• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.1-15
• /
• 2004

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing/ Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis and ANOVA. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting height and upper chest circumference for upper garments and height and waist for lower garments. 2. Analyzing the correlations according to the three-fold classifications of height/upper chest circumference/waist for garment specifications, 17 specifications based on heights and upper chest circumferences for Beijing men's upper garments could be designed within the deviation level of 2%, while 15 specifications based on waist measurements could be designed (between $70{\sim}98cm$) for their lower garments within the deviation level of 4%. Thus, a total of 60 combinations of the specifications could be obtained. 3. 16 specifications based on heights and upper chest circumferences for Shanghai men's upper garments could be designed within the deviation level of 2%, while 16 specifications based on waist measurements could be designed (between $68{\sim}98cm$) for their lower garments within the deviation level of 3%. Thus, a total of 56 combinations of the specifications could be obtained. For other reference measurements, grading measures were set for each type and body part, while the average measures of major body parts were calculated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• International Journal of Costume and Fashion
• /
• v.5 no.1
• /
• pp.1-13
• /
• 2005

Two hundreds of female aged 19 years old and up were recruited to evaluate the postural changes and bilateral variation of asymmetry over age. To find out the differences among the age group, subjects were classified into 5 groups, early young age(19-29), late young age(30-39), early middle age(40-49), late middle age(50-59), and old age(60-). 35 body measurements were taken by the 3-D body scanner which allowed us to take measurements which cannot be measured using traditional methods, including the shape of a cross section, slice area surface are, and volume. Bilateral variations were observed as a function of age; Depth of scapular point level, scapular point to center back, and blade angle. Postural change of anterior cervical angle, upper anterior thoracic angle, upper posterior thoracic angle, posterior cervical angle, and center back/center front ratio were also exhibited. In each measurements, subjects were classified into normal, and abnormal group. Percentiles of abnormal in shoulder line angle, blade angle, neck point $\∼$ acromial point $\∼$ scapular point, posterior cervical angle, and upper posterior thoracic angle were increased over age group. The upper body of lateral view was classified into 3 types of posture based on the previous research; straight, erect(leaning back), and stooped(bent forward). The percentiles of subjects who have straight postures were decreased as a function of age, but those of stooped postures were increased. Subjects who have erect postures did not so. The stooped posture group shows the big cervical fossa angle, anterior cervical angle, posterior cervical angle, upper posterior thoracic angle, and the small upper anterior thoracic angle comparing to the straight and erect posture group. These results could be apply for clothing construction reflecting the changes in back, shoulder, neck, and the bilateral asymmetry according to the target age group.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.115-123
• /
• 2015

It is commonly known that upper class house in Chosun Dynasty has characteristics of connecting space in combination with 'Chae' and 'Madang'. But living territory of traditional residence is connected each other by means of the necessity of dwelling life. So, it can be a fragmentary understanding about traditional houses to consider it as connecting space only from the viewpoint of visual perception. Residential space in later Chosun Dynasty is affected by practical life-style rather than building principle of 'Confucianism' due to the erosion of the caste system and the spread of the modern residential culture. So, it is necessary to consider dwelling life at that time in order to understand spatial characteristics of the residences. Researcher made an assumption that these characteristics were observed in the emerging upper class houses which appear in the process of change of the caste system rather than the traditional upper class houses. The researcher investigated connecting space from 'Bakat-ma-dang' to An-ma-dang of the emerging upper class houses in Gyong-gi province. The goal of this study is to find the properties of connecting space related to dwelling life of the emerging upper class houses in Gyong-gi Province. With this study, the followings are the characteristics of connecting space in emerging upper class houses in later Chosun Dynasty. First, 'An-ma-dang(Courtyard)' comes into close contact with 'Bakat-chae(Outer quarters)' which accommodate the complex functions, 'An-ma-dang' plays an mediating role between 'An-chae' and 'Bakat-chae' Second, 'Bakat-chae' generally encases 'An-ma-dang' which is central territories of dwelling life, and the men's area of 'Bakat-chae' considerably has opening space towards the outside. Third, 'Anmadang' plays an mediating role of male's and female's living territory, and it plays an important role in connecting space where labor forces are concentrated.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.1
• /
• pp.133-140
• /
• 2016

PURPOSE: This study's aim was to investigate the effects of an action observational training in subactue stroke patients with moderate impairment. METHODS: 22 participants (men=13, women=9) with hemiparesis were randomly assigned to action observation training group or task-oriented training group. Patients in both group underwent a patient-specific multidisciplinary rehabilitation program. Participants in the action observation group (mean age, $62.78{\pm}9.85$) were asked to watch the video scene, in the knowledge that they would then attempt to perform the same movement task after watching. The control group (mean age, $61.49{\pm}8.64$) practiced the same tasks, without watching the video. To evaluate upper limb function, the upper extremity part of the Fugl-Meyer Assessment upper extremity and the Box and Block Test were used. The modified Barthel index was used to assess ADLs, and the modified Ashworth scale were used to assess spasticity in the upper extremity. RESULTS: The action observational training group exhibited greater changes in the Fugl-Meyer assessment upper extremity (P<0.05; 95% CI, 0.929 - 6.403), the Box and Block test (P<0.05; 95% CI, 0.086 - 5.913), and the modified Barthel index (P<0.01; 95% CI, 2.483 - 12.627) between groups. And the modified Ashworth scale (P>0.05; 95% CI, -0.402 to 0.624) did not show significantly different between groups. CONCLUSION: These findings suggest that action observational training may be more helpful to improve upper-extremity function than physical training only in subactue patients with moderate impairment after stroke.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.322-326
• /
• 2011

Etch process of silicon dioxide layer by using capacitively coupled plasma (CCP) is currently being used to manufacture semiconductor devices with nano-scale feature size below 50 nm. In typical CCP plasma etcher system, plasmas are generated by applying the RF power on upper electrode and ion bombardment energy is controlled by applying RF power to the bottom electrode with the Si wafer. In this case, however, etch results often drift due to heating of the electrode during etching process. Therefore, controlling the temperature of the upper electrode is required to obtain improvement of etch repeatability. In this work, we report repeatability improvement during the silicon dioxide etching under extreme process conditions with very high RF power and close gap between upper and bottom electrodes. Under this severe etch condition, it is difficult to obtain reproducible oxide etch results due to drifts in etch rate, critical dimension, profile, and selectivity caused by unexpected problems in the upper electrode. It was found that reproducible etch results of silicon dioxide layer could be obtained by controlling temperature of the upper electrode. Methods of controlling the upper electrode and the correlation with etch repeatability will be discussed in detail.

• Wind and Structures
• /
• v.26 no.4
• /
• pp.215-229
• /
• 2018

The appearance of a rivulet at the upper surface of a stay cable is responsible for rain-wind-induced vibration (RWIV) of cables of cable-stayed bridges. However, the formation mechanism of the upper rivulet and its aerodynamic effects on the stay cable has not been fully understood. Large eddy simulation (LES) method is used to investigate flow around and aerodynamics of a circular cylinder with an upper rivulet at a Reynolds number of 140,000. Results show that the mean lift coefficients of the circular cylinder experience three distinct stages, zero-lift stage, positive-lift stage and negative-lift stage as the rivulet located at various positions. Both pressure-induced and friction-induced aerodynamic forces on the upper rivulet are helpful for its appearance on the upside of the stay cable. The friction-induced aerodynamic forces, which have not been considered in the previous theoretical models, may not be neglected in modeling the RWIV. In positive-lift stage, the shear layer separated from the upper rivulet can reattach on the surface of the cylinder and form separation bubbles, which result in a high non-zero mean lift of the cylinder and potentially induces the occurrence of RWIV. The separation bubbles are intrinsically unsteady flow phenomena. A serial of small eddies first appears in the laminar shear layer separated from the upper rivulet, which then coalesces and reattaches on the side surface of the cylinder and eventually sheds into the wake.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.4
• /
• pp.7-16
• /
• 1991

This research investigated soil, plants, insects and birds in the Mongchon Earth Fort, establishing the 11 plots, according to planting treatment, in order to present management method for ecological stability of species in the ground covering plots. The results of analysizing the investigated data summarize as follows. 1. In the ground covering plots without upper layer, the density and coverage of middle and low layer in the natural plots were higher than those in the artificial plots. 2. In the ground covering plots without upper layer, the density and coverage of low layer were higher than those in the artificial, while the density and coverage of herb layer in the natural plots were lower. 3. Whether there was upper layer or not, the total species diversity and enenness of the ground covering community in the natural plot without artificial treatment and natural treatment plot were higher than those ground covering. 4. In the ground covering plots with upper layer, the species diversity of ground covering in the plots without artificial treatment is high, while the species diversity in the plots with natural treatment caused the secondary succession is higher than that of the natural plot. 5. In the ground covering plots without upper layer, the species diversity in the plots with artificial management was higher than that of natural plots, while the evenness in the plots with artificial management was lower. 6. In the ground covering plots with upper layer the species diversity of insect in the plot of natural state was higher than that of insect in the plots with artifical treatment. 7. Synthetically, in the area with upper layer the species diversity of the ground covering community in the natural plot was high, while in the area without upper layer, the species diversity of it in the plots with artificial treatment was high. The insect turned up frequently in the plots of high species diversity of the ground covering, so the bird did in the plots of high species diversity of the ground covering and insects.

• Journal of radiological science and technology
• /
• v.22 no.2
• /
• pp.61-68
• /
• 1999

The purpose of this study is to present controversial point and reform measurements by analysing factors haying important effect on selection of upper gastrointestinal study in total health promotion. We examined 200 persons for this study, who visited for upper gastrointestinal study from January to February in 1999. We classified this group into Endoscopy, Upper gastrointestinal series, and sleeping endoscopy. We also investigated standard of satisfaction and factors having effect on selection of each study. As a results, in the motive of selection, Item of 'making accurate observation' and 'without pain' was 39.3% and 34.7%, respectively. In this study, sleeping endoscopy was 45.7%, but on the other side upper gastrointestinal series was low 22.6%(P<0.05). In the standard of preference of study, the man was 55.7% in the endoscopy, and the woman was 61.8% in the upper gastrointestinal series(P<0.05). The standard of preference of upper gastrointestinal series show that it was satisfied on the whole irrespective of sex, dwelling place, age, occupation, and level of education. In the selection of study, one's own will was showed the highest frequency, and family inducement was showed second(P<0.05). Persons over 60% were examined before the same study. Selection of upper gastrointestinal series was 47.9% of person with normal findings, and endoscopy and sleeping endoscopy was over 70% with gastritis, gastric and duodenal(P<0.01). For one's accurate selection of examination, it is important that objective and credible information should be given to a recipient for examination.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.3
• /
• pp.311-320
• /
• 2010

This study aimed to examine the development and characteristics of the workers with upper limb musculoskeletal symptoms and disorders and to analyze the upper limb musculoskeletal symptoms and disorders for its relationship with the individual socio-demographic characteristics. This study investigated the effect on the limitations of physical activities using standardized surveillance tool and clinical diagnosis. Musculoskeletal symptoms and the limitations of physical activities were examined. The clinical diagnosis of musculoskeletal disorders were carried out by physical examination, radiological examination and electromyography-electroneuronography for 22 workers in kitchen hood assembly process and 50 workers in toggle process of leather product manufacturing. The proportion of workers with musculoskeletal disorders was higher and the DASH score was also statistically higher in female and aged workers with longer working hours, longer household working hours, less leisure/hobby activity and higher physical load. Physical activities component score increased in the following order: workers in normal health, workers with musculoskeletal symptoms, and workers with musculoskeletal disorders as clinically diagnosed. Score for each DASH component increased in the following order: sports/performing arts ability, social activities, specific physical functional activities, work or other regular daily activities, work ability, psychological activities, insomnia and upper limb symptoms. The overall and each component DASH scores were higher in workers with symptoms of status praesens and of more severity, and receiving medical intervention. Musculoskeletal symptoms and disorders are associated with individual socio-demographic characteristics, and DASH score for physical activities of upper limb was higher in workers with musculoskeletal disorders. Musculoskeletal symptoms and disorders have a remarkable epidemiological significance for physical activities, social activities, work or other regular daily activities, upper limb symptoms and insomnia, where work ability, sports/performing arts ability and preventive measure is needed.