• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.516-530
• /
• 1999

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.

• Steel and Composite Structures
• /
• v.34 no.3
• /
• pp.321-332
• /
• 2020

The loss of composite action at the hogging moment zone for a continuous composite girder reduces the girder stiffness and strength. This paper presents an experimental investigation of the use of an ultra-high performance concrete (UHPC) slab at the hogging moment zone and a normal concrete (NC) slab at the sagging moment zone. The testing was conducted to verify the level of loading at which composite action is maintained at the hogging moment zone. Four two-span continuous composite girders were tested. The thickness of the UHPC varied between a half and a full depth of slab. The degree of shear connection at the hogging moment zone varied between full and partial. The experimental results confirmed the effectiveness of the UHPC slab to enhance the girder stiffness and maintain the composite action at the hogging moment zone at a load level much higher than the upper service load limit. To a lesser degree enhanced performance was also noted for the smaller thickness of the UHPC slab and partial shear connection at the hogging moment zone. Plastic analysis was conducted to evaluate the ultimate capacity of the girder which yielded a conservative estimation. Finite element (FE) modeling evaluated the girder performance numerically and yielded satisfactory results. The results indicated that composite action at the hogging moment zone is maintained for the degree of shear connection taken as 50% of the full composite action and use of UHPC as half depth of slab thickness.

• Journal of Environmental Science International
• /
• v.3 no.3
• /
• pp.217-228
• /
• 1994

The climatological study of temperature inversion was conducted at the Tsukuba of Japan during the cold half year, the periods of which were both from October 1981 through March 1982 and from October 1982 through March 1983. Meteorological phenomena were observed to appear both from l0m to 200m above the ground and from the surface to 300hPa. The data collected from those phenomena were analyzed in terms of statistics and investigated from a synoptic point of view. The results are as follow. The dispersion of the surface inversion happens right after sunrise through the whole period. The higher the upper layer is, the later that happens. Up to a height of 200m, the wind speed at a height of 25m has the greatest effect on temperature, but on the other hand the wind speed at a height of l0m has the greatest effect on inversion intensity.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.829-834
• /
• 2005

A series of reinforced G109 type specimens was fabricated and pended with a 15 weight percent NaCl solution. Mix design variables included 1) two cement alkalinities (equivalent alkalinities of 0.32 and 1.08), 2) w/c 0.50 and 3) two rebar surface conditions (as-received and wire-brushed). Potential and macro-cell current between top and bottom bars were monitored to determine corrosion initiation time. Once corrosion was initiated, the specimen was ultimately autopsied to perform visual inspection, and the procedure included determination of the number and size of air voids along the top half of the upper steel surface. This size determination was based upon a diameter measurement assuming the air voids to be half spheres or ellipse. The followings were reached based upon the visual inspection of G109 specimens that were autopsied to date. First, voids at the steel-concrete interface facilitated passive film breakdown and onset of localized corrosion. Based upon this, the initiation mechanism probably involved a concentration cell with contiguous concrete coated and bare steel serving as cathodes and anodes, respectively. Second, the corrosion tended to initiate at relatively large voids. Third, specimens with wire-brushed steel had a lower number of voids at the interface for both cement alkalinities, suggesting that air voids preferentially formed on the rough as-received surface compared to the smooth wire brushed one.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2002.05a
• /
• pp.111-116
• /
• 2002

The regularity effect for printed word recognition and naming depends on ambiguities between single letters (small grain-size) and their phonemic values. As a given word is repeated and becomes more familiar, letter-aggregate size (grain-size) is predicted to increase, thereby decreasing the ambiguity between spelling pattern and phonological representation and, therefore, decreasing the regularity effect. Lexical decision and naming tasks studied the effect of repetition on the regularity effect for words. The familiarity of a word from was manipulated by presenting low and high frequency words as well as by presenting half the stimuli in mixed upper- and lowercase letters (an unfamiliar form) and half in uniform case. In lexical decision, the regularity effect was initially strong for low frequency words but became null after two presentations; in naming it was also initially strong but was merely reduced (although still substantial) after three repetitions. Mixed case words were recognized and named more slowly and tended to show stronger regularity effects. The results were consistent with the primary hypothesis that familiar word forms are read faster because they are processed at a larger grain-size, which requires fewer operations to achieve lexical selection. Results are discussed in terms of a neurobiological model of word recognition based on brain imaging studies.

• Journal of the Korean Society of Costume
• /
• v.57 no.1 s.110
• /
• pp.176-186
• /
• 2007

The purpose of this study is to reconstruct upper class women's costume of 'Mongol-pung' and 'Goryeo-yang' in a civilization-exchanged period between Mongolia and Korea, for making movie or soap opera costume and historical animation. 'Mongol-pung' was a cultural influence from Mogolia to Korea. For example, sleeveless bi-gap(比甲) and half-sleeved dap-ho(搭忽) were put on by many women at that time. On the basis of old literature, I suggest a 'Mongol-pung' costume as a set of seeran-chulrik(膝欄 terlig), em-broidered bigap, dapho of meat-red color for women. 'Goryeo-yang' was a cultural influence from Korea to Mongolia. Due to old poem of Yuan, 'Short outer Jacket with square neckline, half sleeves, and clear color(方領過腰半臂)' was a representative of 'Goryeo-yang' in Mongolian royal women's costumes. Many women were dressed in it with short inner jacket and wide skirt. In the case of making soap opera costume, the budget of broadcasting station, appearence of nowaday's actor and actress, similarity between old fabric and modern fabric must be considered altogether.

• Journal of the Korean Home Economics Association
• /
• v.41 no.11
• /
• pp.73-80
• /
• 2003

The purpose of this study is to demonstrate the actual somatotype and perceptual somatotype, and to compare actual somaotype with ideal somatotype, and to explore segmentation based on perception of slim/obese somatotype. The respondents included 201 female student volunteers, aged 19 to 27, who were enrolled at university in Busan. Data were analyzed by paired t-test, correlation analysis, cluster analysis, and ANOVA. The results were as follows; The subjects tended to be satisfied with long and slim, slim limbs, and preferred to be tall in height and light in weight. And perceptual somatotype was related to satisfaction of somatotype. Cluster analysis was female college students to identify groups of respondents based on the perception of somatotype(all the body, the upper half of the body, the lower half of the body)difference factors. Based on the finding, three distinct groups were formed: slim tendency group, moderators tendency group, obese tendency group. There were a significant among slim tendency group, moderators tendency group, and obese tendency group base on the perceptual somatotype. There were significant differences among the three groups in terms of perception of somatotype and satisfaction of somatotype.

• Fashion & Textile Research Journal
• /
• v.13 no.1
• /
• pp.7-16
• /
• 2011

Maximalism is the code which has a power to interpret a fashion phenomenon expressed complexly and variously in the multicultural society. In the 21st century, maximalism which reappeared is not the expression by a method only. It is presenting the experimental design for the new pursuit through the mixture such as expansion, splendor, variety, decoration, distortion of configuration or transformation, and composition. Therefore, this study aims at analyzing expression of fashion design by four types(expansion, decoration, mixture, non-structure) materializing a feature of maximalism expressed in the domestic and foreign collection works from 2005 to 2010. The research results are as follows. 1. Expansion: It was showed artificial, formative, unique, and odd teatures through the expansion of the upper half of the body, the lower half of the body, and both of them. 2. Decoration: It was showed the actual decoration considering functionality and practicality and the decoration emphasizing and unique character and featuring domination and emphasis. 3. Mixture: It was showed through the mixture of the contrary textiles or the different sex image. 4. Non-structure: It showed the non-structure of the avant-garde trend and non-structure through decoration, detail, adjustment direction of a dress.

• 한국해양학회지
• /
• v.17 no.2
• /
• pp.59-68
• /
• 1982

Vertically homogeneous water was found around the convex coast of Jeju Island on its west side from hydrographic surveys conducted in June and Ictober 1980, and June 1981. This is the first time that this hydrographic structure is observed. Historical data do not show this water, since they wewe taken far from the island. The presence of this homogeneous water is explained in terms of tidal mexing for the lower half of the water column and relling for the upper half of the columa which conserve vorticity as currints flow clockwise around the island. Direct measurement in future is required to prove the upwelling mechanism.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.199-207
• /
• 2001

The segmented TMA T-loop spring, used for reciprocal space closure and described by Burstone, was used to achievebodily movement of canine. Photoelastic analysis is a technique for the transformation of internal stress into visible light patterns. The two-dimensional photoelastic stress analysis was performed, and stress distribution was recorded by photography. The purpose of this study was to visualize photoelastically the distribution of forces transmitted to the alveolus and surrounding structures using new segmented TMA T-loop spring for canine retraction. The results were as follows: 1. Decreased activation produced decreased stress of upper 1st. premolar extraction site and increased intrusive stress of upper 1st. molar, regardless of T-loop position. 2. At 5mm activation, More posterior positioning of T-loop Produced an increased stress in upper 1st. premolar extraction site. 3. At 3mm activation, More posterior positioning of T-loop produced an increased stress in upper 1st. premolar extraction site and mesial lower half of upper 1st. molar mesio-buccal root. 4. At 1mm activation, More anterior positioning of T-loop produced an increased stress in upper mesial and blew apex area of upper canine root. 5. 0.25 B/L ratio and 3mm activation produced bodily movement of canine. To summarize, desired tooth movement and anchorage requirement is possible by altering the activation and mesio-distal position of the T-loop spring.