Journal of the Korean Data and Information Science Society
/
v.26
no.4
/
pp.857-864
/
2015
By Wikipedia, data mining is the computational process of discovering patterns in huge data sets involving methods at the intersection of association rule, decision tree, clustering, artificial intelligence, machine learning. Clustering or cluster analysis is the task of grouping a set of objects in such a way that objects in the same group are more similar to each other than to those in other groups. The similarity measures being used in the clustering may be classified into various types depending on the characteristics of data. In this paper, we computed bounds for similarity measures based on the probabilistic interestingness measure with partially marginal probability such as Peirce I, Peirce II, Cole I, Cole II, Loevinger, Park I, and Park II measure. We confirmed the absolute value of Loevinger measure wasthe upper limit of the absolute value of any other existing measures. Ordering of other measures is determined by the size of concurrence proportion, non-simultaneous occurrence proportion, and mismatch proportion.
Objective: Musculoskeletal neck pain have many symptoms which include decreased range of motion (ROM) and muscle strength, and increased pain. However, the management methods are controversial. The purpose of this study was to examine the effects of three interventions on ROM, strength, and pressure pain threshold (PPT) with musculoskeletal neck pain. Design: Pretest-posttest design. Methods: Thirty subjects participated in this experiment. They were randomly assigned to thefollowing groups: passive stretching (PS) group (n=10), massage (MASS) group (n=10), and muscle energy technique (MET) group (n=10). The treatment were applied bilaterally on the upper trapezius. The PS was applied 3 times for 30 seconds each time. The MASS was applied using two different techniques for 2 minutes per technique. For MET, the subjects performed 2 sets of 3 repetitions of isometric resistance exercise that was maintained for 10 seconds, followed by 10 seconds of rest. ROM, strength, and PPT parameters were measured after intervention. Results: In the MASS group, there was a significant improvement in all outcomes except for muscle strength (p<0.05). In the MET group, ROM and strength significantly improved compared to the pre-treatment results (p<0.05). As result of measuring the amount of change in each group, there was a significant difference in ROM (flexion) in the PS group compared with the MASS and MET group, a significant difference in strength in the MET group compared with the PS and MASS groups, and a significant difference in PPT in the MASS groups compared with the PS and MET groups (p<0.05). Conclusions: This study showed that PS, MASS, and MET are effective methods for improving ROM, strength, and PPT for musculoskeletal neck pain. Therefore, various therapeutic interventions for improving ROM, strength, and pain are suggested.
Journal of the Korea Fashion and Costume Design Association
/
v.11
no.2
/
pp.1-10
/
2009
The purpose of this study is to investigate harmonious color schemes based on a length proportion of upper and lower parts of a body by; understanding of the harmonious length proportion of a square measure of a color in color coordination of fashion design, and presenting a mutual relation of the length proportion of a square measure of a color according to the various way of color schemes and proportions. For this study, monochromatic scheme, analogous scheme and complementary scheme were adapted as the color schemes, and each color scheme was coordinated by analogous tone and contrast tone. Also, 1:1 symmetry proportion, 1:2 harmonic proportion, 1:1.618 golden section, 1:3 and 1:5 contrast proportion were used as the square measure of a color. For the survey, 12 sets of color sample were organized. The survey was conducted 182 of university students majored in fashion design, and 143 responded samples were analyzed using SPSS 12. The result of the study is as follows: 1:5 contrast proportion is most inharmonious in general, and 1:1 symmetry proportion is followed. It is thought that too much or same length of the square measure of colors has less attractive effect of coloring. On the other hand, 1:1.618 golden section and 1:2 harmonic proportion are accepted to be harmonious in all color schemes. The length proportion of the square measure of a color had more influence on harmony of color coordination in fashion design rather than color schemes. Though, on the assumption that people have a similar perception about the color image of fashion design, it will play an important role in strengthening or diminution of color in cloth if the coloring effect of the length proportion of the square measure of a color is used in fashion design and wearing of clothes.
This study reports a research which was conducted on how frequently and where the students use the unit circle method while dealing with trigonometric functions in solving the trigonometry questions. Moreover, the reasons behind the choice of the methods, which could be the unit circle method, the ratio method, or the use of trigonometric identities, are also investigated to get an insight about their understanding. In this study, the relationship between the students' choices of methods in solving questions is examined in terms of instrumental or relational understanding. This is a multi-method research which involves a range of research strategies. The research techniques used in this study are test, verbal protocol (think aloud), and interview. The test has been applied to ten tenth grade students of a public school to get students' solution processes on the paper. Later on, verbal protocol has been performed with three students of these ten who were of the upper, middle and lower sets in terms of their performance in the test. The aim was to get much deeper data on the students' thinking and reasoning. Finally, interview questions have been asked both these three students and other three from the initial ten students to question the reasons behind their answers to the trigonometry questions. Findings in general suggest that students voluntarily choose to learn instrumentally whose reasons include teachers' and students' preference for the easier option and the anxiety resulting from the external exam pressure.
Purpose: Cryptotia is a congenital deformity in which the upper third of the auricle is buried under the temporal skin. It is rare in Caucasians, yet it is more common in Asians. Although a variety of methods to treat cryptotia have been introduced, there is still no acceptable single procedure that can successfully manage this deformity in its entity. We present a triangular V-Y advancement flap and rhomboid flap for correcting cryptotia that can overcome the diverse shortcomings of the conventional methods. Methods: This operative method was used to correct 18 auricles in patients ranging in age from 4 to 33 years. A triangular flap was prepared over the auricle by making a skin incision according to Ohmori's method. Then a rhomboid flap with a side length of about 8 to 10 mm that sets the lower portion as a pedicle in the anterior region was prepared to supplement the contracted portion of the helix. The cartilage deformity was corrected by the banner flap or the radiating cartilage incisions with cartilage graft or high density polyethylene graft. Results: We have treated 16 patients with severe cryptotia using this method and have obtained good aesthetic results. All cases showed widened scaphoid fossa and smooth triangular fossa of antihelix. There were no major postoperative complications, such as necrosis or infection of the flaps. Conclusion: Correction of cryptotia using the triangular V-Y advancement flap and rhomboid flap is useful a method for certain conditions, when a severe contraction of the helix is present.
Purpose: The purpose of this study was to compare modified sling exercise and general isometric exercise in patients with shoulder impingement syndrome. Methods: Twenty subjects were studied. The control group, n1 = 10, received instructions for doing general isometric (ISO) exercise. An experimental group, n2 = 10, received instructions for doing push-ups from standing and sitting positions and modified scapular exercises using a sling (3 sets, 3 times per week for 6 weeks). To evaluate the effects of exercise, subjects were evaluated using a visual analog scale for pain, a goniometer for range of motion, and electromyography for onset time of muscle contraction. Statistical analysis was done using the Wilcoxon Signed rank and Mann-Whitney U tests. Results: Pain in the sling group was significantly decreased after 6 weeks of treatment (p<0.05) pain in the general ISO exercise group was not significantly decreased (p>0.05). Flexion and external rotation were significantly increased after 6 weeks of treatment in both groups (p<0.05) and the change in the Sling group was greater than in the ISO group (p<0.05) in the flexion test. Time of onset of contractions in the Sling group for the upper trapezius, lower trapezius and serratus muscle were significantly decreased after 6 weeks of treatment (p<0.05), but the onset time for the middle trapezius did not significantly decrease (p>0.05). Conclusion: Scapular stabilizing exercise using a sling increases range of motion and decreases pain, and onset time of muscle contraction in patients with impingement syndrome.
The Transactions of the Korean Institute of Electrical Engineers P
/
v.58
no.3
/
pp.357-361
/
2009
This study performed analysis on the thermal pattern and current characteristics of an LED ((Light Emitting Diode) street lamp. It did this using a TVS (Thermal Video System) to analyze the LED street lamp's thermal pattern, and measured its characteristics using an oscilloscope. The ambient temperature and humidity during the experiment were maintained at $24{\pm}2[^{\circ}C]$ and 50~60[%]. The capacity of the LED street lamp was 120[W] and nine sets of modules were arranged at uniform intervals. On one module, 24 LED lamps were arranged in a radial pattern. The analysis of the thermal diffusion pattern at the front of the LED lamp showed that the maximum surface temperature was approximately $34[^{\circ}C]$. In addition, there was almost no change in the temperature of the upper cover, and the temperature at the side showed a uniform thermal diffusion pattern. The surface temperature of the converter converting AC to DC increased to approximately $46[^{\circ}C]$. The analysis results of the thermal characteristics of one LED indicated uniform thermal characteristics for an initial eight minutes. However, the temperature at the center of the LED increased to approximately $82[^{\circ}C]$ after 12 minutes had elapsed. It can be seen from this that the temperature at the center of the LED was higher than the allowable temperature, $70[^{\circ}C]$ of the insulating material for general electrical devices. Therefore, it is necessary to design a lamp in such a way that the plastic insulating material does not come into contact with or get close to the LED lamp. The voltage of the LED lamp converted by the AC/DC converter was measured at DC 27[V] and the current was DC 13[A]. Consequently, it can be seen that in order to secure an adequate light source, it is important to supply a stable current that was greater than the current of other light sources. Therefore, appropriate radiation of heat is required to secure the stability and reliability of the system.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.42
no.1
/
pp.1-9
/
2014
The present study was conducted by using fast-responding PSP technique to measure the surface pressure on a small-scale rotor blade in hover. Also, the study was performed to verify the accuracy and investigate its possibility of PSP application for rotor blade pressure measurement. Pulsed laser which has 532 nm wavelength was used as a light source. Lifetime measurement technique was applied. Also, the coated paint on a rotor blade was porous PSP which has faster response time than conventional PSP. The blades had NACA0012 airfoils. The length of rotor blade was 340 mm and chord was 40 mm with rectangular shape 1 set, and 4 sets had several tip sweepback angles. The measured results qualitatively showed that the upper surface pressure decreases with increasing the collective pitch angle. Quantitative pressure coefficients of PSP results were higher approximately 0.4 to 0.7 than the pressure tap data of the NASA experiment.
As the corner of wooden pagoda forms the roof by closely bordering left and right eaves on the various purlins and angle rafters, it is designed for every face to be recognized as front whose structure system increases load to bear proportionally. The corner of wooden pagoda is inseparable with the corner bracket set as it becomes stable thanks to the corner bracket set structurally and load burden under restrained structure makes the corner bracket set really important. Accordingly, this study could figure out some facts by analyzing corner bracket sets of Palsangjeon of Beobjusa Temple in Korea, Seokgatap of Bulgungsa Temple in China and Ojungtap of Beobryungsa Temple in Japan which were constructed with pure wooden structure. This study demonstrated that corner bracket set played a pivotal role in keeping balance of concentrated load of corner (corner of opening) in each floor that contributed to the stability of wooden pagoda structurally despite multiple duplications of floors and also figured out the outfit of corner bracket set was subject to the floor type and the cross section of Gongpo installed on top of Pyeongju. Wooden pagodas in 3 countries were two floor types of octagon and square, and employed different connection method between upper and lower floors. The difference between floor and duplication method determines the method of corner, but even different methods were sufficient to have entirety in every side by completing dynamic principle of corner bracket set even though old method had to solve the problem of concentrated load and it also confirms that it was essential Gongpo to prevent any deformation of corner.
This study sets up nodal regions for shopping and leisure with 424 district units located in Seoul and examines the characteristics of the vertical structure and the regional system. According to the higher-order analysis result, the trip for leisure forms a greater part, and about each of the nodal regions of the first stratum, major spots for origin and destination are located in the center, and those spots are connected to adjacent district units located nearby. As the factor's eigenvalue is bigger, the spatial range gets greater, too, and is located in outsides. And in the third or higher strata, either linkage between Gangnam and Gangbuk or leapfrogging linkage according to the bipolar factors is distinctive. Linkage between nodal regions centering around Jongro-gu, Jung-gu, Gangnam-gu, or Yeoungdeungpo-gu is not distinct, and in particular, the nodal regions of Jongro Geumcheon are maintained as the upper strata being independent from other nodal regions from the second or higher strata.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.