• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.167-177
• /
• 1986

This study was undertaken to compare the main differences and its effects of the 4 first bicuspid extraction on the face and dental arch of the class II div 1 malocclusion. The subjects consisted of twenty two class II div 1 malocclusion, four males, eighteen females, were 14 Years 2 Months old at the stan of the treatment 16 Year 3 Months old at the end of the treatment. (mean age) Twenty one variables were observed by comparing the statistical data of the pretreatment records with postteratment records, which were consited of eight varibles on the study model digitation, thirteen variables on the tracing of the lateral cephalogram. The following results were obtained. 1. No significant change was observed in the intercanine width. 2. Intercuspal widths of the 1st. premolar and 2nd. premolar were decreased. 3. Change of the overjet was dependant upon upper anterior rather than lower anterior. 4. No significant changes were observed in facial plane angle and ANB angle. 5. Uprighting of the lower 1st. molar had an effect on the increase of the facial height.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.3
• /
• pp.59-72
• /
• 2009

The purpose of this study was to establish objective data for marketing of industries and product development design by researching popular singer fashion of Korea, investigating the preference for popular singer design in street fashion among adolescents on the basis of the research, and drawing an conclusion. To analyze street fashion, total 190 young men and women in their 20s, including teenagers, were surveyed mainly in downtowns around Daehakro, Gangnam and Hongik University. First, in relation to the upper garment, men were found to wear T-shirts and hood T-shirts the most, while women were found to wear T-shirts and one-piece dress the most. Second, in relation to the lower garment, the ratio of those who wore skinny clothes was high both among men and women. Third, in relation to the outer apparel, the ratio of men who wore casual jacket and hood zip-up was high, while the ratio of women who wore tailored jacket and leather jacket was high. Fourth, in relation to shoes, the ratio of men who wore sports shoes was high, while the ratio of women who wore heeled-shoe was high. Fifth, it was found that plane pattern was preferred the most. As it was stated above, the findings of this study on the effect of entertainers' fashion on adolescents through street fashion indicated that the number of adolescents who imitate the fashion of entertainers increased.

• Journal of architectural history
• /
• v.22 no.1
• /
• pp.41-50
• /
• 2013

In Korea, only a few wooden pagodas are extant because some wooden pagodas were lost due to artificial environment like war. Fortunately, only Eight Depictions Hall(Palsangjeon) in Beobjusa temple and main hall of Ssang-Bong Sa the main temple are extant. Though main hall of Ssang-Bong Sa the main temple shows old style in construction and outstanding creativity, survey and investigation for the hall have been poor. Accordingly, this study investigated pillar part, bracket structure part, and roof part composing pagoda body section which actively reflects structure and design skill compared to floor or upper part. And for better understanding, in the part that is similar to pagoda body section of main hall or needs examples, wooden pagoda in China or Japan was referred. Through this investigation, it was known that unique skill applied to main hall of Ssang-Bong Sa the main temple is based on plane in one room ${\times}$ one room - Ssang-Bong Sa the main temple has common form of wooden pagoda in appearance.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.1
• /
• pp.19-29
• /
• 2012

In this study, three isolated interior flat slab-column connections that include three types of shear reinforcement details; stirrup, shear stud and shear band were tested under reversed cyclic lateral loading to observe the capacity of slab-column connections. These reinforced joints are 2/3 scale miniatures designed to have identical punching capacities. These experiments showed that the flexural failure mode appears in most specimens while the maximum unbalanced moment and energy absorbing capacity increases effectively, with the exception of an unreinforced standard specimen. Finally, the results of the experiments, as wel l as those of experiments previously carried out by researchers, are applied to the eccentricity shear stress model presented in ACI 318-08. The failure mode is therefore defined in this study by considering the upper limits for punching shear and unbalanced moment. In addition, an intensity factor is proposed for effective widths of slabs that carry an unbalanced moment delivered by bending.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.221-229
• /
• 2004

In this work, an elastic-plastic stress analysis has been conducted for silicon carbide fiber reinforced magnesium metal matrix composite beam. The composite beam has a rectangular cross section. The beam is cantilevered and is loaded by a single force at its free end. In solution, the composite beam is assumed perfectly plastic to simplify the investigation. An analytical solution is presented for the elastic-plastic regions. In order to verify the analytic solution results were compared with the finite element method. An rectangular element with nine nodes has been choosen. Composite plate is meshed into 48 elements and 228 nodes with simply supported and in-plane loading condations. Predictions of the stress distributions of the beam using finite elements were overall in good agreement with analytic values. Stress distributions of the composite beam are calculated with respect to its fiber orientation. Orientation angles of the fiber are chosen as $0^{circ},\;30^{circ},\;45^{circ},\;60^{circ}\;and\;90^{circ}$. The plastic zone expands more at the upper side of the composite beam than at the lower side for $30^{circ},\;45^{circ}\;and\;60^{circ}$ orientation angles. Residual stress components of ${\sigma}_{x}\;and \;{\tau}_{xy}$ are also found in the section of the composite beam.

• Structural Engineering and Mechanics
• /
• v.44 no.1
• /
• pp.15-34
• /
• 2012

In the present paper, an improved high-order theory is used for bending analysis of soft-core sandwich plates. Third-order plate assumptions are used for face sheets and quadratic and cubic functions are assumed for transverse and in-plane displacements of the orthotropic soft core. Continuity conditions for transverse shear stresses at the interfaces as well as the conditions of zero transverse shear stresses on the upper and lower surfaces of the plate are satisfied. Also, transverse flexibility and transverse normal strain and stress of the orthotropic core are considered. The equations of motion and boundary conditions are derived by principle of minimum potential energy. Analytical solution for bending analysis of simply supported sandwich plates under various transverse loads are presented using Navier's solution. Comparison of the present results with those of the three-dimensional theory of elasticity and some plate theories in the literature confirms the accuracy of the proposed theory.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.81-89
• /
• 1996

Quantum RF impedance of SIS (superconductor insulator superconductor) junction has been analyzed by using through on tucker's quantum mixer theory in the frequency range form 80 GHz to 120 GHz. The embedding impedance of waveguide-type mixer mount and its equivalent circuit have been evaluated. From these evaluated results, the impedance matching efficiency between mixer mount embedding impedance and mixer port impedance of upper-side band and IF which were determined by augmented admittance matrix with given backshort position has been discussed in detail. It is found that the mixer with fixed backshort mount ahs a impedance matching efficiency about 80% at each port of mixer within 85GHz to 115GHz, which implys a conversion los of mixer would be good enough to be operated such a wide band frequency range. Therefore, the theoretical evaluated results show that our method can be used ot design the mixer mount without any mechanical tuning elements such a backshort or an E-plane tunners for wide band operation.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.415-423
• /
• 1995

A welded tuff with a near-vertical parataxitic fabric crops out as an elliptical shape($500{\times}350m$) in horizontal section, the Geumseongsan volcanic field. It intrudes the Cretaceous sedimentary rocks of the upper Hayang Group, surge tuff and rhyolite of the Geumseongsan volcanic complex. Generally it displays an ubiquitous, steeply inward-dipping welding foliation, subparallel to the margins of the intrusion, and a subvertically inward-inclined lineation defined by extremely stretched fiammes on the welding foliation plane. These fabrics suggest its overall form may be of an inverted cone-shaped plug representing a flared vent that served as a feeder for extrusive welded ash-flow tuff sheets.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.248-251
• /
• 2000

The fabrication and characteristics of HTS race-track type field coil for generators was carried out. Field coils are composed of 3 pancake coils wound by 37-filamental Bi-2223/Ag-alloy tapes. The winding machine is horizontal type. The critical currents (I$_c$) of the superconducting tapes were measured with variation of bending strain and external magnetic fields. I$_c$ of both whole field coils and 3 pancake coils were measured as a function of temperature. At 77K under the self-field, I$_c$ of whole field coils was 12A, while in the case of middle pancake coil, I$_c$ was 15A. The distribution of magnetic field B was obtained, using 3-D FEM. Our simulation showed that maximums of B${\bot}$A in x-y plane were locally distributed in both the upper and the lower coils. In addition, the fabrication processes and the characteristics of field coil are described.

• Journal of Chest Surgery
• /
• v.22 no.1
• /
• pp.170-175
• /
• 1989

Eleven cases of pulmonary resection had been performed for pulmonary aspergilloma in the department of thoracic and cardiovascular surgery, School of Medicine, Kyungpook National University from August 1984 to July 1988. The patients were consisted of six males and five females and were evenly distributed from third decade to sixth decade. Hemoptysis was usually presenting symptom [72.2%] and the variable was the interval between symptom onset to surgical resection, which was ranged from few months to several years In the plane chest films, intracavitary fungus balls were noted in five cases [5/11] and upper lobe involvements were seven cases [7/11]. Aspergillus fumigatus was identified preoperatively in three cases among the eight cases of sputum culture. Mean preoperative FVC and FEV 1.0 values were in normal range. Eleven pulmonary resections were done by eight lobectomies, two segmentectomies and one pneumonectomy. The lesion was superimposed upon old tuberculosis in eight patients, in one upon bronchiectasis and in two upon tuberculous bronchiectasis. Five complications appeared postoperatively which included ARDS [1 case] bleeding [2 cases], persistent air leak[1 case], and dead space [1 case].