• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.65-70
• /
• 2008

This study deals with the friction welding of SKH55 and SM45C; The friction time was variable conditions under the conditions of spindle revolution 2,000rpm, friction pressure of 190MPa, upset pressure of 270MPa and upset time of 2.0 seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied, and so the results were as follows. 1. When the friction time is 1.0 seconds, the tensile strength of friction welds was 926MPa, which is around as much as 84% of the tensile strength of base metal(SKH55), the bending strength of friction welds was 1,542MPa, which is around as much as 80% of the bending strength of base metal(SKH55), the shear strength of friction welds was 519MPa, which is around as much as 70% of the shear strength of base metal(SKH55). 2 According to the hardness test, the hardness distribution of the weld interface was formed from 964Hv to 254Hv. HAZ(Heat Affected Zone) was formed from the weld interface to 1.5mm of SKH55 and 2mm of SM45C.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.184-188
• /
• 2002

According to a recent report, Korea first reached aging society in 2000 and it is forecasted that the number of aged people over 65 years old will increase form 7.13%(2000) to 14% or more of total population in Korea in 2022. As many aged peoples are employed as day labor under the financial circumstances after Korean Financial Crisis, it is critical that we should take safety control measures for them. Thus, this study focused on analyzing aged accidents in terms of their characteristics, based on the actual trend of industrial accidents from 1996 to 2001 and the applications of medical treatment for the affected or wounded in Busan metropolitan area for recent 3 years (1999 to 2001) in order to analyze accident characteristics to cope with emergent aging period. As a result of analyzing the above data by job type, it was found that the construction work amounted to 38% of total job type. This result implies that accidents of the aged often occurs in 3D jobs including construction works without reasonable automation, which requires us to establish some preventive policies against those accidents. Moreover, it is found that rapid increasing accidents such as upset or occupational diseases or damages are typically attributed to those in the aged, mainly because the aged employees over 55 years old often have disadvantageous physical conditions such as relatively degraded balance and muscular control ability comparing to the younger. Therefore, it recommended that we should make effective safety policies for the aged and actively apply those policies to them. Moreover, it is required that we should encourage them to actively participate in safety compliance through corresponding trainings.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.106.2-106.2
• /
• 2010

IGCC (Integrated Gasification Combined Cycle) plants are among the most advanced and effective systems for electric energy generation. From a control perspective, IGCC plants represent a significant challenge: complex reactions, highly integrated control to simultaneously satisfy production, controllability, operability and environmental objectives. While all these requirements seem clearly to demand a multivatiable, model predictive approach, not many applications can be easily found in the literature. This paper describes the IGCC dynamic simulation that is capable of simulating plant startup, shutdown, normal, and abnormal operation and engineering studies. This high fidelity dynamic models contain the detailed process design data to produce realistic responses to process operation and upset. And the simulation is used by engineers to evaluate the transient performance and produce graphical information indicating the response of the process under study conditions.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1539-1544
• /
• 1995

Copper blow test to measure the forging capability of 35 ton counterblow hammer and upset of plasticine on the model hammer to investigate the change of the blow efficiency during the forging process have been performed together with finite element analyses of these experiments. The blow efficiency of the hammer has been found to be dependent on the friction and on the contact area between the die and the workpiece. The effects of the volume and the aspect ratio of the billet have not been found. Inferring from the experimental results and Schey's empirical formula on the forging load, we expect that the efficiency also varies with the flow stress of the workpiece material and with the shape complexity of the forging product.

• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.105-111
• /
• 2003

과학위성 1호 탑재 컴퓨터의 인증모델 개발이 완료되었다. 과학위성 1호 탑재 컴퓨터는 우리별 3호에 비하여 FPGA를 사용함으로써 크기 및 무게의 소형화를 추구하였고, 네트워크 제어기를 내장함으로써 고속으로 위성 네트워크에 접속할 수 있도록 하였다. 또한 우주환경에서 직면하게 되는 SEU(Single Event Upset)에 대한 강인성이 증대되었고, 내고장성도 증대되었다. 개발된 탑재 컴퓨터는 환경시험에서 모든 기능이 정상 동작함을 확인하였다.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.32-39
• /
• 2004

Traditional forging of a hollow T-shaped part has been applied to forge a solid T-shaped product from a solid billet and then to machine the hollow in that. In a case, a hollow T-shaped part can be forged by backward-extruding from a solid billet. In this study, four types of forging were suggested for manufacture of hollow T-shaped parts. Forging simulations for each of these forging methods were carried out to investigate folding defect, metal flow pattern, effective strain, and forging loads. Experimental works were carried out to be compared with the simulation results. Here, the ratio of the thickness of the hollow tube to that of the flange was selected to investigate a forging defect like folding.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.138-143
• /
• 1987

Friction welding has emerged as a reliable process for high-production commercial applications with significant economic and technical advantages. But nondestructive test in friction weld was not clearly developed. Therefore the experimental verification is necessary in order to understand the characteristcs of the pulse echo effects according to various change in welding conditions. This paper presents an attempt to determine the relationship between the varios welding conditions and the coefficients of reflection using the ultrasonic pulse echo method in dissibilar metals friction weld. The new approach of calculating the coefficients of reflection based on measured amplitudes of the echoes is applied in this paper. These coefficients provides a single quantitative measurement which involves both acoustic energy reflected at the welded interface as well as transmitted across the interface. As a result, it was known that the quantitave relationship between welding conditions and the coefficients of reflection using the ultrasonic pulse echo exists in dissimilar metals friction weld.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.1036-1042
• /
• 2011

This paper presents an algorithm that conducts automatic memory scrubbing operated by dedicated hardwares. The proposed algorithm is designed so that it can scrub entire memory in a given scrub period, while minimally affecting the execution of flight softwares. The scrub controller is constructed in a form of state machines, which have two execution modes - normal mode and burst mode. The deadline event generator and period tick generator are designed in a separate way to support the behavior of the scrub controller. The proposed controller is implemented in VHDL code to validate its applicability. A simple version of the controller is also applied to mass memory modules used in STSAT-3.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.99-99
• /
• 2003

우리나라 최초의 실용급 지구관측위성인 아리랑 1호는 지난 2003년 2월 21일부로 목표로 하였던 임무운영기간 3년을 완수하였다. 아리랑 1호의 정상 임무운영에 사용되는 탑재체는 전장광학카메라, 해양관측카메라, 그리고 우주과학 탑재체이며, 2001년 8월 원인을 알 수 없는 과전류 발생으로 임무가 중단된 우주과학 탑재체를 .제외한 나머지 탑재체들은 임무 운영기간동안 정상적으로 운영되었다. 전자광학카메라는 한반도를 비롯한 전 세계를 대상으로 지리정보를 위한 영상자료를 획득하는 것이 목적이었으며, 해양관측카메라는 생물학적 해양지도 및 해양환경 관측을 위한 자료를 획득하는 것이다. 우주과학 탑재체는 고에너지 전하입자에 의한 Single Event Upset현상, 우주방사능 관측, 그리고 전자의 온도 및 밀도 측정이 주요 목표였다. 당초 목표했던 임무운영기간을 초과한 현재(2003년 7월 1일 기준)까지 우주과학 탑재체를 제외한 나머지 탑재체들은 정상적으로 운영되고 있다. 본 논문은 아리랑 1호 발사 후 약 3년 6개월간의 기간동안 수행된 탑재체 운영결과들을 정리하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1067-1069
• /
• 2001

자동차 분야에 있어서 자동차 바퀴의 림(rim)용접에서 flash butt 용접이 널리 이용되고 있는 데 이 분야 역시 경량화에 따른 고강도 강재의 채택이 불가피하게 대두되고 있고, 고장력강의 flash butt 용접이 중요한 이슈가 되고 있다. 좋은 용접품질 획득을 위한 균일한 가열을 위해 전류의 시간적 편차가 큰 thyristor에 의한 제어는 큰 flash를 유발할 수 있어서 고장력강과 같은 경우에서 산화물의 발생을 유발시킬 수 있기 때문에 주의하지 않으면 안된다. 따라서 flashing과 upset의 균일성을 획득하기 위해서는 용접전류의 편차가 크지 않도록하는 기술과 최적의 전류를 공급하는 기술, 그리고 용융량과 배출량의 함수적 제어가 중요한 데 이를 위해서 인버터 방식의 전류제어기술이 개발되면 큰 효과를 기대할 수 있다. 본 논문에서는 DSP controller를 이용하여 사이리스터 위상제어를 다이오우드 정류기와 직류 링크 캐패시터, PWM 인버터로 구성해 인버터 방식의 정전류제어 기술을 개발하여 용접성을 비교 실험하여 결과를 보여준다.