• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.2
• /
• pp.365-381
• /
• 2016

This study compared and analyzed current sleeve head products for men and women to develop sleeve head products for aesthetically-designed sleeves. Men and women's sleeve head products, suitable for sleeve caps, were designed and developed based on the results. The study results are as follows. First, men and women's sleeve heads for aesthetic jacket sleeves were designed with sleeve patterns in the background. Sleeve heads and upper sleeves were additionally designed to make 7-layers for men and 4-layers for women. Second, sleeve head patterns were designed so that men's would have a whole length of 48cm, an angle of $30^{\circ}$ and a width of 4.5-7.5cm; in addition, women's would be 40cm, $30^{\circ}$ and 4-5cm. Third, the same materials were used for men's and women's sleeve head products, and the background was made from 1-layer of soft non-woven fabric. As for the sleeve heads, 2-layers and 1-layer of non-fusible interlinings were used for men's and women's, respectively. In order to provide flexibility, the materials were designed in a bias direction. For upper sleeves, 1-layer of non-woven fabric and felt were used for men's, and 1-layer of felt for women's so that an empty space caused by easing contraction can be supplemented.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.641-650
• /
• 2008

In this study, seven models with distinctly different body types were researched and explanatory variables were reviewed. Review was done by using body measurements and the measurements of the appropriate bodice patterns in 1D, 2D, and 3D measurement methods in order to review the pattern making system and the equations for calculating the dimensions of the sleeve caps, which are readily available. Data on human bodies, which can be the criteria for each body part required for the new system for making sleeve cap part, were selected considering conditions such as items with a significantly high contribution rate from the results of regression analysis and the easiness of measurement. As a result of research, an explanatory variable required for the system for making sleeve caps with high general use was extracted. All items with the exception of the waist circumference and upper arm circumference were about the measurement of the form of human bodies, which were newly set in this study. As a result of this study, the equations for calculating the dimensions of each part of the sleeve caps showed distinct differences in comparison to the conventional system of construction.

• Archives of Plastic Surgery
• /
• v.46 no.1
• /
• pp.46-56
• /
• 2019

Background When performing lymphovenous anastomosis, it is sometimes difficult to find venules in the proximity of an ideal lymphatic vessel that have a similar diameter to that of the lymphatic vessel. In this situation, larger venules can be used. Methods The authors evaluated the efficacy of and patient satisfaction with lymphovenous bypass with sleeve-in anastomosis. Between January 2014 and December 2016, we performed this procedure in 18 patients (eight upper extremities and 10 lower extremities) with secondary lymphedema. Lymphovenous bypass with sleeve-in anastomosis was performed under microscopy after injecting indocyanine green dye. The circumferential diameter was measured before lymphovenous bypass and at 1, 2, and 6 months after the procedure. An outcomes survey that included patients' qualitative satisfaction with lymphovenous bypass was conducted at 6 months postoperatively. Results Almost all patients showed quantitative improvements after surgery. The circumferential reduction rate in patients with stage II lymphedema of both the upper and lower extremities was significantly greater than in their counterparts with stage III/IV lymphedema. The circumferential reduction rate was lower in lower-extremity patients than in upper-extremity patients. Conclusions Lymphovenous bypass surgery with sleeve-in anastomosis in lymphedema patients is beneficial, and appears to be effective, when adequately-sized venules cannot be found in the proximity of an ideal lymphatic vessel.

• Journal of Chest Surgery
• /
• v.28 no.10
• /
• pp.911-916
• /
• 1995

Thirteen patients with lung cancer have undergone bronchoplastic procedures from January 1991 to July 1994 in Kyung Hee univ. Hospital.Among them,twelve patients were male and one patient was female from 33 to 76 years of age.[ mean 56.6 11.5 years of age The pathologic diagnoses were squamous cell carcinoma in twelve patients and adenoid cystic carcinoma in one patient.The bronchoplastic procedures consisted of seven right upper sleeve lobectomies, one right middle sleeve lobectomy, one left lower sleeve lobectomy and four sleeve pneumonectomies. In these sleeve pneumonectomies, right sleeve pneumonectomy was done in three patients and the other was left sleeve pneumonectomy. Including the four sleeve pneumonectomies, carinoplasty was performed in seven patients. Postoperatively, we carried out bronchoscopic suction of intrabronchial secretions in necessary for the prevention of postoperative complication. All except one were discharged without any complication and have been in good condition. Postoperative mortality was in one patient who expired 25days after right middle sleeve lobectomy with respiratory failure.

• Journal of the Korean Home Economics Association
• /
• v.24 no.3
• /
• pp.51-58
• /
• 1986

This study is to investigate the Function of sleeve for the construction of cuffs. Three measuremental items of sleeve cap high, length of sleeve and puff quantity of upper sleeve cap are compared between when the experimental man raises righthand static pose. The wearing test is done in sewing cuffs of either fixing up cuffs or not-fixing up cuffs, and in no cuffs. Three measuremental items are pulled length from sleeve end, pulled length from side waist line, and pulled dimensions from waist line. 1. The result according to the length and dimensions variation caused by a change of sleeve cap high. 2. The results according to the length and dimensions variation caused by a sort of sleeve length. 3. The results according to the length and dimension variation caused by the puff quantity of sleeve cap.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.63-77
• /
• 1992

The purpose of this study is to improve clothing construction by analyzing form variation of upper trunk & upper arms with the use of plaster cast. Experimental research was performed by plaster gypsum method. The subjects were males between age 21 and 25, classified Standard somatotype by their bust size and Rorher Index. Arm movements were consisted of 5 types(0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 135$^{\circ}$, 180$^{\circ}$) to each vertical motion in front. The statistical analyses used in this study were mean, standard deviation, repeated mesure design. The result obtained from this study were as follows; 1. As a result of investigating into the rate of the expantion and contraction of basic body-surfact-lines, the side seam length showed the maxium rate of expantion in 180$^{\circ}$ degrees, the shoulder length showed the maxium contraction in the same degrees. 2. The variation of the upper part of the body form by increasing the upper limb motions, shoulder point was moved to be the inside or upside. And the anterior armfit point, posterior armfit point and armfit point were moved to upside. The form of the armhole-line in Drafts of a body surface was differently changed by increasing the movements. 3. Increasing the upper limb motions, the height of sleeve cap decresed and width of the sleeve decreased but girths of the sleeve cap was not show consistant change.

• Journal of Fashion Business
• /
• v.16 no.3
• /
• pp.78-94
• /
• 2012

This study devised and drew custom sleeve patterns by using a regression equation with the data from 7 models along with the sleeve that was slightly modified to make the general-purpose sleeve pattern. To devise a general-purpose sleeve pattern, the sleeve pattern was drawn as an object for comparison by applying the Bunka drafting system (sleeve pattern by the Bunka drafting system) to the basic upper garment. Actual sleeves, made by using the three types of patterns above, were created and tested by models. Next, 30 panel members participated in a sight test of the compatibility of the sleeves to examine the validity of the sleeve drafting method acquired using the regression equation. The test proved that the custom sleeve pattern and the general-purpose sleeve pattern were more suitable for the characteristics of arm structures. Thus, the new sleeve-cap part drafting method using the regression equation was shown to have validity. As a result, since a very significant correlation was obtained for the body measurement figures and the basic pattern of the adequate basic pattern of the sleeves, this study concludes that it is possible to come up with primary data that can be widely used by increasing the number of subjects.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.53-62
• /
• 2004

A single layer latticed dome is one of the most efficient structures because of its low specivic gravity. For easily analyzing of a single layer latticed dome, joint system is assumed to be pin or rigid joint. However, its joint uses ball whose system has intermediate properties of pin and rigid joint. Therefore this study has a grasp of bending rigidity, stress and mechanical properties through experimental and analyzing method of the bolt inserted ball joint. To analyze the stress of bolt and sleeve, this study uses through 3D elastic contact and cubic element, and then the ball and the bolt are perfectly connected for easily analyzing Compared experimental results to F.E.M, each specimen has an error of less than 12 percent. In the results of stress distribution through F.E.M, stress occurs from bottom of bolt to top of sleeve, and most of tension appears on the bolt, also compression occurs from upper parts of the bolt to the sleeve. The assumption of bending stiffness in ball joint is well known that bolt resists only tension and upper sleeve resiss compression. The results of experiment and analysis have $7{\sim}56%$ error, assuring that upper part of bolt occurs of partial compression. In the result of modified assumption have $4{\sim}20%$ error.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.73-88
• /
• 1997

In old Korea from the 4th century of 6th cen-tury the lapels of You and upper garment folded slightly. It had tight sleeves and its length was not long reaching to the hips. but from the 7th century the sleeve of You became wider and its length became longer, Chinese You folded very deeply across the breast and its sleeve was tight. The length of Chinese You was short too strectching out to the hips. From the 5th century the sleeve of the Chinese You became wider Chinese trousers with wide crotch appeared in the 4th century during the time when Ezst Jin Dyn-asty ruled China. The upper garments with the wide sleeve was common by the 7th century in China. What is specially noteworthy is that Short-dalnyung appeared in the 5th ∼6th century. In old Korea strings were used to tie the bottoms of the trousers. Trousers with tight crotch did not need the strins. korean trousers with wide lines were narrower than the Chinese trousers at the bottom and it was not necessary to use the strings for people to put them on In China there were both of wide trousers and tight trousers. People tied trousers around the kness with the strings in the formal places but they did not tied the trousers with the strings when they wore the ordinary clothes. Chinese trousers were very wide just like a skirt and they were much wider than wide Korean trousers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.508-513
• /
• 1996

The purpose of this paper, having chosen the connection method, filled by High-strength mortar, in conncetion of PC member, is to study the mechanical behaviour and practical usage of the method. The paper estimates the connection ability of Reinforced-bar, that is, Sleeve considering the effect of Reinforced-bar's dimeter. Sleeve's length and diameter in the structural behaviour of mortar-filled connection, therefore the behaviour of Splice-Sleeve exists in concrete practically. This paper discusses the effect of the concrete in Splice-Sleeve. Also, to estimate structural behaviour in a practical wall panel, the upper and bottom wall panels are produced and the behaviour of Splice-Sleeve is discussed. And then Vertical Tie Bar being designed by using Precast method, this paper presents the various application and the practicable method using Splice-Sleeve.