• Journal of information and communication convergence engineering
• /
• 제12권3호
• /
• pp.135-139
• /
• 2014

Opportunistic routing was originally introduced in various multihop network environments to reduce the number of hops in such a way that, among the relays that decode the transmitted packet for the current hop, the one that is closest to the destination becomes the transmitter for the next hop. Unlike the conventional opportunistic routing case where there is a single active S-D pair, for an ad hoc network in the presence of fading, we investigate the performance of parallel opportunistic multihop routing that is simultaneously performed by many source-destination (S-D) pairs to maximize the opportunistic gain, thereby enabling us to obtain a logarithmic gain. We first analyze a cut-set upper bound on the throughput scaling law of the network. Second, computer simulations are performed to verify the performance of the existing opportunistic routing for finite network conditions and to show trends consistent with the analytical predictions in the scaling law. More specifically, we evaluate both power and delay with respect to the number of active S-D pairs and then, numerically show a net improvement in terms of the power-delay trade-off over the conventional multihop routing that does not consider the randomness of fading.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.711-717
• /
• 2007

Location information will become increasingly important for future Pervasive Computing applications. Location tracking system of a moving device can be classified into two types of architectures: an active mobile architecture and a passive mobile architecture. In the former, a mobile device actively transmits signals for estimating distances to listeners. In the latter, a mobile device listens signals from beacons passively. Although the passive architecture such as Cricket location system is inexpensive, easy to set up, and safe, it is less precise than the active one. In this paper, we present a passive location system using Cricket Mote sensors which use RF and ultrasonic signals to estimate distances. In order to improve accuracy of the passive system, the transmission speed of ultrasound was compensated according to air temperature at the moment. Upper and lower bounds of a distance estimation were set up through measuring minimum and maximum distances that ultrasonic signal can reach to. Distance estimations beyond the upper and the lower bounds were filtered off as errors in our scheme. With collecting distance estimation data at various locations and comparing each distance estimation with real distance respectively, we proposed an equation to compensate the deviation at each point. Equations for proposed algorithm were derived to calculate relative coordinates of a moving device. At indoor and outdoor tests, average location error and average location tracking period were 3.5 cm and 0.5 second, respectively, which outperformed Cricket location system of MIT.

• 소성∙가공
• /
• 제17권1호
• /
• pp.27-34
• /
• 2008

In order to manufacture a doubly curved sheet metal, the incremental roll forming process which adopts advantages such as the flexibility of the incremental forming process and continuous bending deformation of the roll forming process has been experimentally investigated. An experimental equipment was developed which was named as unit roll set (URS) consisting of two pairs of support rolls and an upper center roll. The upper roll equipped with the servo control unit is motor-driven and can be positioned in the vertical direction according to the user's commands. Four support rolls are idle, and they freely rotate only along the axis so as to transfer the plate more stably in the tangential direction of the rotation of the driving roll. In the process, the plate is deformed incrementally as deformation proceeds simultaneously in longitudinal and transverse directions. Through the experiments using URS, information regarding to forming schedules is found out to fabricate curved hull plates. This study demonstrates the further application of the incremental roll forming process in shipbuilding industries.

• 천문학논총
• /
• 제30권2호
• /
• pp.309-313
• /
• 2015

If the present universe is slightly open then pre-inflation curvature would appear as a cosmic dark-flow component of the CMB dipole moment. We summarize current cosmological constraints on this cosmic dark flow and analyze the possible constraints on parameters characterizing the pre-inflating universe in an inflation model with a present-day very slightly open ${\Lambda}CDM$ cosmology. We employ an analytic model to show that for a broad class of inflation-generating effective potentials, the simple requirement that the observed dipole moment represents the pre-inflation curvature as it enters the horizon allows one to set upper and lower limits on the magnitude and wavelength scale of pre-inflation fluctuations in the inflaton field and the curvature parameter of the pre-inflation universe, as a function of the fraction of the total initial energy density in the inflaton field. We estimate that if the current CMB dipole is a universal dark flow (or if it is near the upper limit set by the Planck Collaboration) then the present constraints on ${\Lambda}CDM$ cosmological parameters imply rather small curvature ${\Omega}_k{\sim}0.1$ for the pre-inflating universe for a broad range of the fraction of the total energy in the inflaton field at the onset of inflation. Such small pre-inflation curvature might be indicative of open-inflation models in which there are two epochs of inflation.

• 핵의학기술
• /
• 제26권1호
• /
• pp.42-46
• /
• 2022

핵의학과 검체검사에서 시행되는 모든 정량 검사는 정확도와 정밀도를 고려하여 측정가능범위 및 임상보고 가능범위가 설정되어 있다. 측정가능범위를 벗어난 검체는 희석 실험을 시행하여 최종 검사 결과를 보고해야 한다. 그동안 희석을 진행하는 검체의 수가 많지 않았고, 검사 종목별 희석액이 시약 마다 달라 검사자가 실험 종목마다 적절한 희석배수를 정하여 결과를 보고하는 데 어려움이 있었다. 이에 따라 RIA 검사별 최대 희석배수의 설정 및 임상보고가능범위의 상한치 검증이 필요하다고 판단되었다. 본 연구에서는 KOLAS를 바탕으로 설정된 임상보고 가능범위의 상한치를 검증하였고 그에 따른 각 종목의 최대희석배수를 설정하였다. 서울아산병원에서 시행하고 있는 모든 RIA 검사 중 희석하는 30종의 검사종목을 대상으로 연구를 진행하였다. 2021년 3월부터 7월까지 총 4개월간의 자료를 종목별로 취합하여 분석하였다. 각 검체는 검사 항목별 Kit 내 기재된 희석방법에 따라 D.W, Kit 내 전용 Diluent 혹은 0 Standard로 희석하였으며 2배, 4배 및 10, 10², 10³, 10⁴ 등의 계단희석을 진행한 검체를 대상으로 하였다. 실험 결과의 유효성을 확인할 수 있는 지표로 실측값을 기댓값으로 나눈 백분율을 사용하였다. 본 연구에서는 백분율 허용범위를 80~120%로 설정하였으며 이를 만족한 실험 결과를 연구의 표본이 되는 N값으로 설정하였다. 총 30종의 검사항목 중 백분율 허용범위에 속하는 N값의 수가 5개 이상인 종목은 19종목이었다. 희석배수의 검증 결과 10⁴로 설정된 검사는 𝛼-fetoprotein, Thyroglobulin으로 2종목이며, 10³으로 설정된 검사는 CA-125, CEA, 𝛽-hCG로 3종목, 10²으로 설정된 검사는 Free PSA, PSA, CA15-3, SCC, Ferritin, PTH, Cortisol, Calcitonin, Aldosterone 으로 9종목이다. 10으로 설정된 검사는 𝛽2-Microglobulin, C-peptide, Testosterone 3종목이 있다. 남은 2종목인 Renin Activity와 Follicle Stimulation Hormone은 각각 2배, 4배로 설정하였다. 그 외 특이사항이 있는 항목은 11종목으로 허용범위를 벗어난 결과가 섞여 있어 표본이 부족하거나 희석검체 수가 부족하여 값을 설정하기 어려웠다. 이러한 종목들은 기존 자료를 토대로 희석배수를 설정하였고, 추후 자료를 수집하여 허용범위 내에 속하는 N값의 수가 충족된다면 희석배수를 재설정할 계획이다. 본 연구를 통해 임상보고 가능범위를 실증적 방식으로 검토하고, RIA 검사별 적절한 희석배수를 표준화함으로써 핵의학 검사의 경제성을 높이고, 연구를 통해 검증된 임상보고 가능범위 내에서 더욱 정확한 희석검사결과를 도출하는 데 도움이 되고자 하였다. 이를 통해 핵의학 혈액검사의 전반적인 질 향상을 기대해 볼 수 있으리라 사료된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.382-386
• /
• 2009

This paper describes design and analysis techniques of cold forging process for precise producing of T-200 type spider made of SCr420H by utilizing pneumatically operated enclosed die set. Since deducing feasible closing force is an important factor to optimize entire pneumatically operated cold forging system, a series of FE analyses with varying the number of gas cylinders has been carried out to investigate the influence of closing force upon the direction of applied load at die surfaces. It also reveals the optimum distribution of the gas cylinders in terms of the flatness of upper/lower plates.

• 한국전산응용수학회:학술대회논문집
• /
• 한국전산응용수학회 2003년도 KSCAM 학술발표회 프로그램 및 초록집
• /
• pp.7-7
• /
• 2003

We studied closed set-valued Choquet integrals in two papers(1997, 2000) and convergence theorems under some sufficient conditions in two papers(2003), for examples : (i) convergence theorems for monotone convergent sequences of Choquet integrably bounded closed set-valued functions, (ii) covergence theorems for the upper limit and the lower limit of a sequence of Choquet integrably bounded closed set-valued functions. In this presentation, we consider fuzzy number-valued functions and define Choquet integrals of fuzzy number-valued functions. But these concepts of fuzzy number-valued Choquet inetgrals are all based on the corresponding results of interval-valued Choquet integrals. We also discuss their properties which are positively homogeneous and monotonicity of fuzzy number-valued Choquet integrals. Furthermore, we will prove convergence theorems for fuzzy number-valued Choquet integrals. They will be used in the following applications : (1) Subjectively probability and expectation utility without additivity associated with fuzzy events as in Choquet integrable fuzzy number-valued functions, (2) Capacity measure which are presented by comonotonically additive fuzzy number-valued functionals, and (3) Ambiguity measure related with fuzzy number-valued fuzzy inference.

• 수산해양기술연구
• /
• 제22권3호
• /
• pp.1-7
• /
• 1986

This is a basic study of further investigating the effect of oceanographic conditons, such as bottom profile, currents, and temperature, to the fish migrating course around the set-net. The survey was held at Dojang Po, southern part of Geoje Island, from July to October in 1985. There was a sea valley of which depth was 20 to 40 meters around the set-net. Near the bottom of that sea valley, there was different current pattern to the upper layer. In the sea calm condition of July and October, the vertical profiles of current and water temperature were simple. But in rough condition of September, they were complicated because of wind tuburance.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.565-572
• /
• 1996

The purpose of this study was to measure partial heat resistance of Hanbok when it worn. Since Hanbok varies from season to season, four different set of Hanboks (R, SN, p and S) were tested. Also Durumagi (D) which is worn over Hanbok (5) to keep warm from winter cold was tested as well. The thermal manikin was used in this experiment. The room temperature, air velocity and the relative humidity was set at $20\pm0.5^{\circ}C$, 0.15 m/sec and $50\pm$5% respectively. The mean skin temperature of the manikin was set at $33\pm0.5^{\circ}C$. The results were as follows: 1. The order from the least total heat resistance to the most was SN, R, p, 5 and D. 2. Upper arms had the highest heat resistance among the 13 parts. The next was abdomen thighs, buttock, legs, forearms and chest, back, and head, the order from the most to the least.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.672-674
• /
• 2000

There are various ways in classification methodologies of data mining such as neural networks but the result should be explicit and understandable and the classification rules be short and clear. Rough set theory is a effective technique in extracting knowledge from incomplete and inconsistent information and makes an offer classification and approximation by various attributes with effect. This paper discusses granularity of knowledge for reasoning of uncertain concepts by using generalized rough set approximations based on hierarchical granulation structure and uses hierarchical classification methodology that is more effective technique for classification by applying core to upper level. The consistency rules with minimal attributes is discovered and applied to classifying real data.