• Journal of Korean Society of Environmental Engineers
• /
• 제29권1호
• /
• pp.47-53
• /
• 2007

The aim of this study is to research applicable possibility or Dry Sorbent Injection Technique(DSI) in sox removal process using Computational Fluid Dynamics(CFD) software package. It will be applied for 500MW in capacity coal-fired thermal power plant operated by South Korea N. Power Co., Ltd. The DSI process is adapted between a preheater and an EP process in the technological assembly. The numerical analysis performs in predicting and optimizing of DSI process's characteristics, which consists of structure of duct, position of injection nozzles, injection speed, and dispersion of sorbent. Computing results are shown that degree of sorbent dispersion depends on structure of duct and position of injection nozzles strongly. The highest dispersion efficiency was obtained when we set a Lobed-plate inside the duct and 6 injection nozzles on the duct(4 injection nozzles at the corners and 2 injection nozzles on upper and under walls as a rectangle duct shape). We also know that change of injection speed of sorbent doesn't have an large effect on the sorbent dispersion but it can effect to drop pressure.

• The Journal of the Korea Contents Association
• /
• 제9권1호
• /
• pp.400-406
• /
• 2009

In this study, in order to find the movement of polluted substance that is flown into the river and the characteristics of dispersion, the experiment that used the RI (Radioactive Isotope) tracer in the river was undertaken, and by using the experiment result, the figure modelling was undertaken to analyze the general type of pollutant dispersion. In addition, in order to calculate more accurate dispersion range and moving time, the experiment was done in about 2km from the measuring points of Namdae Stream around the Yongdam Dam of the upper Geum River to the lower stream. In order to find out the flow of river and dispersion of polluted substance, RMA (Resource Modeling Associates)-2 and RMA-4 program are used in study. The site experiment using the RI was implemented for the experiment in the applied area and the same area, and the distance between each zone was set for 1km with the slight difference for site situation and measured the density date of one second distance through the NaI apparatus to measure the density data of one second interval. On the basis of this measured data, it is compared and analyzed with the result of figure copy of the models to make the comparison and analysis of density distribution following the change in expansion coefficient that makes great influence on expansion range and dispersion in natural rivers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제19권5호
• /
• pp.1259-1268
• /
• 2015

The sonic layer depth (SLD) variability is important for understanding the acoustic properties of the upper ocean that influence acoustic communications, acoustic tomography, and naval operations related to searching and detecting marine underwater vessels. Generally, the SLD is the acoustical equivalent of the mixed layer depth (MLD), although they are defined differently. In this study the SLD was compared with the MLD over the annual cycle in the East Sea using an available set of temperature-salinity observation profiles. For the comparison, various definitions and methods of the MLD had applied. As a result, the SLD in the East Sea is slight similar to the curvature method applied MLD, but the other MLD have severe differences with the SLD. Futhermore, a parabolic equation transmission model is used to evaluate the cutoff frequency trapped in surface duct. It follow that there is an optimum frequency for propagation at which the loss of sound is minimum.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.567-568
• /
• 2018

In recent years, there have been frequent occurrences of collapsing buildings and tilting accidents due to frequent earthquakes and aging of buildings. Various methods have been proposed to prevent disasters on these buildings. In this paper, we propose a system algorithm that provides an indication of anomalous phenomena such as collapse and tilting of buildings by real - time monitoring of IoT (Internet of Things) - based architectural anomalies. The multi-advanced sensor is based on the Inclinometer sensor and the Accelerometer sensor, transmits the detected data to the server in real time, accumulates the data, and provides the service to cope when the set threshold value is different. It is possible to evacuate and repair the collapse and tilting of the building by warning the occurrence of the upper threshold event event such as the collapse and tilting of the building.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.145-149
• /
• 2009

High-resolution atmospheric numerical system was set up to simulate the motion of the atmosphere and to produce the wind map on land. The results of several simulations were improved compare to the past system, because of using the fine geographical data, such as terrain height and land-use data, and the meteorological data assimilation. To estimate surface maximum wind speed when a typhoon is expected to strike the Korea peninsula, wind information at the upper level atmosphere was applied. Using 700hPa data, wind speed at the height of 300m was estimated, and surface wind speed was estimated finally considering surface roughness length. This study used formula from other countries and estimated RMW but RMW estimation formula apt to Korea should be developed for future.

• Safety and Health at Work
• /
• 제7권3호
• /
• pp.218-224
• /
• 2016

Background: Butchering is often associated with high rates of work-related musculoskeletal disorders (WRMSDs). However, published work on the prevalence of WRMSDs among butchers in Nigeria is scarce. This is important because meat processing practices differ across geographical and cultural locations. This study was therefore aimed at analyzing WRMSDs among butchers in Kano metropolis. Methods: Sociodemographic and work-settings information was obtained from 102 male cattle butchers (age, $37.49{\pm}11.68years$) through survey. Information on the prevalence and pattern of musculoskeletal disorders was obtained from the respondents using the Standardized Nordic Questionnaire. Additional information on health seeking practices was also obtained using a pro forma. Associations between the prevalence of WRMSDs and each of the sociodemographic data and work settings were explored using Chi-square analysis. The level of significance was set at p < 0.05. Results: The 12-month and point prevalence rates of WRMSDs among butchers in this study were 88.2% and 74.5%, respectively. Whereas lower back complaints (66.7%) were the overall and lower body quadrant's most commonly reported WRMSDs among the butchers surveyed, wrist/hand complaints were the leading upper quadrant's (45.1%) most commonly reported WRMSDs among the respondents. There were significant associations between age and majority of WRMSDs in the body regions. Only 23.3% of the 90 individuals who had WRMSD visited the hospital to seek redress for their WRMSD. Conclusion: The prevalence of WRMSDs is high among butchers in Kano Metropolis. Few individuals with WRMSD utilize healthcare facilities. Age is a major risk factor in this setting.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제42권1호
• /
• pp.1-9
• /
• 2014

The present study was conducted by using fast-responding PSP technique to measure the surface pressure on a small-scale rotor blade in hover. Also, the study was performed to verify the accuracy and investigate its possibility of PSP application for rotor blade pressure measurement. Pulsed laser which has 532 nm wavelength was used as a light source. Lifetime measurement technique was applied. Also, the coated paint on a rotor blade was porous PSP which has faster response time than conventional PSP. The blades had NACA0012 airfoils. The length of rotor blade was 340 mm and chord was 40 mm with rectangular shape 1 set, and 4 sets had several tip sweepback angles. The measured results qualitatively showed that the upper surface pressure decreases with increasing the collective pitch angle. Quantitative pressure coefficients of PSP results were higher approximately 0.4 to 0.7 than the pressure tap data of the NASA experiment.

• Journal of the Ergonomics Society of Korea
• /
• 제35권1호
• /
• pp.1-10
• /
• 2016

Objective: This study aimed to find good design for summer functional farm shoes under the agricultural environment and working characteristics, which can help safe farm work and further promote the efficiency of working. Background: Most accidents at farms were overturn accidents caused by slipping or falling, and it was found that the main factors which caused the overturn accidents were inappropriate work shoes for the working conditions. These inappropriate work shoes often cause overturn accidents in the rural areas with steep paths. Method: A survey on work shoes was conducted with 174 farmers, and the outcome of this survey was used to find problems of work shoes and improvement ideas for the design of work shoes which can be used at farms. Results: Regarding the form of farm shoes, the ankle height was set at 6 inches to prevent the bending of the ankle and the inflow of foreign substances. The size and groove of the pattern of the outsole were extended to prevent catching of foreign substances. In the upper part, polyurethane and cordura were used in combination to secure air permeability, which was pointed out as the reason for the discomfort during the work wearing existing work shoes. Conclusion: Since farmers felt discomfort with the shoes which they were currently wearing, this study suggested a design of farm shoes by analyzing the important matters of the work shoes in development in order to improve such discomfort. Application: This study can help develop farm shoes that would practically ease farmers' burden of working at farm worksites and keep them safe.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권3호
• /
• pp.123-129
• /
• 2014

Objectives: The aim of this study was to verify the concordance of the measurement values when the same cephalometric analysis method was used for two-dimensional (2D) cephalometric radiography and three-dimensional computed tomography (3D CT), and to identify which 3D Frankfort horizontal (FH) plane was the most concordant with FH plane used for cephalometric radiography. Materials and Methods: Reference horizontal plane was FH plane. Palatal angle and occlusal plane angle was evaluated with FH plane. Gonial angle (GA), palatal angle, upper occlusal plane angle (UOPA), mandibular plane angle (MPA), U1 to occlusal plane angle, U1 to FH plane angle, SNA and SNB were obtained on 2D cephalmetries and reconstructed 3D CT. The values measured eight angles in 2D lateral cephalometry and reconstructed 3D CT were evaluated by intraclass correlation coefficiency (ICC). It also was evaluated to identify 3D FH plane with high degree of concordance to 2D one by studying which one in four FH planes shows the highest degree of concordance with 2D FH plane. Results: ICCs of MPA (0.752), UOPA (0.745), SNA (0.798) and SNB (0.869) were high. On the other hand, ICCs of gonial angle (0.583), palatal angle (0.287), U1 to occlusal plane (0.404), U1 to FH plane (0.617) were low respectively. Additionally GA and MPA acquired from 2D were bigger than those on 3D in all 20 patients included in this study. Concordance between one UOPA from 2D and four UOPAs from 3D CT were evaluated by ICC values. Results showed no significant difference among four FH planes defined on 3D CT. Conclusion: FH plane that can be set on 3D CT does not have difference in concordance from FH plane on lateral cephalometry. However, it is desirable to define FH plane on 3D CT with two orbitales and one porion considering the reproduction of orbitale itself.

• The International Journal of Costume Culture
• /
• 제3권1호
• /
• pp.1-11
• /
• 2000

The purpose of this study is to compare the constitutions comparatively among Korean, Chinese and Chosunjok college women and thereby, provide for some basic data helpful to the development of export apparels befitting the Chinese consumers, For this purpose, Korean, Chinese and Chosunjok college women aged between 17 and 24 were sampled to be subject to body measurements. The measurement data obtained were indexed for each part of the body to set a total 29 constitutional indices, which were analyzed by factor dictating the major shapes of body, Thus, based on the constructed, the differences of constitution among three groups were comparatively analyzed. The results of this study of this study can be summarized as follows; It was found through this study that Korean college women had thickest neck compared with body size and had longer lower limbs compared with stature, Moreover, their lower body was absolutely longer than the other two groups, and thus, Korean college women were found slimmest. On the other hand, Chinese college women had most voluminous chest turned over with shorter and thicker body. they were obesest. Chosunjok college women had longest upper body but shortest breast length. Their lower body was obesest, and their body was longer compared with stature. Moreover, Chosunjok college women's lower limbs were shortest, while their arm scyes were small nearest body type.