea treatment. The durability of fertilizer efficiency in polymer coated urea was not last longer compare with uncoated urea from two weeks after treatment. Higher rates of N application increased the concentration of N in tissue but no significant differences between turf plots receiving polymer coated and uncoated urea. Key words: Polymer coated urea, Creeping bentgrass, Fertilizer, Turfgrass.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1725-1733
• /
• 2016

Recent findings have shown that microbial nitrogen flow and digestible energy of diets are increased when urea is combined with a slow-release urea (SRU) in diets with a starch to acid detergent fibre ratio (S:F) 4:1. This affect is attributable to enhanced synchrony between ruminal N availability for microbial growth and carbohydrate degradation. To verify the magnitude of this effects on lamb performance, an experiment was conducted to evaluate the effects of combining urea and a SRU in diets containing S:F ratios of 3:1, 4:1, or 5:1 on performance, dietary energetics and carcass characteristics of finishing lambs. For that, 40 Pelibuey${\times}$Katahdin lambs ($36.65{\pm}3kg$) were assigned to one of five weight groupings in 20 pens (5 repetition/treatments). The S:F ratio in the diet was manipulated by partially replacing the corn grain and dried distiller's grain with solubles by forage (wheat straw) and soybean meal to reach S:F ratios of 3:1, 4:1 or 5:1. An additional treatment of 4:1 S:F ratio with 0.8% urea as the sole source of non-protein nitrogen was used as a reference for comparing the effect of urea combination vs. conventional urea at the same S:F ratio. There were no treatment effects on dry matter intake (DMI). Compared the urea combination vs urea at the same S:F ratio, urea combination increased (p<0.01) average daily gain (ADG, 18.3%), gain for feed (G:F, 9.5%), and apparent energy retention per unit DMI (8.2%). Irrespective of the S:F ratio, the urea combination improved the observed-to-expected dietary ratio and apparent retention per unit DMI was maximal (quadratic effect, $p{\leq}0.03$) at an S:F ratio of 4:1, while the conventional urea treatment did not modify the observed-to-expected net energy ratio nor the apparent retention per unit DMI at 4:1 S:F ratio. Urea combination group tended (3.8%, p = 0.08) to have heavier carcasses with no effects on the rest of carcass characteristics. As S:F ratio increased, ADG, G:F, dietary net energy, carcass weight, dressing percentage and longissimus thoracis (LM) area increased linearly ($p{\leq}0.02$). Combining urea and a slow-release urea product results in positive effects on growth performance and dietary energetics, but the best responses are apparently observed when there is a certain proportion (S:F ratio = 4:1) of starch to acid detergent fibre in the diet.

• Journal of the Korean Applied Science and Technology
• /
• 제35권4호
• /
• pp.1307-1319
• /
• 2018

As interests in the air pollution increases, many kinds of researches are underway on the reduction of air pollutants. The removal of nitrogen oxides from the emission gas of diesel vehicles using urea solution has shown a great effect. The quality of urea solution is strictly defined by domestic law, but the increase of impurities in urea solution reduces the effect of reducing nitrogen oxides. Therefore, in this study, the change of physical properties of urea solution was analyzed after heating the urea solution for a certain temperature and time. Also, the changes of physical properties of urea solution were analyzed according to kinds of storage container and temperature for storing the urea solution. After heating the urea solution for a certain period of time, the biuret content in urea solution increased and the content of urea decreased. As the urea content decreased, both density and refractive index decreased. In the storage stability test carried out at a constant temperature with iron and PET containers, no change in physical properties was observed.

• Journal of Plant Biology
• /
• 제5권3호
• /
• pp.6-10
• /
• 1962

Leaf samples, raised on the N-deficient and N-abundant sand and sprayed with varying concentration of urea, were analized for their total chlorophyll concentration. It was observed that the depression periods of the chlorophyll content appeared at first by spraying with urea; it appeared on the 3rd day in the N-deficient plots and on the 6th day in the N-abundant plots. Causes of the depression of chlorophyll may be assumed to be in an excessive urea, an accumulation of ammonia from urea absorbed, and depression of water content owing to urea application. The maximum content of the chlorophyll was shown on the 6th day in N-deficient and on the 12th day in the N-abundant plots. The young leaves activity formed the chlorophyll by urea foliar spray, compared with the mature ones. This result was consistent with previous paper.