• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.7-12
• /
• 1984

This study was undertaker to observe the longitudinal change by orthodontic treatment for early Class III malocclusion in primary and mixed dentition. Cephalometric roentgenograms of 8 children with Class III malocclusion obtained during activator therapy were measured and compared with those obtained before activator therapy. The following results were observed. During treatment with activator; 1. The maxilla became retrueded in A,C,E, and K and protruded in F, G, H, and J. 2. The mandible became retruded in A,C,E, and F and F and protruded in H and J. No difference was observed in G and K. 3. Gonial angle became reduced in A,C,E,F, and K and increased in H. No difference was observed in G and J. 4. The steepness of mandibular plane became reduced in C,E,F,G,H, and J and increased in A. No difference was observed in K. 5. The inclination of upper incisor became more labially in A,C,E,G,H,J, and K. No difference was observed in F. 6. The inclination of lower incisor became more lingually in all cases.

• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.71-81
• /
• 2018

Soils are mostly nonhomogeneous and anisotropic in nature. In this study, nonhomogeneity and anisotropy of soil are taken into consideration by assuming that the cohesion increases with depth linearly and also varies with respect to direction at a particular point. A three-dimensional rotational failure mechanism is adopted, and then a three-dimensional stability analysis of slope is carried out with the failure surface in the shape of a curvilinear cone in virtue of the limit analysis method. A quasistatic approach is used to develop stability charts in nonhomogeneous and anisotropic soils. One can easily read the safety factors from the charts without the need for iterative procedures for safety factors calculation. The charts are of practical importance to prevent a plane failure in excavation slope whether it is physically constrained or not. Then the most suitable location of piles within the reinforced slope in nonhomogeneous and anisotropic soils is explored, as well as the interactions of nonhomogeneous and anisotropic coefficients on pile reinforcement effects. The results indicate that piles are more effective when they are located between the middle and the crest of the slope, and the nonhomogeneous coefficient as well as the anisotropic coefficient will not only influence the most suitable location for piles but also affect the calculated safety factor of existing reinforced slope. In addition, the two coefficients will interact with each other on the effect on slope reinforcement.

• Clinical and Experimental Pediatrics
• /
• v.59 no.sup1
• /
• pp.149-151
• /
• 2016

Chiari malformations are a congenital anomaly of the hindbrain. The most common, Chiari malformation type I (CM-I), is characterized by herniation of the cerebellar tonsils extending at least 3 mm below the plane of the foramen magnum. Consequently, CM-I is associated with hydrocephalus and symptoms involving compression of the cervicomedullary junction by ectopic tonsils. Several studies have reported the clinical symptoms associated with CM-I, including suboccipital headache, weakness in the upper extremities, facial numbness, loss of temperature sensation, ataxia, diplopia, dysarthria, dysphagia, vomiting, vertigo, nystagmus, and tinnitus. Syncope is one of the rarest presentations in patients with CM-I. There are many hypotheses regarding the causes of syncope in patients with CM-I; however, the mechanisms are not clearly understood. Although surgical decompression for CM-I in patients with syncope has yielded good clinical results in some studies, such cases are rarely reported. We report a case of orthostatic syncope in a patient with CM-I who was treated with surgical intervention.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.71-74
• /
• 2014

Cancer-related facial pain refractory to pharmacologic management or nondestructive means is a major indication for destructive pain surgery. Stereotactic mesencephalotomy can be a valuable procedure in the management of cancer pain involving the upper extremities or the face, with the assistance of magnetic resonance imaging (MRI) and electrophysiologic mapping. A 72-year-old man presented with a 3-year history of intractable left-sided facial pain. When pharmacologic and nondestructive measures failed to provide pain alleviation, he was reexamined and diagnosed with inoperable hard palate cancer with intracranial extension. During the concurrent chemoradiation treatment, his cancer-related facial pain was aggravated and became medically intractable. After careful consideration, MRI-based stereotactic mesencephalotomy was performed at a point 5 mm behind the posterior commissure, 6 mm lateral to and 5 mm below the intercommissural plane using a 2-mm electrode, with the temperature of the electrode raised to $80^{\circ}C$ for 60 seconds. Up until now, the pain has been relatively well-controlled by intermittent intraventricular morphine injection and oral opioids, with the pain level remaining at visual analogue scale 4 or 5. Stereotactic mesencephalotomy with the use of high-resolution MRI and electrophysiologic localization is a valuable procedure in patients with cancer-related facial pain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1000-1005
• /
• 2003

The shock separation test simulates the environmental effects of the spacecraft separation from launch vehicle. The shock separation test for a structural model of KOMPSAT-Ⅱ(Korea Multi-Purpose SATellite Ⅱ) was performed in SITC(Satellite Integration ＆ Test Center) launch environmental test hall at KARI(Korea Aerospace Research Institute) to verify the shock test requirement of the spacecraft, to predict the induced acceleration responses on the primary structures and payloads by the explosion of pyre-lock and to perform mechanical fit check. The spacecraft with S/A was mated vertically to LV(Launch Vehicle) adapter simulator via a clamp band, then hoisted and suspended above a foam test bed by four isolation springs secured to the spacecraft hoist fittings to isolate the payload platform shock wave from the sling elements. For separation process, real pyre-devices were used and the time response signals from 60 accelerometers installed on the interested points was acquired and recorded. The SRS responses for each response channels were calculated and the achieved SRS's on the separation plane was reviewed and evaluated in comparison to the ICD(Interface Control Document) value.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.104-112
• /
• 2013

This study investigates the structural analysis result with vibration and fatigue on 3 kinds of bicycle saddle models. When the static load applies on the upper plane of model, maximum stress becomes within the allowable stress in case of model 1. As the value of Stress or deformation becomes lower on the order of model types 1, 2 and 3, these models become more stabilized or safer at durability in this order. On the vibration analysis, model type 1 has the maximum stress or deformation more than 5 times by comparing with model type 1 or 2. Model type 1 becomes most excellent on vibration durability. As maximum displacement due to vibration happens in case of model type 3, it becomes unstabilized. But the stresses of model types 1, 2 and 3 become within the allowable stress and these models are considered to be safe. At the status of the severest fatigue load, model type 3 becomes safer than model type 1 or 2. This study result is applied with the design of safe bicycle saddle and it can be useful to improve the durability by predicting prevention against the deformation due to its vibration and fatigue.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.45-51
• /
• 1982

An endodontically treated tooth is likely to be brittle than a vital tooth. Internal structure of the tooth has been weakened due to a significant removal of dentin by coronal access, canal preparation. There are many controversies concerning with various methods of reinforcing an intact anterior tooth that has endodontic treatment. In this experiment, 128 extracted maxillary anterior teeth were endodontically treated, and prepared with 4 methods of restorations; Composite resin filling with zinc phosphate cement, composite resin filling without zinc phosphate cement, composite resin filling with post, and metal crown with post. An Instron testing machine was used to measure the fracture loads of the specimens. The means of the failure loads for the 4 groups were compared by F-test statistically and the failure modes were observed. The results were as follows; 1. There were no statistically significant difference between the failure loads of the four methods of restoration. 2. Teeth without post were fractured in a horizontal or oblique plane through upper or middle third of the root. 3. In the posted teeth, fractures were occurred around the post. 4. In the metal crowned teeth with post, the fracture were occurred around the post or coronal area.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.285-287
• /
• 2001

We have studied the nonlinear evolution of a magnetized disk of isothermal gas, which is sustained by its self-gravity. Our objective is to investigate how the Jeans, Parker, and convective instabilities compete with each other in structuring/de-structuring large scale condensations in such disk. The Poisson equation for the self-gravity has been solved with a fourth-order accurate Fourier method along with the Green function, and the MHD part has been handled by an isothermal TVD code. When large wavelength perturbations are applied, the combined action of the Jeans and Parker instabilities suppresses the development of the convection and forms a dense core of prolate shape in the mid-plane. Peripheral structures around it are filamentary. The low density filaments connect the dense core to the diffuse upper region. On the other hand, when small wavelength perturbations are applied, the disk develops into an equilibrium state which is reminiscent of the Mouschovias's 2-D non-linear equilibrium of the classical Parker instability under an externally given gravity.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.1
• /
• pp.64-67
• /
• 2005

We report here on an uncommon case of mediastinitis that occurred after central venous catheterization. A patient with colon and jejunal cancer complained high fever, right shoulder pain, chest pain, and limited motion of the affected shoulder just 6 days after central venous catheterization. Bacterial culture of the blood, shoulder abscess, and catheter puncture site revealed methicillin-resistent staphylococcus aureus. Right upper mediastinal widening on chest film also suggested mediatinitis. Mediastiotomy and pus drainage was performed along with adequate antibiotics therapy. In this case, it seems that initially formed bacteria from the puncture site migrated to the mediastinum through the tissue plane to start the mediastinitis. Careful dressing of puncture site and correct handling of catheter is important to prevent this serious complication.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.118-125
• /
• 2008

The deck plates of ship block is made of thin plates in their construction. A main reason of using thin plates is that deck plates don't need to support large structural loads. Therefore, out-of-plane deformations between stiffeners are frequent in deck blocks. Because these are got right by correction heating, they continuously causes quality problems in the final dock-building process. According to preceding research, the lifting process by cranes would offset the effect of correction heating. This study finds out the remained efficiency of correction heating when tensional loads are added by a lifting to corrected parts. We used inherent strains in calculating the efficiency, and established the methodology where the positions for callings are. For getting more accurate positions, besides the structural lifting analysis, welding deformation analysis with upper block and measured data from a serial ship are also referenced.