• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.127-139
• /
• 2021

This study investigates business demands for firms operating in the Busan Sasang Industrial Area for the proposed knowledge-industry innovation base. Diverse improvement arrangements are proposed for revitalization of the industrial area. For these purposes, a questionnaire survey was conducted for the examination of physical conditions and enterprise demands among firms. The major findings are as follows. Firstly, judging from the examination of physical conditions, the study area has presented a lower rate of roads and smaller individual lots of land, which would contribute to a worsening business environment for small business owners. Secondly, business request for industrial-area innovation, pilot project needs, and expected impacts demonstrated higher scores. Thirdly, an absolute majority of firms strongly supported the proposed knowledge-industry innovation base and requested an R&D center as the first anchor facility. Based on these findings, guidelines are proposed for an institutional rearrangement plan. First of all, specific field surveys dealing with networking issues and industrial dominance should be immediately carried out. In addition, the proposed knowledge-industry innovation base should be equipped with significant power of influence for the adjacent industrial areas. Lastly, major stakeholders should upgrade the cooperative mechanism for innovative change in the regional industrial complex.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.127-134
• /
• 2012

This study analyzed the present status of services by fire-suppression mobilization time of fire station where is located in Jinju city, by using network analysis of GIS targeting fire station(five 119 safety centers, one 119 division) in Jinju city area. As a result, it was indicated to be 15.9% in the ratio with less than 5 minutes of mobilization time, 34.7% in the ratio with less than 8 minutes, 94% in the ratio with less than 20 minutes out of the whole fire service area in Jinju city. Even districts with more than 20 minutes were analyzed to reach 6%. Especially, to solve vulnerability to approach the fire service in uptown districts(Jinseong, Jisu, Sabong, Ilbanseong, the whole area of Ibanseong), the 119 division is installed more to be operated. However, accessibility is still remaining in low level. Also, in case of 119 safety center of Cheonjeon, the national industrial complex and the general industrial complex are being formed on a large scale. However, analyzing the fire service level in the corresponding area, the districts with more than 8 minutes and less than 20 minutes were existing broadly. In consequence of analyzing the fire service area in Jinju city with the fire-suppression mobilization time as the above, the fire service level is failing to escape largely from the status prior to the urban-rural consolidation compared to what the jurisdictional area was largely expanded by which the administrative districts were integrated by the urban-rural consolidation in locally small-and medium-sized city. Thus, there is a need of a measure for improving this.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3336-3344
• /
• 2014

The purpose of this study is small scale coagulation module is developed and demonstrated through a lab-scale test. Recent as a sewage treatment rate increases, have heightened the interest in the necessity on the nonpoint source and developing a small processing unit has been increased. Coagulation sedimentation module in this study is additional growth of floc through swirling in the outside zone, reduction of microstructure floc number and the internal settling zone through vertical/level flow complex sedimentation method after the coagulation process precipitation method as an effective high separation efficiency can be divided was also assessed. Coagulation sedimentation module can increase the load factor was 4.4 times compared to conventional clarifier base on the same volume and surface area through vertical/level flow. In this study, this process was selected formation and maintenance of swirling and uniform flow distribution in the internal settling zone as an important design factor, to derive its FLUENT was used to characteristics of the flow model. Through the simulation of swirling, influent velocity, dimensions of external basin, hopper depth of bottom cone was determined and through analysis of velocity distribution, flow distribution detailed specifications are derived like as diameter and number of effluent hole. Lab-scale($120{\ell}/hr$) test results, influent of 300~800 NTU to less than 10 NTU without polymer feeding was able to operate in the 20minutes retention time(surface loading rate $37.3m^3/m^2$-day), and through analysis FLUENT the possibility of using design parameters were derived.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2450-2459
• /
• 2014

The purpose of this research is to suggest the direction of basic plan for vitalizing community center street which is stagnant by analyzing current state and results of urban design road in 'Gwangcheonro', a center of Gwangcheon community, and street environment improvement and seeking the measures of improvement. Through the on-the-site inspection and user interview of objective street, the problems were grasped to be narrowly walking road by obstacles, appearance damage by illegal advertisement facility, etc. To vitalize there as a main street for the improvement of walking environment, first is to establish street environment focusing on pedestrians, second is to improve street landscape, third is to design walking-friendly commercial complex and the final is to design street with factors through the relation with regional development factors.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.559-568
• /
• 2011

This study aims at listing up those manufacturing activities sensitive to regional characteristics by analyzing locational hierarchy designed on the urban rank-size rule. This locational hierarchy by manufacturing activities is expected to provide a ground for the proper supply of an industrial complex. The analysis of the locational hierarchy by manufacturing activities can work as a method of observing the characteristics of the distribution of location for each economic activity by analyzing the trend in the change of manufacturing location. Consequently, it can be used to determine the appropriate manufacturing activities for the industrial complex of a particular region. Here, the locational hierarchy is analyzed depending on the base of the basic local government such as Gun(district level) and Si(city level), and manufacturing activities are categorized by Korea Standard Industry Code. Those activities demonstrating growth pattern are Manufacture of Electronic Equipment(KSIC 26), Manufacture of Medical Precision Optical Instruments Watch(KSIC 27), Manufacture of Motor Vehicles (KSIC 30, 31), etc. With proper infrastructures, these activities can be located everywhere. Those sectors on the decline pattern in the locational hierarchy can be summarized as Manufacture of Tobacco Products(KSIC 12), Manufacture of wearing apparel Fur Articles(KSIC 14), etc. Those sectors scattered widely in the locational hierarchy are Manufacture of Food Products(KSIC 10), Manufacture of Coke Petroleum Products(KSIC 19), Manufacture of Chemical Products(KSIC 20), Manufacture of Electronic Equipment(KSIC 26). These particular manufacturing activities can be operated in those regions in a sufficient supply of unskilled workers regardless of proper infrastructures. Those activities that have a tendency to reconcentrate on larger cities are Manufacture of Textiles(KSIC 13), Manufacture of Wearing Apparel Clothing Fur Articles(KSIC 14), Manufacture of Other Transport Equiptmen(KSIC 31). In most cases, these sectors tend to favor their existing agglomerated areas and concentrate around large cities. Therefore, it is inefficient to promote these sectors in small or medium-sized cities or underdeveloped regions. The establishment of developmental strategies of an industrial complex can gain greater competitiveness by observing such characteristics of the locational hierarchy.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.513-520
• /
• 2018

Since Paris Climate Change Conference in 2015, many policies to reduce the emission of greenhouse gas have been accelerating, which are mainly related to renewable energy resources and micro-grid. Presently, the technology development and demonstration projects are mostly focused on diversifying the power resources by adding wind turbine, photo-voltaic and battery storage system in the island-type small micro-grid. It is expected that the large-scaled micro-grid projects based on the regional district and town/complex city, e.g. the block type micro-grid project in Daegu national industrial complex will proceed in the near future. In this case, the economic cost or the carbon emission can be optimized by the efficient operation of energy mix and the appropriate construction of electric and heat supplying facilities such as cogeneration, renewable energy resources, BESS, thermal storage and the existing heat and electricity supplying networks. However, when planning a large residential town or city, the concrete plan of the energy infrastructure has not been established until the construction plan stage and provided by the individual energy suppliers of water, heat, electricity and gas. So, it is difficult to build the efficient energy portfolio considering the characteristics of town or city. This paper introduces an energy mix optimization(EMO) method to determine the optimal capacity of thermal and electric resources which can be applied in the design stage of the real large-scaled residential town or city, and examines the feasibility of the proposed method by applying the real heat and electricity demand data of large-scale residential towns with thousands of households and by comparing the result of HOMER simulation developed by National Renewable Energy Laboratory(NREL).

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.193-202
• /
• 2009

This study was conducted to identify the magnitude of first flush in small city urban area and to provide the basic information on the criteria of stormwater runoff management. Monitoring site was surrounded by residential area in Gumi city near to national industrial complex and the monitoring period was three months. Total watershed area was 24.9 ha, where 80% of the area is impervious (asphalt of pavement type). Periodic monitoring of conventional water quality parameters were conducted with six times of rainfall period. Event mean and site mean concentrations for all the parameters were calculated based on the analytical results. Particle size distribution was 9.82 ${\mu}m$ for $D_{0.1}$, 38.99 ${\mu}m$ for $D_{0.5}$ and 159.61 ${\mu}m$ for $D_{0.9}$ respectively. First flush phenomenon was detected highly in particulate solids than dissolved ones. The first flush criteria results by mass first flush contained between 44.4% to 58.5% pollutant mass during the first 30% of runoff volume. Mass first flush ratio and particle size distribution obtained in this study are expected to provide the basic information for the design and operation of non-point source treatment facility.

• The Korean Journal of Emergency Medical Services
• /
• v.3 no.1
• /
• pp.7-19
• /
• 1999

Background : We are in the edge of some human made disasters such as hazardous materials and air pollution, for example, the world news reported that the city of Bhopal, India had serious victims related with a leaking out of the chemical materials, Methyl Isocyanate and many people in India were killed by. These situations many people who live in this world are world are worrying about are not others, but just ours and people consider about that kind of the disasters are the possible situation to happen to all the people. Therefore, we performed this basic study to recognize the risk of Methyl Isocyanate leak accident and to prepare local disaster plan with EMS system. Method : Trace 8.0, a simulation software made by the U.S. company Safer System was used as a tool to estimate the diffusion distance, area and its victims at the concentrations of 0.02ppm, 0.2ppm 5ppm respectively for an assumed B-city of 2 hundred thousands population count in which was presumed 500kg Methyl Isocyanate gas to leak out. Results : 1. During 1 hour, maximum diffusion distances of 0.02ppm 0.2ppm and 5ppm were 5.41km, 1.61km and 0.29km respectively on the plume impact. 2. Maximum population counts influenced by Methyl Isocyanate gas at the concentrations of 0.02ppm 0.2ppm and 5ppm were 40838, 4346 and 222 on the plume impact, while those were 138238, 17261 and 1588 on the vulnerability impact, respectively. 3. Therefore, 17261 persons must put on respiratory device and 138283 persons must be evacuated to safety place within 1 hour. Conclusions : Only small amount leak of Methyl Isocyanate may cause tremendous chemical disaster in urban area, so its disaster plan must be prepared with an accident simulation program and Material Safety Data Sheets(MSDS). Especially, nearby emergency center of an industrial complex must have a strong position about preparation of chemical disaster plan and perform a disaster dill of hazardous material accident annually.