• 제목/요약/키워드: upper-limb

검색결과 646건 처리시간 0.034초

견비통(肩臂痛) 치료(治療) 혈위(穴位)에 있어 Kim Sham Acupuncture를 이용한 단일 맹검에 관한 임상실험(臨床實驗) (The Study of the Kim Sham Acupuncture for Single Blind about the Acupuncture Points used for Treatment of the Shoulder Pain.)

  • 이성용;임정아;나원민;이충식;김대중;김성철
    • Journal of Acupuncture Research
    • /
    • 제23권6호
    • /
    • pp.133-143
    • /
    • 2006
  • Objectives : To Investigate Severity Measurement and the Correlation between Acupoints on the Face and the Upper limb in Bell's Palsy Patients by Using of DITI. Methods : We recreated the persons in the Wonkwang oriental hospital, KwangJu and the public health center, Hwasoon from April 2005 to October 2005. the 60 persons randomized allocated were not showed the acupuncture and treated in the acupuncture points used for treatment of the shoulder pain. the 30 persons were treated with real acupuncture and the others were treated with Kiln Sham Acupuncture. Conclusion : This report suggest that we must except Kyon-lyo(TE14), kyon-u(LI15), and hu-gye(SI03) from the shoulder pain study with Kim Sham Acupuncture because the persons significantly distinguished Real acupuncture from Sham acupuncture at the Kyon-lyo(TE14), kyon-u(LI15) and hu-gye(SI03) and so We cannot blind a person.

  • PDF

Development of Fruit Harvest Basket and Assessment of its Effectiveness

  • Lim, Cheol Min;Chae, Hye Seon;Seo, Min Tae;Lee, Kyung Suk;Kim, Hyo Cher;Kim, Kyung Ran;Kim, Sung Woo
    • 대한인간공학회지
    • /
    • 제33권5호
    • /
    • pp.313-321
    • /
    • 2014
  • Objective: The purpose of this study is to develop products that prevent muscular skeletal disease of farm workers, which would bring improvement for an efficient harvesting work. Background: A pretest for product development and a survey research was carried out to inspect the problems of current harvesting work procedure. The product was developed and assessed based on ideas to supplement and improve these weak points. Method: A total of twenty men were recruited to evaluate the effects of harvest baskets on the upper-limb muscle activity, working hours. For the usability evaluation, electromyogram and working hours of previous working method (disuse of harvest basket, one-hand carriage of the basket) and new working method with the usage of newly-developed harvest basket was examined. The whole anterior deltoid, biceps brachii and erector spinae on both sides, which make a total of six muscle parts, were used for this experiment. The results were analyzed using ANOVA with muscle activity (%MVC) of each three forms of work and required work time from SPSS 18.0. Results: According to the test result, all muscles did not demonstrate any statistically significant difference, with an exception of the backbone erector (right). The muscle activity of backbone erector (right) in the work method that uses the harvest basket developed in this study was detected to be approximately 23% less than that of the previous working method. Moreover, compared to the previous working method, the required work time decreased to a statistically significant degree. Conclusion: As such, the decrease in the amount of waist muscle usage at harvesting work would enable the prevention of muscular skeletal disease and stabilization of lumbar spine. Application: Which in turn would increase the effectiveness and reduce personnel expense (labor costs) while enhancing productivity with a decreased working hours.

Fast Dimming Associated with a Coronal Jet Seen in Multi-Wavelength and Stereoscopic Observations

  • 이경선;;문용재;;이진이
    • 천문학회보
    • /
    • 제37권1호
    • /
    • pp.89.1-89.1
    • /
    • 2012
  • We have investigated a coronal jet observed near the limb on 2010 June 27 by the Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), and Solar Optical Telescope (SOT), and the SDO/Atmospheric Imaging Assembly (AIA), Helioseismic and Magnetic Imager (HMI), and on the disk by STEREO-A/EUVI. From EUV (AIA and EIS) and soft X-ray (XRT) images we have identified both cool and hot jets. There was a small loop eruption in Ca II images of the SOT before the jet eruption. Using high temporal and multi wavelength AIA images, we found that the hot jet preceded its associated cool jet by about 2 minutes. The cool jet showed helical-like structures during the rising period. According to the spectroscopic analysis, the jet's emission changed from blue to red shift with time, implying helical motions in the jet. The STEREO observation, which enabled us to observe the jet projected against the disk, showed that there was a dim loop associated with the jet. We have measured a propagation speed of ~800 km/s for the dimming front. This is comparable to the Alfven speed in the loop computed from a magnetic field extrapolation of the HMI photospheric field measured 5 days earlier and the loop densities obtained from EIS Fe XIV line ratios. We interpret the dimming as indicating the presence of Alfvenic waves initiated by reconnection in the upper chromosphere.

  • PDF

상지 외골격 로봇 제어를 위한 인체 팔 동작의 기구학 및 동역학적 분석 - 파트 1: 시스템 모델 및 기구학적 제한 (Analysis on Kinematics and Dynamics of Human Arm Movement Toward Upper Limb Exoskeleton Robot Control Part 1: System Model and Kinematic Constraint)

  • 김현철;이춘영
    • 제어로봇시스템학회논문지
    • /
    • 제18권12호
    • /
    • pp.1106-1114
    • /
    • 2012
  • To achieve synchronized motion between a wearable robot and a human user, the redundancy must be resolved in the same manner by both systems. According to the seven DOF (Degrees of Freedom) human arm model composed of the shoulder, elbow, and wrist joints, positioning and orientating the wrist in space is a task requiring only six DOFs. Due to this redundancy, a given task can be completed by multiple arm configurations, and thus there exists no unique mathematical solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and their effect on the redundancy resolution of the human arm based on a seven DOF manipulator model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing different cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid for the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each two consecutive points along the task space trajectory. As a first step, the redundancy based on the kinematic criterion will be thoroughly studied based on the motion capture data analysis. Experimental results indicate that by using the proposed redundancy resolution criterion in the kinematic level, error between the predicted and the actual swivel angle acquired from the motor control system is less than five degrees.

모션인식 디바이스를 이용한 수부재활치료 시스템 (Hand Rehabilitation System Using a Hand Motion Recognition Device)

  • 황제승;김민진;문미경
    • 한국컴퓨터정보학회논문지
    • /
    • 제19권8호
    • /
    • pp.129-137
    • /
    • 2014
  • 수부와 상지 질환을 가지고 있는 환자가 질환 회복을 위해서 재활치료를 받게 된다. 재활치료는 신체 기능을 회복, 유지시키기 위해 환자의 활동에 대해 중재를 시행하고 물리적 자극을 이용하여 치료하는 것으로, 이는 반복하여 꾸준히 시행하는 것이 가장 중요하다. 본 논문에서는 손상 받은 수부의 기능을 향상시키고 회복시키기 위해 능동적인 활동으로 치료를 제공할 수 있는 수부재활 시스템의 개발 내용에 대해 기술한다. 이 시스템은 손의 움직임을 포착 추적하는데 특화된 디바이스인 립모션을 활용하여 환자 스스로 따라할 수 있는 6 가지 수부재활 운동 패턴을 제공한다. 이를 통해 환자가 일상생활에서 지속적으로 재활운동을 수행하도록 함으로써 치료의 성과를 향상시키도록 한다.

자동차 산업에서의 OCRA Checklist와 RULA 평가 비교 (Comparison of assessment by OCRA Checklist and RULA at an auto Manufacturing Plant)

  • 이관석;정민수;전성재;천영지;김재형
    • 대한인간공학회지
    • /
    • 제26권4호
    • /
    • pp.153-160
    • /
    • 2007
  • Due to the high occurrence rate of musculoskeletal disorders(MSDs), many Korean companies adopted various assessment tools to evaluate workers' musculoskeletal stress. Using the results of this evaluation, tasks were selected for improvements. However, there are still many workers who complained of musculoskeletal stress of their tasks. Their tasks usually consist of repetitive activities and a short rest cycle. This prompts a concern of reliability of the evaluation tools and especially RULA. Thus in this study, OCRA(The Occupational Repetitive Action tool) was used to check whether RULA(Rapid Upper Limb Assessment) evaluates workers' musculoskeletal stress reasonably well since OCRA has been known to be a good evaluation tool for repetitive tasks and tasks with short recovery periods. The evaluation was conducted on 142 tasks. It was found that 65 tasks showed higher action levels by OCRA than by RULA. However, 13 tasks showed the reversed result and 64 tasks showed the same level regardless of the evaluation tool. It was concluded that either RULA or OCRA alone cannot evaluate all types of tasks very well. It is suggested that OCRA needs to be used with RULA together for the evaluations of musculoskeletal stress at workplaces where repetitive activities and short recovery periods exist.

산후풍 환자의 적외선 체열 영상 특성에 대한 연구 (A Study on Digital Infrared Thermographic Imaging Characters of Women Suffering from Postpartum Disease)

  • 박경선;이윤재;황덕상;이진무;이창훈;조정훈;장준복;이경섭
    • 대한한방부인과학회지
    • /
    • 제23권2호
    • /
    • pp.116-123
    • /
    • 2010
  • Purpose: During Postpartum period many women complain multiple pain, cold hypersensitivity, hot flush, sweating and so on. We call the postpartum disease as San Hu Pung. We studied DITI Characters of women suffering from Postpartum disease. Methods: We studied 74 postpartum women visiting OOhospital from February 2006 to December 2009. The subjects were categorized in two groups, symptom group and no symptom group. We measured the temperatures of abdomen, upper and lower limb and back. We studied the difference of DITI between two groups by Student T-test using SPSS for windows(version 17.0). Results: The general characteristics were not different statistically. Temperatures of abdomen and back of two groups were not different statistically. Temperatures of both LR3 of symptom group were statistically higher than no symptom group. The difference of both PC8 and LU4, both LR3 and ST32 of symptom group were statistically higher than no symptom group. Conclusion: The results suggest that women suffering from Postpartum disease shows high temperatures on hand and foot. It seems that postpartum disease patients tend to have blood deficiency. DITI can be useful to diagnose San Hu Pung. More studies to diagnose San Hu Pung would be needed.

Usefulness of V-Y Advancement Flap for Defects after Skin Tumor Excision

  • Kwon, Ki Hyun;Lee, Dong Gwan;Koo, Su Han;Jo, Myoung Soo;Shin, Heakyeong;Seul, Jung Hyun
    • Archives of Plastic Surgery
    • /
    • 제39권6호
    • /
    • pp.619-625
    • /
    • 2012
  • Background After skin tumor excision on the face, extremities, or trunk, the choice of treatment for a skin defect is highly variable. Many surgeons prefer to use a local flap rather than a skin graft or free flap for small- or moderately-sized circular defects. We have used unilateral or bilateral V-Y advancement flaps, especially on the face. Here we evaluated the functional and aesthetic results of this technique. Methods All of the patients were pathologically diagnosed with squamous cell carcinoma (SCC), basal cell carcinoma (BCC), or malignant melanoma or premalignant lesion (Bowen's disease). Thirty-two patients underwent V-Y advancement flap repair (11 unilateral and 21 bilateral) from January 2007 to June 2011. We analyzed the patients' age and satisfaction, and location and size of defect. The patients were followed up for 6 months or more. Results There were 22 women and 10 men. The ages ranged from 47 to 93 years with a mean age of 66 years. The causes were SCC in 15 cases, BCC in 13 cases, malignant melanoma in 1 case, Bowen's disease in 2 cases, and another cause in 1 case. The tumor locations were the face in 28 patients, and the scalp, upper limb, and flank each in one patient. All of the flaps survived and the aesthetic results were good. Postoperative recovery was usually rapid, and no complication or tumor recurrence was observed. Conclusions The V-Y advancement flap is often used not only for facial circular defects but also for defects of the trunk and extremities. Its advantages are less scarring and superior aesthetic results as compared with other local flap methods, because of less scarification of adjacent tissue and because it is an easy surgical technique.

제조업의 생산직 근로자의 상지 근골격계 증상에 영향을 미치는 요인 (Factors Affecting Musculoskeletal Symptoms of Manufacturing Workers)

  • 김규상;홍창우;이동경;정병용
    • 한국산업보건학회지
    • /
    • 제19권4호
    • /
    • pp.390-402
    • /
    • 2009
  • This study aimed to examine the general characteristics of individual workers, psychosocial working environment, and ergonomic risk factors which affect the status of musculoskeletal disorders. Self-report was carried out for musculoskeletal symptoms and ergonomic risks in working environment in 856 production workers in 16 small to medium sized manufacturing companies. Musculoskeletal symptoms were examined with a standardized questionnaire, and ergonomic risks were evaluated with a qualitative self-administered instrument for the tasks related to musculoskeletal disorders. Major findings were as follows: 1) Complaint rate for musculoskeletal symptoms was higher in female, aged, married workers with longer working hours, less leisure/hobby activity, longer household working hours and history of disease or accident. 2) Complaint rate for musculoskeletal symptoms was significantly higher in workers with dissatisfaction, difficult tasks, and no self-control at work. 3) Complaint rate for musculoskeletal symptoms was significantly higher in workers involved in tasks with major ergonomic risk factors, and handling heavy equipment. 4) Explanatory power increased the model with the musculoskeletal symptoms as dependent variable and demographic variables, psychosocial working environment and ergonomic risk factors included, and total explanatory power of 18.6% revealed the significant effect. Based on the results, we can conclude that musculoskeletal symptoms in manufacturing workers are associated with individual demographic characteristics, psychosocial working environment and ergonomic risk factors.

뇌졸중 환자의 장애 특성에 따른 접촉 감각 자극이 두점 구별, 손 기능 및 일상생활수행력에 미치는 효과 (The Effect of Tactile Stimulation on Two Point Discrimination, Hand Function, and ADL in Impaired Characteristics of Stroke Patient)

  • 송보경
    • 대한물리의학회지
    • /
    • 제7권4호
    • /
    • pp.481-491
    • /
    • 2012
  • PURPOSE: This study find out the effect of improved two point discrimination (TPD), hand function and activities of daily living (ADL) performance through tactile stimulus of upper limb (U/L) in impaired characteristics of stroke METHODS: We selected 26 stroke patients in BMH who has problems with neglect, sensory and motor deficits. Patients were divided into 3 group with neglect group (NG), sensorimotor deficits group (SMG) and motor deficit group (MG). To compare each group we used assessment tools such as two point discrimination on affected side (TPDas) and unaffected side (TPDus), Manual functional test on affected side (MFTas) and unaffected side (MFTus) and Korean version modified barthel index (K-MBI). RESULTS: 1) In the NG, tactile stimulus on U/L was statistically important for TPDas (forearm, index finger tip) also SMG and MDG was statistically important for TPDas. 2) In the NG, SMG, there was statistically important for MFTas, MFTus and in the MG. K-MBI also was statistically importance. Among three group, there was an statistically important difference for TPTus (forearm, thenar, hypothenar), MFTas and MFTus. We analyzed the relationship among TPD, MFT and K-MBI and There was negative relationship between TPD, MFT and There was positive relationship between TPD and K-MBI CONCLUSION: In impaired characteristics of stroke patients, tactile stimulus on U/L influenced on two point discrimination, hand function and ADL's. And we also found relationship among somatosensory, hand function, and ADL performance.