• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.346-346
• /
• 2017

In Northern Laos, maize is cultivated in continuous cropping without fertilizer, fallowing nor any other soil conservation practice. It is expected that this inadequate management in maize cultivation will degrade soil and decrease yield. However, there is limited information about the change of soil condition and yield under continuous maize cultivation. We tried to evaluate the change of soil condition and yield under continuous maize cultivation in Northern Laos. Our study was conducted in farmer's flat and slope fields in Sainyabuli province where maize cultivation had been introduced earlier than the other provinces of Northern Laos. Our study was conducted in 21 fields in 2014, and in 19 fields in 2015. We analyzed grain yield and soil characteristic (total carbon (TC), total nitrogen (TN), available phosphorus (Av-P), exchangeable cation, pH, soil texture) at 3 places in each field. The 3 places were set at different elevation level (lower position, middle position, upper position) in slope fields. Further, the period of continuous maize cultivation and crop management practice were investigated. Then, by evaluating the relation between the period of continuous maize cultivation and yield and the soil characteristics, the effect of maize cultivation was estimated. Crop management practices were similar among the investigated fields. Maize was cultivated in rain season. Grain seed and cob were harvested on September or October, but shoot was left on the fields. No crop was cultivated during dry season. Fertilization and fallowing has never been conducted under continuous maize cultivation. On the other hand, the period of maize cultivation was different among the fields, and ranged from 2 years to 30 years. In the slope fields, as the period of continuous maize cultivation was longer, the contents of TC and TN were lower at all 3 positions, Av-P content was lower at the upper position, exchangeable potassium (Ex-K) content was lower at the middle and the upper positions. The other soil characteristics weren't related with the period of maize cultivation in the slope fields. In contrast, soil characteristics weren't related with the period of maize cultivation in the flat fields. Yield was lower as the period of maize cultivation was longer at the upper position of the slope fields. At middle position of slope fields, yield tended to be low with increase of the period of maize cultivation. In contrast, yield wasn't related with the period of continuous maize cultivation in flat fields. From the results about crop management, it was presumed that the period of maize cultivation was one of the main factors causing the difference of yield and soil characteristics among the fields. Therefore, from the result of yield and soil condition, it was considered that the continuous maize cultivation decreased soil productivity in the slope fields with decline of TC, TN, Av-P, Ex-K and yield at upper position of slope fields, and decline of TC and TN in the other positions in Sainyabuli province.

• 치위생과학회지
• /
• 제4권1호
• /
• pp.21-25
• /
• 2004

현대사회에서는 생활환경의 변화와 교통사고의 증가에 의해 해마다 소아의 외상의 증가하고 있는데 구강조직에 대한 외상성 손상을 완전히 치단하는 데에는 한계가 있어 외상성 치아손상에 관한 실태를 조사 분석함으로써 외상처치와 예방에 필요한 기초자료를 제시하고자 강릉대학교 치과병원 소아치과에 2000년 10월 4일부터 2004년 2월 27일까지 외상을 주소로 내원한 113명의 환자를 대상으로 조사 분석한 결과 다음과 같은 결론을 얻었다. 1. 연구대상자의 성별에서는 2.05:1의 비율로 남자의 경우가 외상빈도가 더 높게 나타났다. 평균 연령은 남자 5.27세, 여자 5.27세로 차이가 없었고, 전체 연령중 2세에서 외상환자가 제일 많았다(21.2%) 2. 외상부위별 내원기간을 조사한 결과 유치는 당일(34.4%)에 내원한 경우가 가장 많았고, 영구치는 1일 후(38.8%)에 내원한 경우가 가장 많았다. 3. 외상부위별 치아손상의 원인을 분석한 결과 넘어진 경우가 유치 59.4%, 영구치 55.1%, 물체에 부딪친 경우 유치 26.6%, 영구치 26.5%로 나타나 대부분 넘어지거나 부딪쳐서 외상이 발생한 것으로 나타났다. 4. 성별에 따른 치아손상이 발생한 장소는 가정인 경우가 남자 42.1%, 여자 35.1%로 남녀모두 가정에서 외상이 가장 많이 발생하였다. 외상부위에 따른 치아손상 발생한 장소로는 유치는 가정(59.4%)에서 가장 많이 발생하였고, 영구치는 유치원 및 학교(28.6%)에서 가장 많이 발생하였다. 5. 외상부위에 따라 치아손상을 받은 치아의 수를 분석한 결과 유치는 2개(56.3%), 1개(31.3%), 3개와 4개 이상 각각(6.3%), 순으로 나타났으며, 영구치는 2개(46.9%), 1개(28.6%) 4개 이상(16.3%), 3개(8.2%) 순으로 영구치인 경우 4개 이상인 경우도 비교적 높게 나타났다. 6. 성별에 따른 치아손상이 발생한 부위로는 남자 유치 56.6%, 영구치 43.4%, 여자 유치 56.8%, 영구치 43.2%로 남녀 모두 유치에서 외상이 가장 많이 발생하였다. 7. 유치와 영구치의 치아손상부위는 상악 전치부가 거의 대부분을 차지하고, 유치(75%)와 영구치(63.8%) 모두 상악 중절치에서 외상율이 높게 나타났다. 8. 전체적인 외상성 치아손상에 따른 외상종류의 조사결과는 동요 30.2%, 치관파절 28.0%, 함입 14.7%, 진탕 8.9%, 완전 탈구 7.1%, 정출 2.2%, 변위 1.8% 순으로 나타났다. 유치와 영구치별로 외상성 치아손상의 종류를 분류하였을 때 유치는 동요(35.8%)가 가장 많이 나타났고, 파절에서 치관파절은 영구치(44.8%)에서 많이 발생하였다. 9. 외상부위에 따른 외상성 치아손상처치는 처치없이 경과관찰을 한 경우가 유치는 43.2%, 영구치 38.9%로 나타났으며, 치료한 경우 유치는 치수절제술(22.0%), 영구치는 임시적산부식레진수복(19.5%)을 가장 많이 사용하였다.

• 인터넷정보학회논문지
• /
• 제1권2호
• /
• pp.11-18
• /
• 2000

본 논문은 실시간 트랜잭션 시스템(Real-Time Transaction System)에 하위 트랜잭션(subtransaction) 개념을 도입한 새로운 확장모델을 제시하였다. 제안된 모델은 J. Moss 모델을 실시간 단일 프로세스에 특정한 시간제약을 부과함으로 확장되었으며, 이를 기반으로 통합된 동시성 제어와 스케줄링 알고리즘이 개발되었다. 이는 Sha의 우선 순위 제한 알고리즘에 기반하여 확장된 알고리즘으로, 실시간 트랙잭션의 시간제약을 보장함과 동시에 데이터베이스의 일관성도 함께 유지한다. 본 논문은 제안된 실시간 중첩 트랜잭션 모델이 무한정한 블록킹(blocking)과 데드락(dead lock)을 방지함과 동시에 실시간 트랜잭션의 직렬화도 유지함을 증명하였으며, 또한 트랜잭션의 상위 바운드를 설정하고, 고정 우선순위 기반 방법(Rate-Monotonic Priority Assignment)을 적용함으로 스케줄링 가능성을 분석하였다. 본 연구는 다중 및 분산 실시간 중첩 트랜잭션 모델로 확장하기 위한 첫 단계이며, 또한 최근 관심을 모으는 웹기반 실시간 멀티미디어 데이터베이스 모델로 확장이 가능한 것으로 추정된다.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.111-119
• /
• 2020

Objective: The purpose of this study is to apply exercise learning effect to various subjects through training effect and information accumulation based on verification of the effect on dumbbell curl exercises applied with virtual reality. Method: To analyze the effect on the dumbbell curl exercise in the virtual environment, a total of 20 persons with 10 males and 10 females who does not have orthopedics diseases were selected. The dumbbell weight of the subjects was set to a weight of 70% strength of 1RM. At this time, the virtual environment situation was set to four types; presence/absence of virtual environment, preferred colors, and unfavorable colors to perform dumbbell curl exercise. The anaysis of muscle activity was conducted by adhering four surface electrodes (Biceps Brachii, Triceps Brachii, Brachioradialis Muscle, Extensor Carpi Radialis Longus Muscle) on the right upper limbs. Independent sample t-test using SPSS (24.0) program was carried out to analyze average values and standard deviations for each variable depending on the presence/absence of virtual environments and changes in color (preferred colors, unfavorable colors) and the level of significance was set to a=.05. Results: In the eccentric contraction, males showed high muscle activity in the Biceps Brachii under virtual reality. On the other hand, females had high muscle activity in the Biceps Brachii in the absence of virtual reality. Also, in case of a change of colors in the virtual environment, females had the high muscle activity in the unfavorable color in the eccentric contraction. Conclusion: During the dumbbell curl exercise, results of different exercises present depending on gender. When males put VR on and performs a basic dumbbell curl exercise, the effect of Biceps presents Brachii for them while exercising in unfavorable colors. However, since it is the basic research data of muscle exercise using virtual reality, it is necessary to verify whether or not it is effective for myopachynsis through long-term training rather than unity.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권4호
• /
• pp.351-361
• /
• 1997

This study was performed to evaluate the change of the soft tissue facial profile after mandibular set back surgery during time intervals. For this study, 33 patient, 8 males and 25 females, were selected and their lateral cephalograms were taken and analyzed periodically. Hard and soft tissue changes during postoperative time intervals, correlation between surgical skeletal changes and postoperative soft tissue changes, and prediction for long-term soft tissue changes were established through varying statistical methods. The results were as follow : 1. There were meaningful changes of anteroposterior skeletal position at 6 months and 2 years after mandibular set back by mandibular ramus osteotomy. Two years postoperatively, there was 30%, 32%, 29% relapse on B point, pogonion, menton each. 2. Two years after the mandibular ramus osteotomy, the relative changes of the soft tissue to their osseous counterparts showed 76% on the lower lip and 91% on the pogonion. 3. The movements of the mandibular landmarks in correlation to anteroposterior position of the lower lip and soft tissue of the chin showed to be effective on a long-term basis. 4. Using surgical changes of pogonion, prediction of changes in soft and hard tissue pogonion was useful and the coefficient of determination was 0.46 each and their reliability decreased 2 years postoperatively. 5. The upper lip position after the mandibular set back surgery was somewhat anterior 2 years postoperatively, but that has no statistical meanings.

• 대한치과교정학회지
• /
• 제44권4호
• /
• pp.157-167
• /
• 2014

Objective: The purpose of this study was to evaluate the clinical efficacy of polymer- and rhodium-coated wires compared to uncoated wires by measuring the frictional forces using self-ligation brackets. Methods: 0.016-inch nickel titanium (NiTi) wires and $0.017{\times}0.025$-inch stainless steel (SS) wires were used, and the angulations between the brackets and wires were set to $0^{\circ}$, $5^{\circ}$, and $10^{\circ}$. Upper maxillary premolar brackets (Clippy-C$^{(R)}$) with a 0.022-inch slot were selected for the study and a tensile test was performed with a crosshead speed of 5 mm/min. The maximum static frictional forces and kinetic frictional forces were recorded and compared. Results: The maximum static frictional forces and the kinetic frictional forces of coated wires were equal to or higher than those of the uncoated wires (p < 0.05). The maximum static frictional forces of rhodium-coated wires were significantly higher than those of polymercoated wires when the angulations between the brackets and wires were set to (i) $5^{\circ}$ in the 0.016-inch NiTi wires and (ii) all angulations in the $0.017{\times}0.025$-inch SS wires (p < 0.05). The kinetic frictional forces of rhodium-coated wires were higher than those of polymer-coated wires, except when the angulations were set to $0^{\circ}$ in the 0.016-inch NiTi wires (p < 0.05). Conclusions: Although the frictional forces of the coated wires with regards to aesthetics were equal to or greater than those of the uncoated wires, a study under similar conditions regarding the oral cavity is needed in order to establish the clinical implications.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.305-312
• /
• 2010

The aim of this study is to find an analytic solution to the problem of determining the optimal capacity of a batch-storage network to meet demand for finished products in a system undergoing joint random variations of operating time and batch material loss. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to joint random variations in the cycle time and batch size. The production processes have also joint random variations in cycle time and product quantity. The spoiled materials are treated through regeneration or waste disposal processes. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced. The proposed method has the potential to rapidly provide very useful data on which to base investment decisions during the early plant design stage. It should be of particular use when these decisions must be made in a highly uncertain business environment.

• 농업생명과학연구
• /
• 제46권1호
• /
• pp.105-111
• /
• 2012

본 연구는 딸기 '설향' 품종의 화방별 착과순서에 따른 과중 및 당도의 변화를 조사하여 각 화방별로 착과량 조절 기준의 타당성을 검정하고자 하였다. 1화방은 2, 3화방에 비하여 착과수, 과중, 당도, 대과성 과실의 비율이 높았다. 동일 화방 내에서도 상위 과실은 하위에 착과된 과실보다 과중이 증가하였고, 당도도 높았다. 과실의 과중이 증가할수록 당도가 증가하여 과중과 당도는 높은 정의 상관관계를 보였다. 설향 품종의 각 화방별 적정 착과수는 1화방 9~10개, 2화방 6개, 3화방 4개, 4화방 3개 정도 착과시키는 것이 상품수량을 증가시킬 수 있을 것으로 생각된다.

• 한국의상디자인학회지
• /
• 제25권4호
• /
• pp.93-106
• /
• 2023

The study is to develop and present a leggings pattern that is suitable for the human body by using a standard body type avatar for a female in her 30s. As a research method, the average body type was selected from adult women in their 30s, and the appearance was evaluated using the CLO software program. The data analysis of this study compared the dimensions and shape of each part by legging. The leggings pattern suggested based on the above research results was determine to be a total length of 80.6cm and hip length of 24cm, and the knee length was set by dividing the legging in half from the waist to the hem and then adding 5cm. These figures were evaluated higher than Company D in terms of the adequacy of the upper part of the front and rear plates of Company A as well as the adequacy of the knee lines. Company A's figures were applied and corrected. For the front plate, the waist circumference was divided by 4, and 3.5cm was removed, and the hip circumference was set by dividing the hip circumference by 4, and 3.8cm was removed. In the appearance evaluation results Company D was highly evaluated in the suitability evaluation of the waist and hips, and the waist and hips were set using the pattern of Company D. The length of the front panel was modified by dividing the hip circumference by 4 and adding 1.8cm to the length, and the length of the back panel was modified by dividing the hip circumference by 3 and adding 8cm after dividing the hip circumference by 0.8cm.

• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.